Black Outdoor Ceiling Fan – Hunter ceiling fans are without doubt the most effective you can purchase, have a look at have come up with all the information you will need to understand ceiling fans before purchasing, please please remember there are additional ceiling fan manufacturers available who copy Hunter ceiling fan designs but you are nowhere close to good, materials they’ll use usually are not as excellent plus they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so even though many ceiling fans may look “just like a Hunter,” remember all ceiling fans usually are not created equal. Most Hunter ceiling fans have a very reverse option which can be particularly important to reduce heating bills in the winter months, warm air can be directed down to where it’s essental to spinning the ceiling fan clockwise. Some points to take into account when selecting a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to nobody. One from the secrets of proper air movement is blade pitch. The greater the pitch-the angle from the blade-the harder the air movement providing the blade pitch may be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and do not use big enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the stress on undersized or under-powered motors. Many fans likewise use extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes plus the number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move very little air, leading to very inefficient fans, Hunter fans are built to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the consequence of poor engineering design along with a insufficient precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, although they are perhaps the most common source of operating noise. A insufficient proper dampening between metal parts also can create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the most effective materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets also can wobble. Inconsistent blade supports can make varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble through the very heart from the fan. Inexpensive mounting systems with pin fasteners also can help with wobble. Hunter fans have a very patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly placed on/off pull chains can become faulty and turn into pulled out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to advertise. Defective motor windings can lead to electrical shorts inside the motor. Low quality fan bearings could possibly be “shielded” on the one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and dark spots set out to appear. You may even spot the brass around the fan can be a different colour compared to light kit you only added! Quality brass as well as other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, avoid the fan. Can you are feeling a smooth protective coating? That’s a sign from the kind of quality you’ll find inside the famous Hunter Bright Brass Finish.
What will be the minimum height I need in my room to put up a fan? Safety standards declare that the min height through the floor for the bottom from the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really be sure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that kind of record to square on. So you get the peace of mind of knowing you have the most effective-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the harder air that is being moved. The air moved by the fan results in a wind chill effect that creates you are feeling more at ease inside a warm room. There can be a direct relationship between air movement and comfort – the harder air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with a few additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, focus on optimal air delivery. How do I know very well what size fan to buy – there are so many sizes available? You need to select the right size fan for a room to have optimum looks, comfort as well as savings. If the fan is just too small for that room, it won’t move enough air to make you are feeling comfortable. If the fan is just too big, it could possibly move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do a little fans require oil yet others don’t? The Hunter Original includes a very unique motor which uses an oil-bath lubrication system. This system keeps the key bearings lubricated always, for quiet operation and long-life. It is part from the reason this fan includes a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique inside the market when compared with all other fans? The Hunter Original will be the most unique ceiling fan around the market, having a design that goes for the turn from the 20th century. Cast iron is utilized inside the motor housing construction to more efficiently draw heat away through the electrical windings; heat can be a major enemy of electrical motors. The extra weight from the cast-iron construction also decreases the potential for fan wobble. The motor is also bigger than another ceiling fan, rendering it the best motor available. This allows the blades being pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components from the motor, and prolongs the life span from the motor. Added up, these unique design elements produce a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the space – would they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it does not lower the space temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It will be the feeling you receive once you open the window inside a moving car. If you have a very ceiling fan inside a room whose temperature is 80 degrees, running the fan can make a wind chill effect that creates you are feeling just as if the temperature is 72 degrees. When used in conjunction with an ac, a ceiling fan can lower energy costs, since you can set the thermostat of the ac with a higher temperature.
Can the ceiling fan be used in the winter months for almost any beneficial purpose? A ceiling fan may help lower energy consumption in the winter months by up to 15%. The temperature from the air inside a heated room varies in layers; the air near the ceiling is warmer compared to air near the floor, because warm air rises. A ceiling fan may help push the warmer air that is trapped near the ceiling back down into the space, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it’s needed, and also the furnace won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan must be run inside a clockwise direction. This pushes the air facing the ceilings and on the walls, to carefully re-circulate the warm air without setting up a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on broadband will consume less power when compared to a 100-watt lamp. How much can I anticipate to save in heating as well as cooling costs? A ceiling fan can help to save up to 95% on cooling costs for a new install and 47% while on an existing ac system. It also can save up to 15% on heating costs. Savings will be different depending on energy rates. How easy can be a ceiling fan to setup? Most people can get an electrician to setup a ceiling fan, it can be a DIY project but please bear in mind you will need being able to: Locate a 2″ x 4″ or another suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included by the fan warranty – how does the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for that stated life from the warranty; that is, a 20-year warranty will cover the motor parts for 20 years. Labour for that motor is normally covered for 1-year, as are parts and labour for all other components from the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with over 115 years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans can be adjusted with an accessory remote control sold separately through the fan. In fact, remotes will surely improve the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible through the comfort of the favourite chair or bedside table. Ceiling fan and light-weight remotes can easily be installed either while using fan during new installations or on fans which has been previously installed along with use for quite a while. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan along with a receiver which either conceals within the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away through the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans can be placed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest for the ceiling which provides coverage for the electrical box) which may be built to accommodate sloped ceilings. Many quality fans should include this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included while using fan at original purchase, accessory canopy adapters can be bought separately at retail stores. What length drop rod should I use with my fan? Will the fan be more prone to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for that dimension from the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the potential for wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus an inferior clock pendulum having a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it’s inside a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that won’t produce a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan along with a light kit be controlled through the same wall switch? The answer here depends upon how your wall switch is now wired. If you have a very single wall switch with two wires (one black, one white), the answer then is “no” if you don’t buy a control created for this type of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up inside the single wall switch and buy a more common, dual control that may operate a fan and light-weight separately from a single switch. Having an electrician use a third wire can be expensive. What will be the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet higher than the floor. Extension drop rods are employed to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to put the fan at 8 feet (one foot must be allowed for that distance through the top from the fan motor for the switch housing bottom.