Ceiling Fan Chain – Hunter ceiling fans are without doubt the top you can purchase, here we have come up with every piece of information you will need to understand ceiling fans before purchasing, please please remember there are more ceiling fan manufacturers on the market who copy Hunter ceiling fan designs however they are nowhere close to as good, materials they’ll use usually are not as high quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although ceiling fans may look “just being a Hunter,” remember all ceiling fans usually are not made the same. Most Hunter ceiling fans have a reverse option which can be especially important to lessen heating bills during the cold months, warm air might be directed into where it’s required spinning the ceiling fan clockwise. Some points to think about when purchasing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is often a comfort to no one. One in the secrets to proper air movement is blade pitch. The greater the pitch-the angle in the blade-the harder the environment movement providing the blade pitch may be properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and do not use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the worries on undersized or under-powered motors. Many fans also have extra thin blades to lessen cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a lover consumes in addition to the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move hardly any air, leading to very inefficient fans, Hunter fans are created to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is usually the result of poor engineering design plus a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, though they’re a common source of operating noise. A lack of proper dampening between metal parts may also create and intensify noise, as can the usage of extra thin sheet metal motor and mounting system parts. Hunter fans only use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can produce varying examples of pitch (blade angle), throwing a lover into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get out of balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners may also help with wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains could become faulty and be removed in the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can result in electrical shorts inside the motor. Low quality fan bearings could possibly be “shielded” on one side only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and brown spots set out to appear. You may even notice the brass around the fan is often a different colour than the light kit you only added! Quality brass and other metallic finishes incorporate a group of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, prevent the fan. Can you feel an even protective coating? That’s a sign in the kind of quality you will find inside the famous Hunter Bright Brass Finish.
What is the minimum height I need inside my room to place up a lover? Safety standards state that the min height through the floor for the bottom in the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that sort of record to stand on. So you obtain the peace of mind of knowing you’ve got the top-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the more air that is being moved. The air moved with the fan creates a wind chill effect that makes you feel convenient in a warm room. There is often a direct relationship between air movement and comfort – the more air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM in the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, are prepared for optimal air delivery. How do I know very well what size fan to get – there are many sizes available? You need to choose the right size fan for the room to get optimum looks, comfort and savings. If the fan is too small to the room, it will not move enough air to make you feel comfortable. If the fan is too big, it may move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why carry out some fans require oil and others tend not to? The Hunter Original carries a very unique motor that uses an oil-bath lubrication system. This system keeps the key bearings lubricated always, for quiet operation and long-life. It is part in the reason this fan carries a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique inside the market in comparison to all the fans? The Hunter Original is the most unique ceiling fan around the market, using a design that goes for the turn in the 20th century. Cast iron can be used inside the motor housing construction to more effectively draw heat away through the electrical windings; heat is often a major enemy of electrical motors. The extra weight in the cast-iron construction also decreases the prospect of fan wobble. The motor can also be larger than any other ceiling fan, so that it is the best motor available. This allows the blades to be pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components in the motor, and prolongs living in the motor. Added up, these unique design elements develop a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the bedroom – will they actually lower the temperature? A ceiling fan cools by making a wind chill effect; it doesn’t lower the bedroom temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on your skin. It is the feeling you obtain when you open of the question in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can produce a wind chill effect that makes you feel just as if the temperature is 72 degrees. When employed in conjunction having an ac, a ceiling fan can lower energy costs, since you can set the thermostat of one’s ac with a higher temperature.
Can the ceiling fan be used during the cold months for almost any beneficial purpose? A ceiling fan can help lower energy consumption during the cold months by as much as 15%. The temperature in the air in a heated room varies in layers; the environment close to the ceiling is warmer than the air close to the floor, because warm air rises. A ceiling fan can help push the warmer air that is trapped close to the ceiling back into the bedroom, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it’s needed, along with the heat won’t overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan must be run in a clockwise direction. This pushes the environment up against the ceilings and around the walls, to carefully re-circulate the warm air without making a cooling wind chill effect.
How much electricity will a lover use? On average, a ceiling fan run on broadband will consume less power than the usual 100-watt light bulb. How much can I expect to save in heating or cooling costs? A ceiling fan can conserve as much as 95% on cooling costs for the new install and 47% by using an existing air-con system. It may also save as much as 15% on heating costs. Savings will change based on energy rates. How easy is often a ceiling fan to install? Most people are certain to get an electrical contractor to install a ceiling fan, it might be a DIY project but please bear in mind you will need to be able to: Locate a 2″ x 4″ or any other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is roofed with the fan warranty – what makes the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts to the stated life in the warranty; that is, a 20-year warranty will cover the motor parts for 20 years. Labour to the motor is normally covered for 1-year, just like parts and labour for all the components in the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company with 115 many years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans might be adjusted having an accessory handheld remote control sold separately through the fan. In fact, controllers can really improve the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either using the fan during new installations or on fans which have been previously installed along with use for a long time. The installation is a simple, do-it-yourself project and won’t require any professional wiring. Remote control kits incorporate a handheld transmitter for sending commands for the fan plus a receiver which either conceals in the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away through the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans might be set up on angled or vaulted ceilings by using a lover canopy (the “cap” visible closest for the ceiling which covers the electrical box) which may be designed to accommodate sloped ceilings. Many quality fans should include such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included using the fan at original purchase, accessory canopy adapters can be bought separately at retail outlets. What length drop rod should I use with my fan? Will the fan become more vulnerable to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot to the dimension in the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a reduced clock pendulum using a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it’s in a ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by the certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that won’t develop a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum simply because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled through the same wall switch? The answer here depends upon how your wall switch is currently wired. If you have a single wall switch with two wires (one black, one white), the answer is “no” if you don’t get a control created for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and get a more common, dual control that can operate a lover and light-weight separately from just one switch. Having an electrical contractor use a third wire might be expensive. What is the difference in having a ceiling fan installed close for the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet over the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to rate the fan at 8 feet (one foot should be allowed to the distance through the top in the fan motor for the switch housing bottom.