Outdoor Hugger Ceiling Fans – Hunter ceiling fans are without a doubt the most effective you should buy, here we have put together all the information you will need to understand about ceiling fans before purchasing, please be aware that there are other ceiling fan manufacturers around who copy Hunter ceiling fan designs but they’re nowhere close to as good, the materials they’ll use are certainly not as high quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so while many ceiling fans may look “just like a Hunter,” remember all ceiling fans are certainly not made the same. Most Hunter ceiling fans have a very reverse option that’s particularly significant to cut back heating bills in the winter, warm air may be directed down to where it really is needed by spinning the ceiling fan clockwise. Some points to take into account when choosing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is a comfort to no one. One with the secrets of proper air movement is blade pitch. The greater the pitch-the angle with the blade-the greater air movement providing the blade pitch has become properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and don’t use sufficient or powerful enough motors to compliment proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the strain on undersized or under-powered motors. Many fans likewise use extra thin blades to cut back cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes as well as the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, they also move very little air, leading to very inefficient fans, Hunter fans are designed to shift a great deal of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is usually the results of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, although they’re a common method to obtain operating noise. A lack of proper dampening between metal parts can also create and intensify noise, as can the usage of extra thin sheet metal motor and mounting system parts. Hunter fans only use the most effective materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade supports can cause varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get rid of balance, generating wobble in the very heart with the fan. Inexpensive mounting systems with pin fasteners can also contribute to wobble. Hunter fans have a very patented wobble free canopy which means Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly attached to/off pull chains may become faulty and become got out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to showcase. Defective motor windings can bring about electrical shorts within the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and liver spots set out to appear. You may even notice the brass on the fan is a different colour compared to light kit you just added! Quality brass and other metallic finishes incorporate a group of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, avoid the fan. Can you are feeling an easy protective coating? That’s a sign with the kind of quality you will discover within the famous Hunter Bright Brass Finish.
What will be the minimum height I need within my room to put up a fan? Safety standards declare that the min height in the floor to the bottom with the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make sure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that type of record to square on. So you receive the reassurance of knowing you have got the most effective-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the greater air that is being moved. The air moved from the fan creates a wind chill effect which makes you are feeling convenient inside a warm room. There is a direct relationship between air movement and comfort – the greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with many additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag on the motor, scaling down the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, focus on optimal air delivery. How do I determine what size fan to get – there are many sizes available? You need to choose the right size fan for a room to acquire optimum looks, comfort and savings. If the fan is too small to the room, it will not move enough air to make you are feeling comfortable. If the fan is too big, it could move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why carry out some fans require oil and others tend not to? The Hunter Original carries a very unique motor that uses an oil-bath lubrication system. This system keeps the key bearings lubricated at all times, for quiet operation and long-life. It is part with the reasons why this fan carries a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique within the market when compared with other fans? The Hunter Original will be the most unique ceiling fan on the market, using a design that dates back to the turn with the last century. Cast iron can be used within the motor housing construction to more efficiently draw heat away in the electrical windings; heat is a major enemy of electrical motors. The extra weight with the cast-iron construction also cuts down on the possibility of fan wobble. The motor is additionally larger than any other ceiling fan, rendering it the most powerful motor available. This allows the blades to be pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components with the motor, and prolongs living with the motor. Added up, these unique design elements produce a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the bedroom – will they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; no lower the bedroom temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It will be the feeling you obtain once you open of the question inside a moving car. If you have a very ceiling fan inside a room whose temperature is 80 degrees, running the fan can cause a wind chill effect which makes you are feeling like the temperature is 72 degrees. When utilized in conjunction with an ac, a ceiling fan can lower energy costs, since set the thermostat of one’s ac at the higher temperature.
Can the ceiling fan supply in the winter for almost any beneficial purpose? A ceiling fan may help lower energy consumption in the winter by approximately 15%. The temperature with the air inside a heated room varies in layers; air at the ceiling is warmer compared to air at the floor, because warm air rises. A ceiling fan may help push the warmer air that is trapped at the ceiling back down into the bedroom, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it really is needed, and also the home heating doesn’t overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan should be run inside a clockwise direction. This pushes air up against the ceilings and along the walls, to softly re-circulate the warm air without developing a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan operate on high-speed will consume less power than the usual 100-watt bulb. How much can I expect to save in heating and or cooling costs? A ceiling fan can save approximately 95% on cooling costs for a new install and 47% by using an existing air conditioning system. It can also save approximately 15% on heating costs. Savings will vary depending on energy rates. How easy is a ceiling fan to setup? Most people will get a mason to setup a ceiling fan, it may be a DIY project but please bear in mind you will need to be able to: Locate a 2″ x 4″ or other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is roofed from the fan warranty – how can the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts to the stated life with the warranty; that is, a 20-year warranty will take care of the motor parts for 20 years. Labour to the motor is generally covered for 1-year, much like parts and labour for other components with the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company craigs list 115 numerous years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans may be adjusted with an accessory remote device sold separately in the fan. In fact, remote controls really can increase the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible in the comfort of one’s favourite chair or bedside table. Ceiling fan and light remote controls can easily be installed either with all the fan during new installations or on fans which have been previously installed plus use for a while. The installation is a straightforward, do-it-yourself project and doesn’t require any professional wiring. Remote control kits incorporate a handheld transmitter for sending commands to the fan as well as a receiver which either conceals inside fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans may be attached to angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which takes care of the electrical box) which has become meant to accommodate sloped ceilings. Many quality fans will include such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included with all the fan at original purchase, accessory canopy adapters are sold separately at retail outlets. What length drop rod should I use with my fan? Will the fan be a little more prone to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot to the dimension with the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod to be able to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the possibility of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a lesser clock pendulum using a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it really is inside a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that doesn’t produce a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum since they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled in the same wall switch? The answer here depends upon how your wall switch is wired. If you have a very single wall switch with two wires (one black, one white), the reply is “no” unless you buy a control specifically made for such a switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up within the single wall switch and buy a more common, dual control that can operate a fan and light separately from just one switch. Having a mason install a third wire may be expensive. What will be the difference in having a ceiling fan installed close to the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to rate the fan at 8 feet (one foot should be allowed to the distance in the top with the fan motor to the switch housing bottom.