Old Ceiling Fans Stock Photo Picture And Royalty Free Image Image intended for size 1300 X 975Old Ceiling Fans – Hunter ceiling fans are without a doubt the best you can get, have a look at have come up with every piece of information you need to learn about ceiling fans before purchasing, please bear in mind that there are many ceiling fan manufacturers available who copy Hunter ceiling fan designs but they are nowhere close to as good, the materials they’ll use are certainly not as high quality and so they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so even though many ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not built the same. Most Hunter ceiling fans have a reverse option which can be especially important to lessen heating bills in the winter months, hot air can be directed right down to where it’s needed by spinning the ceiling fan clockwise. Some points to think about when buying a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to nobody. One with the secrets to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the higher mid-air movement providing the blade pitch continues to be properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and use big enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the worries on undersized or under-powered motors. Many fans likewise use extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes plus the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, but they also move little or no air, resulting in very inefficient fans, Hunter fans are designed to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the results of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, although these are a standard source of operating noise. A lack of proper dampening between metal parts could also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans just use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that are certainly not matched in carefully weighed and balanced sets could also wobble. Inconsistent blade supports can cause varying levels of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that could easily escape balance, generating wobble from the very heart with the fan. Inexpensive mounting systems with pin fasteners could also bring about wobble. Hunter fans have a patented wobble free canopy which means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly placed on/off pull chains can be faulty and be brought out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to market. Defective motor windings can result in electrical shorts inside the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and liver spots set out to appear. You may even notice the brass on the fan can be a different colour as opposed to light kit you merely added! Quality brass and other metallic finishes will include a compilation of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, steer clear of the fan. Can you’re feeling an easy protective coating? That’s a sign with the kind of quality you will find inside the famous Hunter Bright Brass Finish.
What may be the minimum height I need in my room to put up a follower? Safety standards suggest that the min height from the floor towards the bottom with the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that sort of record to stand on. So you receive the peace of mind of knowing you’ve got the best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, greater air which is being moved. The air moved through the fan produces a wind chill effect that produces you’re feeling much more comfortable inside a warm room. There can be a direct relationship between air movement and comfort – greater air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with some additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag on the motor, slowing the RPM with the blades, which decreases the CFM. All Hunter fans, whether four or five blades, focus on optimal air delivery. How do I understand what size fan to purchase – there are numerous sizes available? You need to choose the best size fan for any room to obtain optimum looks, comfort and energy savings. If the fan is just too small for the room, it won’t move enough air to make you’re feeling comfortable. If the fan is just too big, it could move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why perform some fans require oil yet others do not? The Hunter Original includes a very unique motor that uses an oil-bath lubrication system. This system keeps the key bearings lubricated at all times, for quiet operation and long-life. It is part with the reasons why this fan includes a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside the market in comparison with other fans? The Hunter Original may be the most unique ceiling fan on the market, having a design that goes back towards the turn with the twentieth century. Cast iron can be used inside the motor housing construction to more efficiently draw heat away from the electrical windings; heat can be a major enemy of electrical motors. The extra weight with the cast-iron construction also cuts down on the potential for fan wobble. The motor can also be bigger than some other ceiling fan, which makes it the most powerful motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components with the motor, and prolongs the life with the motor. Added up, these unique design elements create a powerful, quiet fan which is backed by way of a limited lifetime warranty.
How do fans cool the space – can they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; no lower the space temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on your skin. It may be the feeling you receive when you open your window inside a moving car. If you have a ceiling fan inside a room whose temperature is 80 degrees, running the fan can cause a wind chill effect that produces you’re feeling as though the temperature is 72 degrees. When found in conjunction by having an air conditioner, a ceiling fan can lower energy costs, since you can set the thermostat of your respective air conditioner with a higher temperature.
Can the ceiling fan supply in the winter months for virtually any beneficial purpose? A ceiling fan can help lower energy consumption in the winter months by as much as 15%. The temperature with the air inside a heated room varies in layers; mid-air close to the ceiling is warmer as opposed to air close to the floor, because hot air rises. A ceiling fan can help push the warmer air which is trapped close to the ceiling back down into the space, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it’s needed, as well as the furnace won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan must be run inside a clockwise direction. This pushes mid-air up against the ceilings and along the walls, to softly re-circulate the hot air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run using very fast will consume less power than a 100-watt light bulb. How much can I be prepared to save in heating or cooling costs? A ceiling fan can help to conserve as much as 95% on cooling costs for any new install and 47% on an existing air cooling system. It could also save as much as 15% on heating costs. Savings vary according to energy rates. How easy can be a ceiling fan to put in? Most people will get a mason to put in a ceiling fan, it can be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ or another suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is included through the fan warranty – so how exactly does the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for the stated life with the warranty; which is, a 20-year warranty will take care of the motor parts for 20 years. Labour for the motor is mostly covered for 1-year, as are parts and labour for other components with the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company craigs list 115 many years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans can be adjusted by having an accessory handy remote control sold separately from the fan. In fact, controllers can definitely increase the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible from the comfort of your respective favourite chair or bedside table. Ceiling fan and lightweight controllers can easily be installed either with the fan during new installations or on fans which have been previously installed and in use for quite a while. The installation is a simple, do-it-yourself project and won’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands towards the fan as well as a receiver which either conceals inside fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away from the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans can be placed on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest towards the ceiling which takes care of the electrical box) which continues to be made to accommodate sloped ceilings. Many quality fans will incorporate such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included with the fan at original purchase, accessory canopy adapters are offered separately at stores. What length drop rod should I use with my fan? Will the fan become more susceptible to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for the dimension with the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod in order to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the potential for wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a smaller clock pendulum having a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it’s inside a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by way of a certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that won’t create a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum given that they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled from the same wall switch? The answer here depends upon how your wall switch is currently wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” until you get a control specifically designed for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and get a more common, dual control which will operate a follower and lightweight separately from an individual switch. Having a mason use a third wire can be expensive. What may be the difference in having a ceiling fan installed close towards the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot has to be allowed for the distance from the top with the fan motor towards the switch housing bottom.
