Old World Ceiling Fans – Hunter ceiling fans are unquestionably the top you can buy, here we have come up with all the information you might need to learn about ceiling fans before purchasing, please please remember there are many ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but you are nowhere close to good, the materials they normally use usually are not as high quality plus they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so while many ceiling fans may look “just as being a Hunter,” remember all ceiling fans usually are not created equal. Most Hunter ceiling fans have a very reverse option which is particularly important to lessen heating bills in the winter, warm air can be directed as a result of where it is needed by spinning the ceiling fan clockwise. Some points to take into account when purchasing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air can be a comfort to no one. One from the secrets of proper air movement is blade pitch. The greater the pitch-the angle from the blade-the more air movement providing the blade pitch continues to be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and use just right or powerful enough motors to compliment proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the load on undersized or under-powered motors. Many fans likewise use extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a lover consumes together with level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move little or no air, leading to very inefficient fans, Hunter fans are designed to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is usually the consequence of poor engineering design as well as a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, though these are generally a typical source of operating noise. A deficiency of proper dampening between metal parts may also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade mounting brackets can create varying levels of pitch (blade angle), throwing a lover into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get rid of balance, generating wobble through the very heart from the fan. Inexpensive mounting systems with pin fasteners may also give rise to wobble. Hunter fans have a very patented wobble free canopy this means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly attached to/off pull chains can be faulty and become brought out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to promote. Defective motor windings can lead to electrical shorts within the motor. Low quality fan bearings may be “shielded” on one side only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and brown spots begin to appear. You may even spot the brass for the fan can be a different colour compared to light kit you simply added! Quality brass as well as other metallic finishes add a number of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, avoid the fan. Can you’re feeling a smooth protective coating? That’s a sign from the kind of quality you can find within the famous Hunter Bright Brass Finish.
What will be the minimum height I need during my room to put up a lover? Safety standards declare that the min height through the floor to the bottom from the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make certain that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that sort of record to face on. So you receive the reassurance of knowing you have got the top-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the harder air that’s being moved. The air moved with the fan produces a wind chill effect that creates you’re feeling much more comfortable in a warm room. There can be a direct relationship between air movement and comfort – the harder air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag for the motor, scaling down the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are equipped for optimal air delivery. How do I know what size fan to acquire – there are numerous sizes available? You need to choose the right size fan for any room to acquire optimum looks, comfort as well as savings. If the fan is too small for that room, it won’t move enough air to make you’re feeling comfortable. If the fan is too big, it may move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do a little fans require oil among others don’t? The Hunter Original features a very unique motor which utilizes an oil-bath lubrication system. This system keeps the primary bearings lubricated at all times, for quiet operation and long-life. It is part from the good reason that this fan features a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique within the market in comparison to other fans? The Hunter Original will be the most unique ceiling fan for the market, using a design that dates back to the turn from the last century. Cast iron is utilized within the motor housing construction to more efficiently draw heat away through the electrical windings; heat can be a major enemy of electrical motors. The extra weight from the cast-iron construction also decreases the prospect of fan wobble. The motor can be larger than some other ceiling fan, which makes it the best motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components from the motor, and prolongs living from the motor. Added up, these unique design elements develop a powerful, quiet fan that’s backed with a limited lifetime warranty.
How do fans cool the bedroom – can they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; no lower the bedroom temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on the skin. It will be the feeling you will get whenever you open the window in a moving car. If you have a very ceiling fan in a room whose temperature is 80 degrees, running the fan can create a wind chill effect that creates you’re feeling like the temperature is 72 degrees. When employed in conjunction by having an ac, a ceiling fan can lower energy costs, since you can set the thermostat of one’s ac with a higher temperature.
Can the ceiling fan supply in the winter for just about any beneficial purpose? A ceiling fan might help lower energy consumption in the winter by approximately 15%. The temperature from the air in a heated room varies in layers; air near the ceiling is warmer compared to air near the floor, because warm air rises. A ceiling fan might help push the warmer air that’s trapped near the ceiling back off into the bedroom, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it is needed, and the heating system doesn’t overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan needs to be run in a clockwise direction. This pushes air up against the ceilings and down the walls, to gently re-circulate the warm air without creating a cooling wind chill effect.
How much electricity will a lover use? On average, a ceiling fan run on very fast will consume less power compared to a 100-watt light bulb. How much can I be prepared to save in heating or cooling costs? A ceiling fan can conserve approximately 95% on cooling costs for any new install and 47% with an existing air cooling system. It may also save approximately 15% on heating costs. Savings will vary based on energy rates. How easy can be a ceiling fan to install? Most people will get a mason to install a ceiling fan, it can be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ or another suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included with the fan warranty – how does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for that stated life from the warranty; that’s, a 20-year warranty covers the motor parts for 20 years. Labour for that motor is normally covered for 1-year, as well as parts and labour for other components from the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with more than 115 a lot of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans can be adjusted by having an accessory remote control sold separately through the fan. In fact, remotes can definitely enhance the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and light remotes can easily be installed either while using fan during new installations or on fans which has been previously installed along with use for a while. The installation is a straightforward, do-it-yourself project and doesn’t require any professional wiring. Remote control kits add a handheld transmitter for sending commands to the fan as well as a receiver which either conceals within the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away through the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans can be attached to angled or vaulted ceilings by using a lover canopy (the “cap” visible closest to the ceiling which provides coverage for the electrical box) which continues to be designed to accommodate sloped ceilings. Many quality fans will include this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included while using fan at original purchase, accessory canopy adapters are offered separately at retail outlets. What length drop rod should I use with my fan? Will the fan be vulnerable to wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot for that dimension from the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod to be able to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the prospect of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a smaller clock pendulum using a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it is in a ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated with a certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that doesn’t develop a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum simply because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled through the same wall switch? The answer here depends upon how your wall switch is now wired. If you have a very single wall switch with two wires (one black, one white), the solution is “no” unless you purchase a control specifically designed for this sort of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up within the single wall switch and purchase a more common, dual control that may operate a lover and light separately from a single switch. Having a mason use a third wire can be expensive. What will be the difference in having a ceiling fan installed close to the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet over the floor. Extension drop rods are used to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to put the fan at 8 feet (one foot has to be allowed for that distance through the top from the fan motor to the switch housing bottom.