Casablanca Ceiling Fan – Hunter ceiling fans are unquestionably the best you should buy, ideas have put together everything you might need to know about ceiling fans before purchasing, please please remember there are more ceiling fan manufacturers on the market who copy Hunter ceiling fan designs however they are nowhere near as good, the materials they normally use are not as top quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although ceiling fans may look “just just like a Hunter,” remember all ceiling fans are not good quality. Most Hunter ceiling fans use a reverse option that is especially important to lessen heating bills during the cold months, heated air could be directed as a result of where it’s essental to spinning the ceiling fan clockwise. Some points to think about when choosing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is often a comfort to no one. One from the secrets of proper air movement is blade pitch. The greater the pitch-the angle from the blade-the higher air movement providing the blade pitch continues to be properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and do not use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the worries on undersized or under-powered motors. Many fans also employ extra thin blades to lessen cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes together with level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, but they also move very little air, producing very inefficient fans, Hunter fans are created to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is usually the response to poor engineering design and a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, although these are generally perhaps the most common method to obtain operating noise. A lack of proper dampening between metal parts may also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade supports can cause varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get rid of balance, generating wobble in the very heart from the fan. Inexpensive mounting systems with pin fasteners may also bring about wobble. Hunter fans use a patented wobble free canopy this means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly set up on/off pull chains can be faulty and stay brought out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to showcase. Defective motor windings can cause electrical shorts in the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and liver spots set out to appear. You may even spot the brass around the fan is often a different colour as opposed to light kit you only added! Quality brass along with other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, stay away from the fan. Can you feel an easy protective coating? That’s a sign from the kind of quality you’ll find in the famous Hunter Bright Brass Finish.
What could be the minimum height I need within my room to place up a fan? Safety standards claim that the min height in the floor towards the bottom from the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really be sure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that kind of record to face on. So you obtain the comfort of knowing you have the best-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the harder air that is being moved. The air moved with the fan produces a wind chill effect that produces you feel convenient inside a warm room. There is often a direct relationship between air movement and comfort – the harder air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM from the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are designed for optimal air delivery. How do I determine what size fan to get – there are many sizes available? You need to choose the right size fan for any room to get optimum looks, comfort as well as savings. If the fan is too small to the room, it will not move enough air to make you feel comfortable. If the fan is too big, it might move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do some fans require oil among others don’t? The Hunter Original carries a very unique motor which utilizes an oil-bath lubrication system. This system keeps the primary bearings lubricated all the time, for quiet operation and long-life. It is part from the reasons why this fan carries a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique in the market compared to all the other fans? The Hunter Original could be the most unique ceiling fan around the market, with a design that extends back towards the turn from the 20th century. Cast iron is used in the motor housing construction to more effectively draw heat away in the electrical windings; heat is often a major enemy of electrical motors. The extra weight from the cast-iron construction also cuts down on the potential for fan wobble. The motor can be bigger than any other ceiling fan, making it the most powerful motor available. This allows the blades to be pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components from the motor, and prolongs the life from the motor. Added up, these unique design elements make a powerful, quiet fan that is backed by a limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by making a wind chill effect; this doesn’t lower the room temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you get if you open of the question inside a moving car. If you use a ceiling fan inside a room whose temperature is 80 degrees, running the fan can cause a wind chill effect that produces you feel as if the temperature is 72 degrees. When utilized in conjunction by having an air conditioning equipment, a ceiling fan can lower energy costs, since you can set the thermostat of your air conditioning equipment with a higher temperature.
Can the ceiling fan be utilized during the cold months for almost any beneficial purpose? A ceiling fan can help lower energy consumption during the cold months by approximately 15%. The temperature from the air inside a heated room varies in layers; air near the ceiling is warmer as opposed to air near the floor, because heated air rises. A ceiling fan can help push the warmer air that is trapped near the ceiling down again into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it’s needed, and the heat doesn’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan should be run inside a clockwise direction. This pushes air against the ceilings and along the walls, to softly re-circulate the heated air without making a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on very fast will consume less power than a 100-watt light bulb. How much can I be prepared to save in heating and even cooling costs? A ceiling fan can save approximately 95% on cooling costs for any new install and 47% while on an existing air cooling system. It may also save approximately 15% on heating costs. Savings will vary depending on energy rates. How easy is often a ceiling fan to set up? Most people will get an electrician to set up a ceiling fan, it could be a DIY project but please remember you will need to be able to: Locate a 2″ x 4″ or any other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is covered with the fan warranty – how can the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts to the stated life from the warranty; that is, a 20-year warranty will take care of the motor parts for 20 years. Labour to the motor is generally covered for 1-year, as are parts and labour for all the other components from the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 many years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans could be adjusted by having an accessory handy remote control sold separately in the fan. In fact, controllers really can improve the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible in the comfort of your favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with the fan during new installations or on fans which have been previously installed plus use for a while. The installation is an easy, do-it-yourself project and doesn’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands towards the fan and a receiver which either conceals in the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans could be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest towards the ceiling which takes care of the electrical box) which continues to be made to accommodate sloped ceilings. Many quality fans will incorporate such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included with the fan at original purchase, accessory canopy adapters can be bought separately at stores. What length drop rod should I use with my fan? Will the fan be a little more at risk of wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot to the dimension from the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the potential for wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a lesser clock pendulum with a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it’s inside a ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that doesn’t make a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum simply because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled in the same wall switch? The answer here is determined by how your wall switch is currently wired. If you use a single wall switch with two wires (one black, one white), the solution is “no” if you don’t obtain a control created for such a switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up in the single wall switch and obtain a more common, dual control that will operate a fan and light-weight separately from one particular switch. Having an electrician use a third wire could be expensive. What could be the difference in having a ceiling fan installed close towards the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are widely-used to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to rate the fan at 8 feet (one foot have to be allowed to the distance in the top from the fan motor towards the switch housing bottom.