Ceiling Fan With Crystal Light Kit – Hunter ceiling fans are undoubtedly the very best you should buy, have a look at have put together all the details you might need to learn about ceiling fans before purchasing, please bear in mind that there are other ceiling fan manufacturers available who copy Hunter ceiling fan designs but they’re nowhere near as good, the materials they use aren’t as high quality plus they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so although many ceiling fans may look “just being a Hunter,” remember all ceiling fans aren’t made the same. Most Hunter ceiling fans have a reverse option which is particularly significant to lessen heating bills in the winter, heated air may be directed right down to where it can be required spinning the ceiling fan clockwise. Some points to consider when choosing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air can be a comfort to no-one. One of the keys to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the harder the environment movement providing the blade pitch has been properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials , nor use big enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the strain on undersized or under-powered motors. Many fans also have extra thin blades to lessen cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes together with amount of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, but they also move very little air, causing very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is often the results of poor engineering design plus a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, even though they’re perhaps the most common method to obtain operating noise. A lack of proper dampening between metal parts also can create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that aren’t matched in carefully weighed and balanced sets also can wobble. Inconsistent blade mounting brackets can create varying levels of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble from the very heart of the fan. Inexpensive mounting systems with pin fasteners also can contribute to wobble. Hunter fans have a patented wobble free canopy meaning Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly attached to/off pull chains could become faulty and turn into pulled out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to showcase. Defective motor windings can lead to electrical shorts within the motor. Low quality fan bearings might be “shielded” on one side only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and brown spots begin to appear. You may even see the brass about the fan can be a different colour than the light kit you only added! Quality brass as well as other metallic finishes will include a compilation of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, stay away from the fan. Can you’re feeling a smooth protective coating? That’s a sign of the kind of quality you’ll find within the famous Hunter Bright Brass Finish.
What will be the minimum height I need within my room to place up a follower? Safety standards claim that the min height from the floor towards the bottom of the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really be sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that sort of record to face on. So you have the peace of mind of knowing you may have the very best-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the more air that’s being moved. The air moved through the fan creates a wind chill effect which makes you’re feeling more at ease in a warm room. There can be a direct relationship between air movement and comfort – the more air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with some additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag about the motor, reducing the RPM of the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, are designed for optimal air delivery. How do I understand what size fan to purchase – there are numerous sizes available? You need to pick the best size fan for a room to obtain optimum looks, comfort and energy savings. If the fan is way too small for your room, it won’t move enough air to make you’re feeling comfortable. If the fan is way too big, it might move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why carry out some fans require oil and others tend not to? The Hunter Original features a very unique motor which uses an oil-bath lubrication system. This system keeps the main bearings lubricated constantly, for quiet operation and long-life. It is part of the good reason that this fan features a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique within the market in comparison to all the other fans? The Hunter Original will be the most unique ceiling fan about the market, with a design that goes towards the turn of the 20th century. Cast iron is employed within the motor housing construction to more effectively draw heat away from the electrical windings; heat can be a major enemy of electrical motors. The extra weight of the cast-iron construction also decreases the potential for fan wobble. The motor can also be greater than every other ceiling fan, which makes it the best motor available. This allows the blades to become pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components of the motor, and prolongs living of the motor. Added up, these unique design elements create a powerful, quiet fan that’s backed by way of a limited lifetime warranty.
How do fans cool the bedroom – would they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; it does not lower the bedroom temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on the skin. It will be the feeling you receive if you open the window in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can create a wind chill effect which makes you’re feeling just as if the temperature is 72 degrees. When used in conjunction having an air conditioning equipment, a ceiling fan can lower energy costs, since set the thermostat of the air conditioning equipment with a higher temperature.
Can the ceiling fan provide in the winter for any beneficial purpose? A ceiling fan can help lower energy consumption in the winter by around 15%. The temperature of the air in a heated room varies in layers; the environment at the ceiling is warmer than the air at the floor, because heated air rises. A ceiling fan can help push the warmer air that’s trapped at the ceiling down again into the bedroom, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it can be needed, and the heat won’t overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan needs to be run in a clockwise direction. This pushes the environment facing the ceilings and down the walls, to gently re-circulate the heated air without creating a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan operate on broadband will consume less power than the usual 100-watt bulb. How much can I expect to save in heating or cooling costs? A ceiling fan can conserve around 95% on cooling costs for a new install and 47% on an existing air-con system. It also can save around 15% on heating costs. Savings will vary based on energy rates. How easy can be a ceiling fan to setup? Most people will get an electrical contractor to setup a ceiling fan, it may be a DIY project but please take into account you will need to become able to: Locate a 2″ x 4″ and other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is roofed through the fan warranty – how does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for your stated life of the warranty; that’s, a 20-year warranty covers the motor parts for 20 years. Labour for your motor is mostly covered for 1-year, just like parts and labour for all the other components of the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company craigs list 115 years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans may be adjusted having an accessory handheld remote control sold separately from the fan. In fact, controllers will surely improve the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible from the comfort of the favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with all the fan during new installations or on fans that have been previously installed along with use for some time. The installation is a simple, do-it-yourself project and won’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands towards the fan plus a receiver which either conceals within the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away from the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans may be attached to angled or vaulted ceilings by using a follower canopy (the “cap” visible closest towards the ceiling which provides coverage for the electrical box) which has been built to accommodate sloped ceilings. Many quality fans includes this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included with all the fan at original purchase, accessory canopy adapters can be purchased separately at shops. What length drop rod should I use with my fan? Will the fan become more prone to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot for your dimension of the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod in order to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the potential for wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a reduced clock pendulum with a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it can be in a ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by way of a certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that won’t create a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum since they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled from the same wall switch? The answer here is dependent upon how your wall switch is now wired. If you have a single wall switch with two wires (one black, one white), the answer then is “no” if you don’t obtain a control specifically made for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up within the single wall switch and obtain a more common, dual control that can operate a follower and light-weight separately from one particular switch. Having an electrical contractor install a third wire may be expensive. What will be the difference in having a ceiling fan installed close towards the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet over the floor. Extension drop rods are widely-used to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for your distance from the top of the fan motor towards the switch housing bottom.