Ceiling Fans Direct – Hunter ceiling fans are unquestionably the best you should buy, here we have put together all the information you might need to understand ceiling fans before purchasing, please please remember there are additional ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but they’re nowhere close to as good, the type of material they’ll use are certainly not as high quality plus they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so although ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not built the same. Most Hunter ceiling fans have a very reverse option which can be particularly important to cut back heating bills during the cold months, heated air might be directed into where it is needed by spinning the ceiling fan clockwise. Some points to think about when buying a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is really a comfort to no one. One with the recommendations for proper air movement is blade pitch. The greater the pitch-the angle with the blade-the harder air movement supplying the blade pitch has become properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and use big enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the strain on undersized or under-powered motors. Many fans also have extra thin blades to cut back cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes as well as the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, in addition they move very little air, causing very inefficient fans, Hunter fans are created to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is usually the consequence of poor engineering design as well as a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, although these are generally a common method to obtain operating noise. A deficiency of proper dampening between metal parts also can create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets also can wobble. Inconsistent blade mounting brackets can make varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get free from balance, generating wobble from the very heart with the fan. Inexpensive mounting systems with pin fasteners also can bring about wobble. Hunter fans have a very patented wobble free canopy this means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly attached to/off pull chains can be faulty and be brought out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can result in electrical shorts inside motor. Low quality fan bearings could possibly be “shielded” on the one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and brown spots set out to appear. You may even spot the brass for the fan is really a different colour compared to light kit you just added! Quality brass along with other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, prevent the fan. Can you feel an easy protective coating? That’s a sign with the kind of quality you will discover inside famous Hunter Bright Brass Finish.
What may be the minimum height I need within my room to place up a fan? Safety standards declare that the min height from the floor to the bottom with the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that type of record to square on. So you obtain the satisfaction of knowing you have the best-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, greater air that’s being moved. The air moved through the fan produces a wind chill effect that creates you feel more at ease in the warm room. There is really a direct relationship between air movement and comfort – greater air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with many additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag for the motor, reducing the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, are designed for optimal air delivery. How do I understand what size fan to acquire – there are many sizes available? You need to pick the best size fan for any room to acquire optimum looks, comfort as well as savings. If the fan is simply too small for that room, it won’t move enough air to make you feel comfortable. If the fan is simply too big, it could move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why do a little fans require oil among others usually do not? The Hunter Original features a very unique motor that uses an oil-bath lubrication system. This system keeps the main bearings lubricated at all times, for quiet operation and long-life. It is part with the reason why this fan features a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique inside market in comparison with all the fans? The Hunter Original may be the most unique ceiling fan for the market, having a design that goes back to the turn with the twentieth century. Cast iron is employed inside motor housing construction to more efficiently draw heat away from the electrical windings; heat is really a major enemy of electrical motors. The extra weight with the cast-iron construction also decreases the potential for fan wobble. The motor is additionally greater than some other ceiling fan, rendering it the strongest motor available. This allows the blades to become pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components with the motor, and prolongs the life with the motor. Added up, these unique design elements create a powerful, quiet fan that’s backed by way of a limited lifetime warranty.
How do fans cool the area – can they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it doesn’t lower the area temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on the skin. It may be the feeling you obtain when you open of the question in the moving car. If you have a very ceiling fan in the room whose temperature is 80 degrees, running the fan can make a wind chill effect that creates you feel like the temperature is 72 degrees. When used in conjunction with an air conditioning unit, a ceiling fan can lower energy costs, since set the thermostat of your air conditioning unit at a higher temperature.
Can the ceiling fan be used during the cold months for almost any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by around 15%. The temperature with the air in the heated room varies in layers; air near the ceiling is warmer compared to air near the floor, because heated air rises. A ceiling fan may help push the warmer air that’s trapped near the ceiling back down into the area, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it is needed, as well as the furnace will not overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan ought to be run in the clockwise direction. This pushes air up against the ceilings and around the walls, to carefully re-circulate the heated air without setting up a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan operate on high speed will consume less power compared to a 100-watt light bulb. How much can I anticipate to save in heating or cooling costs? A ceiling fan can conserve around 95% on cooling costs for any new install and 47% while on an existing air-con system. It also can save around 15% on heating costs. Savings will vary based on energy rates. How easy is really a ceiling fan to setup? Most people is certain to get a mason to setup a ceiling fan, it might be a DIY project but please take into account you will need to become able to: Locate a 2″ x 4″ or other suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is roofed through the fan warranty – so how exactly does the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for that stated life with the warranty; that’s, a 20-year warranty will cover the motor parts for 20 years. Labour for that motor is usually covered for 1-year, as well as parts and labour for all the components with the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans might be adjusted with an accessory handy remote control sold separately from the fan. In fact, remotes really can enhance the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible from the comfort of your favourite chair or bedside table. Ceiling fan and lightweight remotes can easily be installed either with all the fan during new installations or on fans which has been previously installed as well as in use for quite a while. The installation is a straightforward, do-it-yourself project and will not require any professional wiring. Remote control kits include a handheld transmitter for sending commands to the fan as well as a receiver which either conceals inside the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away from the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans might be attached to angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which covers the electrical box) which has become built to accommodate sloped ceilings. Many quality fans will include this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included with all the fan at original purchase, accessory canopy adapters are sold separately at retail outlets. What length drop rod should I use with my fan? Will the fan be more prone to wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot for that dimension with the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod so that you can properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the potential for wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a reduced clock pendulum having a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it is in the ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by way of a certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that will not create a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum simply because they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled from the same wall switch? The answer here depends upon how your wall switch is wired. If you have a very single wall switch with two wires (one black, one white), the answer is “no” if you do not obtain a control specifically made for this type of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up inside single wall switch and obtain a more common, dual control that can operate a fan and lightweight separately from one particular switch. Having a mason purchase a third wire might be expensive. What may be the difference in having a ceiling fan installed close to the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet across the floor. Extension drop rods are used to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to position the fan at 8 feet (one foot must be allowed for that distance from the top with the fan motor to the switch housing bottom.