Enigma Indoor Fans inside proportions 1460 X 2000One Blade Ceiling Fan – Hunter ceiling fans are without doubt the best you can get, here we have build every piece of information you need to understand ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers available who copy Hunter ceiling fan designs but they are nowhere near as good, the materials they’ll use aren’t as top quality and so they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just like a Hunter,” remember all ceiling fans aren’t built the same. Most Hunter ceiling fans have a very reverse option which can be particularly significant to reduce heating bills during the cold months, hot air could be directed right down to where it can be essental to spinning the ceiling fan clockwise. Some points to think about when buying a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to no-one. One with the secrets to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the harder mid-air movement supplying the blade pitch has been properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the load on undersized or under-powered motors. Many fans also employ extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes plus the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, they also move little or no air, resulting in very inefficient fans, Hunter fans are created to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the response to poor engineering design along with a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, although they’re a typical supply of operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that aren’t matched in carefully weighed and balanced sets may also wobble. Inconsistent blade mounting brackets can make varying degrees of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get free from balance, generating wobble in the very heart with the fan. Inexpensive mounting systems with pin fasteners may also contribute to wobble. Hunter fans have a very patented wobble free canopy which means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly placed on/off pull chains could become faulty and turn into brought out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to promote. Defective motor windings can lead to electrical shorts inside motor. Low quality fan bearings might be “shielded” on one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and liver spots start to appear. You may even spot the brass around the fan can be a different colour compared to the light kit you only added! Quality brass as well as other metallic finishes will include a group of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, avoid the fan. Can you are feeling an even protective coating? That’s a sign with the kind of quality you will discover inside famous Hunter Bright Brass Finish.
What may be the minimum height I need during my room to place up a follower? Safety standards suggest that the min height in the floor for the bottom with the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really ensure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that type of record to stand on. So you receive the peace of mind of knowing you’ve got the best-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, greater air which is being moved. The air moved from the fan creates a wind chill effect that makes you are feeling more comfortable in a very warm room. There can be a direct relationship between air movement and comfort – greater air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM with the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are equipped for optimal air delivery. How do I know what size fan to buy – there are many sizes available? You need to select the right size fan to get a room to obtain optimum looks, comfort as well as savings. If the fan is too small for that room, it doesn’t move enough air to make you are feeling comfortable. If the fan is too big, it may move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why carry out some fans require oil yet others do not? The Hunter Original includes a very unique motor that uses an oil-bath lubrication system. This system keeps the key bearings lubricated constantly, for quiet operation and long-life. It is part with the reason this fan includes a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside market in comparison to all the other fans? The Hunter Original may be the most unique ceiling fan around the market, which has a design that dates back for the turn with the twentieth century. Cast iron can be used inside motor housing construction to better draw heat away in the electrical windings; heat can be a major enemy of electrical motors. The extra weight with the cast-iron construction also decreases the potential for fan wobble. The motor can also be greater than any other ceiling fan, rendering it the best motor available. This allows the blades being pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components with the motor, and prolongs the life span with the motor. Added up, these unique design elements produce a powerful, quiet fan which is backed with a limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; no lower the room temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It may be the feeling you receive if you open the window in a very moving car. If you have a very ceiling fan in a very room whose temperature is 80 degrees, running the fan can make a wind chill effect that makes you are feeling like the temperature is 72 degrees. When utilized in conjunction with the air conditioning equipment, a ceiling fan can lower energy costs, because you can set the thermostat of one’s air conditioning equipment at a higher temperature.
Can the ceiling fan provide during the cold months for virtually any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by approximately 15%. The temperature with the air in a very heated room varies in layers; mid-air close to the ceiling is warmer compared to the air close to the floor, because hot air rises. A ceiling fan may help push the warmer air which is trapped close to the ceiling back off into the room, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it can be needed, along with the home heating won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan ought to be run in a very clockwise direction. This pushes mid-air up against the ceilings and along the walls, to softly re-circulate the hot air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run on high speed will consume less power compared to a 100-watt bulb. How much can I expect you’ll save in heating as well as cooling costs? A ceiling fan can help to conserve approximately 95% on cooling costs to get a new install and 47% with an existing air conditioning system. It may also save approximately 15% on heating costs. Savings will change determined by energy rates. How easy can be a ceiling fan to install? Most people are certain to get an electrical contractor to install a ceiling fan, it could be a DIY project but please remember you will need being able to: Locate a 2″ x 4″ or another suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is roofed from the fan warranty – how does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for that stated life with the warranty; which is, a 20-year warranty will handle the motor parts for 20 years. Labour for that motor is normally covered for 1-year, as are parts and labour for all the other components with the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company craigs list 115 numerous years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans could be adjusted with the accessory handheld remote control sold separately in the fan. In fact, remotes will surely improve the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible in the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight remotes can easily be installed either using the fan during new installations or on fans which were previously installed plus use for a while. The installation is a simple, do-it-yourself project and won’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands for the fan along with a receiver which either conceals within the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans could be placed on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which has been built to accommodate sloped ceilings. Many quality fans will include this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included using the fan at original purchase, accessory canopy adapters are offered separately at retail outlets. What length drop rod should I use with my fan? Will the fan be more susceptible to wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for that dimension with the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod in order to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the potential for wobble. Think of a grandfather clock pendulum as well as slow, heavy swing versus a smaller clock pendulum which has a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it can be in a very ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated with a certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that won’t produce a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum because they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled in the same wall switch? The answer here depends on how your wall switch is wired. If you have a very single wall switch with two wires (one black, one white), the solution is “no” until you purchase a control created for this sort of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up inside single wall switch and purchase a more common, dual control that can operate a follower and light-weight separately from one particular switch. Having an electrical contractor purchase a third wire could be expensive. What may be the difference in having a ceiling fan installed close for the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet over the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for that distance in the top with the fan motor for the switch housing bottom.
