Hunter Ceiling Fan Remote Control Troubleshooting – Hunter ceiling fans are without a doubt the top you can buy, ideas have assembled everything you need to understand about ceiling fans before purchasing, please bear in mind that there are many ceiling fan manufacturers out there who copy Hunter ceiling fan designs but they are nowhere close to good, the types of materials they use usually are not as good quality and so they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so while many ceiling fans may look “just being a Hunter,” remember all ceiling fans usually are not made the same. Most Hunter ceiling fans have a very reverse option that is especially important to lessen heating bills in the winter, heated air might be directed right down to where it is essental to spinning the ceiling fan clockwise. Some points to think about when choosing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is a comfort to nobody. One in the secrets of proper air movement is blade pitch. The greater the pitch-the angle in the blade-the harder the air movement supplying the blade pitch continues to be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and don’t use sufficient or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the stress on undersized or under-powered motors. Many fans also use extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a lover consumes in addition to the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move little or no air, resulting in very inefficient fans, Hunter fans are built to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the results of poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, despite the fact that they’re perhaps the most common way to obtain operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans just use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can cause varying levels of pitch (blade angle), throwing a lover into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get rid of balance, generating wobble in the very heart in the fan. Inexpensive mounting systems with pin fasteners may also help with wobble. Hunter fans have a very patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains could become faulty and be pulled out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to showcase. Defective motor windings can bring about electrical shorts within the motor. Low quality fan bearings could possibly be “shielded” on one hand only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots begin to appear. You may even notice the brass about the fan is a different colour as opposed to light kit you just added! Quality brass as well as other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, stay away from the fan. Can you feel an even protective coating? That’s a sign in the kind of quality you will find within the famous Hunter Bright Brass Finish.
What is the minimum height I need in my room to set up a lover? Safety standards claim that the min height in the floor to the bottom in the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that kind of record to stand on. So you get the peace of mind of knowing you’ve got the top-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the harder air that is certainly being moved. The air moved from the fan generates a wind chill effect that creates you feel more at ease in a very warm room. There is a direct relationship between air movement and comfort – the harder air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with some additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag about the motor, slowing down the RPM in the blades, which decreases the CFM. All Hunter fans, whether four to five blades, focus on optimal air delivery. How do I know very well what size fan to acquire – there are numerous sizes available? You need to choose the best size fan to get a room to acquire optimum looks, comfort as well as savings. If the fan is way too small for the room, it does not move enough air to make you feel comfortable. If the fan is way too big, it could possibly move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why do a little fans require oil yet others don’t? The Hunter Original features a very unique motor that uses an oil-bath lubrication system. This system keeps the main bearings lubricated all the time, for quiet operation and long-life. It is part in the reason why this fan features a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique within the market in comparison to other fans? The Hunter Original is the most unique ceiling fan about the market, which has a design that extends back to the turn in the 20th century. Cast iron can be used within the motor housing construction to more effectively draw heat away in the electrical windings; heat is a major enemy of electrical motors. The extra weight in the cast-iron construction also cuts down on possibility of fan wobble. The motor can be bigger than any other ceiling fan, which makes it the strongest motor available. This allows the blades to become pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components in the motor, and prolongs the life span in the motor. Added up, these unique design elements develop a powerful, quiet fan that is certainly backed by way of a limited lifetime warranty.
How do fans cool the room – can they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; it does not lower the room temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration onto the skin. It is the feeling you receive whenever you open the window in a very moving car. If you have a very ceiling fan in a very room whose temperature is 80 degrees, running the fan can cause a wind chill effect that creates you feel like the temperature is 72 degrees. When utilized in conjunction having an air conditioning equipment, a ceiling fan can lower energy costs, because you can set the thermostat of your respective air conditioning equipment at a higher temperature.
Can the ceiling fan be utilized in the winter for just about any beneficial purpose? A ceiling fan might help lower energy consumption in the winter by approximately 15%. The temperature in the air in a very heated room varies in layers; the air near the ceiling is warmer as opposed to air near the floor, because heated air rises. A ceiling fan might help push the warmer air that is certainly trapped near the ceiling back off into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it is needed, and also the furnace won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan needs to be run in a very clockwise direction. This pushes the air facing the ceilings and on the walls, to softly re-circulate the heated air without creating a cooling wind chill effect.
How much electricity will a lover use? On average, a ceiling fan are powered by broadband will consume less power when compared to a 100-watt lamp. How much can I expect you’ll save in heating or cooling costs? A ceiling fan can help to save approximately 95% on cooling costs to get a new install and 47% by using an existing air cooling system. It may also save approximately 15% on heating costs. Savings will vary depending on energy rates. How easy is a ceiling fan to install? Most people will get a mason to install a ceiling fan, it might be a DIY project but please keep in mind you will need to become able to: Locate a 2″ x 4″ and other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is included from the fan warranty – how can the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for the stated life in the warranty; that is certainly, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is mostly covered for 1-year, as are parts and labour for other components in the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company craigs list 115 years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans might be adjusted having an accessory handy remote control sold separately in the fan. In fact, remotes really can boost the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible in the comfort of your respective favourite chair or bedside table. Ceiling fan and light remotes can easily be installed either while using fan during new installations or on fans which were previously installed and in use for a long time. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands to the fan and a receiver which either conceals within the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans might be set up on angled or vaulted ceilings by using a lover canopy (the “cap” visible closest to the ceiling which provides coverage for the electrical box) which continues to be meant to accommodate sloped ceilings. Many quality fans will incorporate this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included while using fan at original purchase, accessory canopy adapters can be purchased separately at stores. What length drop rod should I use with my fan? Will the fan be at risk of wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot for the dimension in the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod so that you can properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the possibility of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a lesser clock pendulum which has a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it is in a very ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by way of a certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that won’t develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum because they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled in the same wall switch? The answer here is determined by how your wall switch is now wired. If you have a very single wall switch with two wires (one black, one white), the answer is “no” if you do not obtain a control created specifically for this sort of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up within the single wall switch and obtain a more common, dual control that will operate a lover and light separately from a single switch. Having a mason install a third wire might be expensive. What is the difference in having a ceiling fan installed close to the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed for the distance in the top in the fan motor to the switch housing bottom.