Low Profile Linen Drum Shade Light Kit For Ceiling Fan St pertaining to sizing 1600 X 1199Ceiling Fan With Drum Shade Light Kit – Hunter ceiling fans are without doubt the top you can purchase, here we have put together all the information you need to know about ceiling fans before purchasing, please keep in mind there are other ceiling fan manufacturers around who copy Hunter ceiling fan designs however they are nowhere near as good, the materials they will use are not as excellent plus they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just as being a Hunter,” remember all ceiling fans are not created equal. Most Hunter ceiling fans use a reverse option that’s particularly important to reduce heating bills in winter, warm air can be directed as a result of where it’s needed by spinning the ceiling fan clockwise. Some points to take into consideration when choosing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is really a comfort to no-one. One of the keys to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the harder the environment movement supplying the blade pitch has been properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and use just right or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the worries on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes together with number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, they also move very little air, causing very inefficient fans, Hunter fans are built to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is usually the result of poor engineering design plus a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, despite the fact that these are generally a typical source of operating noise. A deficiency of proper dampening between metal parts can also create and intensify noise, as can the usage of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade wall mounts can create varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble through the very heart of the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans use a patented wobble free canopy this means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly placed on/off pull chains could become faulty and stay brought out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can cause electrical shorts inside motor. Low quality fan bearings may be “shielded” on one side only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and dark spots begin to appear. You may even spot the brass around the fan is really a different colour than the light kit you simply added! Quality brass as well as other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, prevent the fan. Can you feel a smooth protective coating? That’s a sign of the kind of quality you will find inside famous Hunter Bright Brass Finish.
What could be the minimum height I need in my room that will put up an admirer? Safety standards state that the min height through the floor towards the bottom of the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that type of record to stand on. So you get the peace of mind of knowing you have the top-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the more air that’s being moved. The air moved from the fan results in a wind chill effect that creates you feel more at ease in a very warm room. There is really a direct relationship between air movement and comfort – the more air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with many additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM of the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are prepared for optimal air delivery. How do I know what size fan to purchase – there are many sizes available? You need to choose the right size fan for any room to get optimum looks, comfort as well as savings. If the fan is too small to the room, it will not move enough air to make you feel comfortable. If the fan is too big, it could move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do some fans require oil yet others usually do not? The Hunter Original includes a very unique motor which uses an oil-bath lubrication system. This system keeps the main bearings lubricated constantly, for quiet operation and long-life. It is part of the reasons why this fan includes a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique inside market in comparison with all the other fans? The Hunter Original could be the most unique ceiling fan around the market, with a design that dates back towards the turn of the last century. Cast iron can be used inside motor housing construction to more effectively draw heat away through the electrical windings; heat is really a major enemy of electrical motors. The extra weight of the cast-iron construction also cuts down on the prospect of fan wobble. The motor is additionally greater than another ceiling fan, making it the strongest motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components of the motor, and prolongs living of the motor. Added up, these unique design elements develop a powerful, quiet fan that’s backed with a limited lifetime warranty.
How do fans cool the bedroom – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; no lower the bedroom temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you will get once you open your window in a very moving car. If you use a ceiling fan in a very room whose temperature is 80 degrees, running the fan can create a wind chill effect that creates you feel as though the temperature is 72 degrees. When found in conjunction with an air conditioning equipment, a ceiling fan can lower energy costs, since set the thermostat of one’s air conditioning equipment with a higher temperature.
Can the ceiling fan be used in winter for almost any beneficial purpose? A ceiling fan can help lower energy consumption in winter by as much as 15%. The temperature of the air in a very heated room varies in layers; the environment at the ceiling is warmer than the air at the floor, because warm air rises. A ceiling fan can help push the warmer air that’s trapped at the ceiling back off into the bedroom, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it’s needed, and also the furnace will not overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan ought to be run in a very clockwise direction. This pushes the environment facing the ceilings and on the walls, to gently re-circulate the warm air without developing a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan run on high speed will consume less power when compared to a 100-watt bulb. How much can I expect you’ll save in heating and even cooling costs? A ceiling fan can help to conserve as much as 95% on cooling costs for any new install and 47% on an existing air-con system. It can also save as much as 15% on heating costs. Savings vary determined by energy rates. How easy is really a ceiling fan to set up? Most people will get an electrician to set up a ceiling fan, it can be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ or any other suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is roofed from the fan warranty – how does the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties which cover the motor parts to the stated life of the warranty; that’s, a 20-year warranty covers the motor parts for 20 years. Labour to the motor is normally covered for 1-year, as are parts and labour for all the other components of the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans can be adjusted with an accessory remote control sold separately through the fan. In fact, remotes can definitely improve the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight remotes can easily be installed either with the fan during new installations or on fans that have been previously installed as well as in use for quite a while. The installation is an easy, do-it-yourself project and will not require any professional wiring. Remote control kits include a handheld transmitter for sending commands towards the fan plus a receiver which either conceals inside the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away through the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans can be placed on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest towards the ceiling which takes care of the electrical box) which has been built to accommodate sloped ceilings. Many quality fans should include this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with the fan at original purchase, accessory canopy adapters can be bought separately at shops. What length drop rod should I use with my fan? Will the fan be more vulnerable to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot to the dimension of the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod as a way to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the prospect of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a smaller clock pendulum with a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it’s in a very ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated with a certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that will not develop a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum given that they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan plus a light kit be controlled through the same wall switch? The answer here depends upon how your wall switch is now wired. If you use a single wall switch with two wires (one black, one white), the answer is “no” until you buy a control created specifically for this type of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up inside single wall switch and buy a more common, dual control that can operate an admirer and light-weight separately from one particular switch. Having an electrician use a third wire can be expensive. What could be the difference in having a ceiling fan installed close towards the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet across the floor. Extension drop rods are used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to put the fan at 8 feet (one foot have to be allowed to the distance through the top of the fan motor towards the switch housing bottom.
