Cool Ceiling Fans – Hunter ceiling fans are undoubtedly the most effective you can buy, here we have put together every piece of information you might need to learn about ceiling fans before purchasing, please bear in mind that there are other ceiling fan manufacturers available who copy Hunter ceiling fan designs but they’re nowhere close to as good, the type of material they use are not as excellent and they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so although many ceiling fans may look “just just like a Hunter,” remember all ceiling fans are not made the same. Most Hunter ceiling fans use a reverse option that’s particularly significant to reduce heating bills during the cold months, warm air can be directed as a result of where it really is essental to spinning the ceiling fan clockwise. Some points to take into consideration when selecting a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is often a comfort to no person. One in the secrets of proper air movement is blade pitch. The greater the pitch-the angle in the blade-the harder air movement supplying the blade pitch has been properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials , nor use sufficient or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the worries on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes together with number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move little or no air, leading to very inefficient fans, Hunter fans are built to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the consequence of poor engineering design as well as a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, even though they are a standard source of operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans only use the most effective materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade supports can make varying degrees of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get rid of balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans use a patented wobble free canopy meaning Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly set up on/off pull chains may become faulty and become got out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to showcase. Defective motor windings can result in electrical shorts in the motor. Low quality fan bearings could possibly be “shielded” on one hand only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and dark spots start to appear. You may even notice the brass on the fan is often a different colour compared to light kit you just added! Quality brass along with other metallic finishes incorporate a series of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, prevent the fan. Can you are feeling an even protective coating? That’s a sign in the kind of quality you will find in the famous Hunter Bright Brass Finish.
What could be the minimum height I need in my room that will put up a fan? Safety standards claim that the min height through the floor on the bottom in the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really ensure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that kind of record to square on. So you receive the comfort of knowing you have got the most effective-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the harder air that is certainly being moved. The air moved through the fan creates a wind chill effect that makes you are feeling more at ease in a warm room. There is often a direct relationship between air movement and comfort – the harder air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with some additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag on the motor, slowing the RPM in the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are prepared for optimal air delivery. How do I determine what size fan to get – there are numerous sizes available? You need to select the right size fan to get a room to acquire optimum looks, comfort as well as savings. If the fan is too small for that room, it doesn’t move enough air to make you are feeling comfortable. If the fan is too big, it might move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why perform some fans require oil while others tend not to? The Hunter Original carries a very unique motor which uses an oil-bath lubrication system. This system keeps the main bearings lubricated always, for quiet operation and long-life. It is part in the reasons why this fan carries a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique in the market in comparison with all other fans? The Hunter Original could be the most unique ceiling fan on the market, which has a design that dates back on the turn in the 20th century. Cast iron is used in the motor housing construction to more efficiently draw heat away through the electrical windings; heat is often a major enemy of electrical motors. The extra weight in the cast-iron construction also cuts down on the risk of fan wobble. The motor can also be greater than some other ceiling fan, making it the best motor available. This allows the blades to become pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components in the motor, and prolongs the life in the motor. Added up, these unique design elements develop a powerful, quiet fan that is certainly backed by the limited lifetime warranty.
How do fans cool the room – do they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; no lower the room temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration on the skin. It could be the feeling you will get if you open your window in a moving car. If you use a ceiling fan in a room whose temperature is 80 degrees, running the fan can make a wind chill effect that makes you are feeling as though the temperature is 72 degrees. When used in conjunction by having an air conditioner, a ceiling fan can lower energy costs, because you can set the thermostat of one’s air conditioner with a higher temperature.
Can the ceiling fan be used during the cold months for any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by up to 15%. The temperature in the air in a heated room varies in layers; air close to the ceiling is warmer compared to air close to the floor, because warm air rises. A ceiling fan may help push the warmer air that is certainly trapped close to the ceiling back into the room, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it really is needed, and also the home heating does not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan ought to be run in a clockwise direction. This pushes air up against the ceilings and on the walls, to gently re-circulate the warm air without setting up a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run using broadband will consume less power than the usual 100-watt light bulb. How much can I be prepared to save in heating and even cooling costs? A ceiling fan can help to save up to 95% on cooling costs to get a new install and 47% with an existing air cooling system. It can also save up to 15% on heating costs. Savings vary depending on energy rates. How easy is often a ceiling fan to put in? Most people can get an electrical contractor to put in a ceiling fan, it can be a DIY project but please remember you will need to become able to: Locate a 2″ x 4″ and other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is roofed through the fan warranty – so how exactly does the Hunter warranty can rival other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for that stated life in the warranty; that is certainly, a 20-year warranty will cover the motor parts for 20 years. Labour for that motor is generally covered for 1-year, as are parts and labour for all other components in the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with 115 many years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans can be adjusted by having an accessory handheld remote control sold separately through the fan. In fact, remotes will surely boost the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight remotes can easily be installed either with all the fan during new installations or on fans which have been previously installed and in use for some time. The installation is a simple, do-it-yourself project and does not require any professional wiring. Remote control kits incorporate a handheld transmitter for sending commands on the fan as well as a receiver which either conceals within the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away through the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans can be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest on the ceiling which covers the electrical box) which has been built to accommodate sloped ceilings. Many quality fans will include this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included with all the fan at original purchase, accessory canopy adapters can be bought separately at shops. What length drop rod should I use with my fan? Will the fan be a little more vulnerable to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for that dimension in the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the risk of wobble. Think of a grandfather clock pendulum as well as slow, heavy swing versus a smaller clock pendulum which has a fast, unsteady swing. Weight and length combine to generate stability, reducing wobble, whether it really is in a ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that does not develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum since they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled through the same wall switch? The answer here depends upon how your wall switch is now wired. If you use a single wall switch with two wires (one black, one white), the solution is “no” until you get a control specifically made for this sort of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up in the single wall switch and get a more common, dual control that can operate a fan and light-weight separately from just one switch. Having an electrical contractor install a third wire can be expensive. What could be the difference in having a ceiling fan installed close on the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet higher than the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to position the fan at 8 feet (one foot should be allowed for that distance through the top in the fan motor on the switch housing bottom.