Heads Up Haiku Hunters Homekit Ceiling Fan Is Here Cnet pertaining to size 1600 X 900Homekit Ceiling Fan Control – Hunter ceiling fans are without a doubt the most effective you can buy, here we have come up with everything you need to learn about ceiling fans before purchasing, please be aware that there are many ceiling fan manufacturers around who copy Hunter ceiling fan designs but they are nowhere close to good, materials they will use are certainly not as top quality plus they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so although ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not made the same. Most Hunter ceiling fans have a reverse option that is particularly significant to cut back heating bills in the winter months, hot air might be directed down to where it’s required by spinning the ceiling fan clockwise. Some points to consider when purchasing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is a comfort to no person. One of the keys to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the higher mid-air movement supplying the blade pitch has been properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and use just right or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the strain on undersized or under-powered motors. Many fans also use extra thin blades to cut back cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, they also move hardly any air, resulting in very inefficient fans, Hunter fans are designed to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is truly the response to poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, though they are perhaps the most common method to obtain operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans only use the most effective materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade mounting brackets can cause varying degrees of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get free from balance, generating wobble from the very heart of the fan. Inexpensive mounting systems with pin fasteners may also help with wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly attached to/off pull chains can be faulty and stay pulled out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to market. Defective motor windings can result in electrical shorts inside motor. Low quality fan bearings could possibly be “shielded” on one hand only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and brown spots begin to appear. You may even see the brass on the fan is a different colour compared to the light kit you just added! Quality brass as well as other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, stay away from the fan. Can you’re feeling a smooth protective coating? That’s a sign of the kind of quality you can find inside famous Hunter Bright Brass Finish.
What could be the minimum height I need during my room that will put up a follower? Safety standards state that the min height from the floor on the bottom of the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really be sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that type of record to face on. So you get the comfort of knowing you have the most effective-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the greater air that is being moved. The air moved with the fan produces a wind chill effect that creates you’re feeling much more comfortable in the warm room. There is a direct relationship between air movement and comfort – the greater air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with many additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag on the motor, reducing the RPM of the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are designed for optimal air delivery. How do I understand what size fan to buy – there are many sizes available? You need to choose the best size fan for any room to have optimum looks, comfort as well as savings. If the fan is too small for your room, it will not move enough air to make you’re feeling comfortable. If the fan is too big, it could move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do a little fans require oil among others tend not to? The Hunter Original includes a very unique motor which utilizes an oil-bath lubrication system. This system keeps the key bearings lubricated always, for quiet operation and long-life. It is part of the good reason that this fan includes a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique inside market compared to all the other fans? The Hunter Original could be the most unique ceiling fan on the market, having a design that goes back on the turn of the twentieth century. Cast iron can be used inside motor housing construction to more efficiently draw heat away from the electrical windings; heat is a major enemy of electrical motors. The extra weight of the cast-iron construction also reduces the risk of fan wobble. The motor is also bigger than every other ceiling fan, which makes it the best motor available. This allows the blades being pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components of the motor, and prolongs living of the motor. Added up, these unique design elements develop a powerful, quiet fan that is backed by a limited lifetime warranty.
How do fans cool the bedroom – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it does not lower the bedroom temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration onto the skin. It could be the feeling you get when you open the window in the moving car. If you have a ceiling fan in the room whose temperature is 80 degrees, running the fan can cause a wind chill effect that creates you’re feeling as if the temperature is 72 degrees. When employed in conjunction with the air conditioning equipment, a ceiling fan can lower energy costs, since set the thermostat of one’s air conditioning equipment at the higher temperature.
Can the ceiling fan be utilized in the winter months for almost any beneficial purpose? A ceiling fan can help lower energy consumption in the winter months by up to 15%. The temperature of the air in the heated room varies in layers; mid-air nearby the ceiling is warmer compared to the air nearby the floor, because hot air rises. A ceiling fan can help push the warmer air that is trapped nearby the ceiling back off into the bedroom, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it’s needed, and also the heating system does not overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan needs to be run in the clockwise direction. This pushes mid-air up against the ceilings and around the walls, to carefully re-circulate the hot air without developing a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run using high-speed will consume less power when compared to a 100-watt light bulb. How much can I anticipate to save in heating as well as cooling costs? A ceiling fan can save up to 95% on cooling costs for any new install and 47% on an existing ac system. It may also save up to 15% on heating costs. Savings vary depending on energy rates. How easy is a ceiling fan to put in? Most people will get an electrician to put in a ceiling fan, it might be a DIY project but please keep in mind you will need being able to: Locate a 2″ x 4″ and other suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is covered with the fan warranty – how can the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for your stated life of the warranty; that is, a 20-year warranty will take care of the motor parts for 20 years. Labour for your motor is normally covered for 1-year, much like parts and labour for all the other components of the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with 115 years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans might be adjusted with the accessory remote device sold separately from the fan. In fact, remotes really can improve the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible from the comfort of one’s favourite chair or bedside table. Ceiling fan and light remotes can easily be installed either using the fan during new installations or on fans which has been previously installed plus use for a long time. The installation is an easy, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands on the fan and a receiver which either conceals in the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away from the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans might be attached to angled or vaulted ceilings by using a follower canopy (the “cap” visible closest on the ceiling which takes care of the electrical box) which has been made to accommodate sloped ceilings. Many quality fans includes this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included using the fan at original purchase, accessory canopy adapters can be bought separately at shops. What length drop rod should I use with my fan? Will the fan be a little more at risk of wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for your dimension of the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod to be able to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the risk of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a lesser clock pendulum having a fast, unsteady swing. Weight and length combine to generate stability, reducing wobble, whether it’s in the ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that does not develop a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum because they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled from the same wall switch? The answer here depends on how your wall switch is currently wired. If you have a single wall switch with two wires (one black, one white), the answer then is “no” until you purchase a control created for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside single wall switch and purchase a more common, dual control which will operate a follower and light separately from just one switch. Having an electrician put in a third wire might be expensive. What could be the difference in having a ceiling fan installed close on the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet across the floor. Extension drop rods are employed to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to position the fan at 8 feet (one foot should be allowed for your distance from the top of the fan motor on the switch housing bottom.
