Hunter Dempsey Ceiling Fan – Hunter ceiling fans are without a doubt the best you can buy, take a look at have come up with all the details you need to understand ceiling fans before purchasing, please be aware that there are many ceiling fan manufacturers available who copy Hunter ceiling fan designs however they are nowhere close to good, the type of material they’ll use are not as high quality and they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so although many ceiling fans may look “just just like a Hunter,” remember all ceiling fans are not made the same. Most Hunter ceiling fans use a reverse option that is particularly significant to reduce heating bills during the cold months, heated air may be directed right down to where it’s required spinning the ceiling fan clockwise. Some points to think about when purchasing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is a comfort to no-one. One of the secrets to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the greater the air movement providing the blade pitch has been properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and do not use sufficient or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the stress on undersized or under-powered motors. Many fans also use extra thin blades to reduce cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes in addition to the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, in addition they move almost no air, causing very inefficient fans, Hunter fans are built to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is often the consequence of poor engineering design along with a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, despite the fact that they are a common method to obtain operating noise. A lack of proper dampening between metal parts may also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can produce varying examples of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get out of balance, generating wobble from the very heart of the fan. Inexpensive mounting systems with pin fasteners may also give rise to wobble. Hunter fans use a patented wobble free canopy meaning Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly attached to/off pull chains can become faulty and stay removed of the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to advertise. Defective motor windings can cause electrical shorts inside the motor. Low quality fan bearings could be “shielded” on the one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and dark spots begin to appear. You may even notice the brass about the fan is a different colour compared to the light kit you just added! Quality brass and other metallic finishes include a compilation of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, prevent the fan. Can you are feeling a smooth protective coating? That’s a sign of the kind of quality you will discover inside the famous Hunter Bright Brass Finish.
What will be the minimum height I need inside my room to set up a follower? Safety standards claim that the min height from the floor for the bottom of the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really be sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that kind of record to square on. So you have the comfort of knowing you have got the best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, greater air that’s being moved. The air moved with the fan generates a wind chill effect that produces you are feeling much more comfortable in a warm room. There is a direct relationship between air movement and comfort – greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with some additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag about the motor, scaling down the RPM of the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are equipped for optimal air delivery. How do I know what size fan to get – there are plenty of sizes available? You need to select the right size fan for any room to acquire optimum looks, comfort and savings. If the fan is too small for that room, it won’t move enough air to make you are feeling comfortable. If the fan is too big, it could move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why do a little fans require oil while others don’t? The Hunter Original carries a very unique motor that utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated constantly, for quiet operation and long-life. It is part of the good reason that this fan carries a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique inside the market in comparison to all the other fans? The Hunter Original will be the most unique ceiling fan about the market, which has a design that extends back for the turn of the 20th century. Cast iron is utilized inside the motor housing construction to more efficiently draw heat away from the electrical windings; heat is a major enemy of electrical motors. The extra weight of the cast-iron construction also reduces the prospect of fan wobble. The motor can be bigger than some other ceiling fan, making it the best motor available. This allows the blades to become pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components of the motor, and prolongs lifespan of the motor. Added up, these unique design elements make a powerful, quiet fan that’s backed by a limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it does not lower the room temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It will be the feeling you receive once you open your window in a moving car. If you use a ceiling fan in a room whose temperature is 80 degrees, running the fan can produce a wind chill effect that produces you are feeling like the temperature is 72 degrees. When employed in conjunction with an ac, a ceiling fan can lower energy costs, since you can set the thermostat of your respective ac with a higher temperature.
Can the ceiling fan be used during the cold months for just about any beneficial purpose? A ceiling fan will help lower energy consumption during the cold months by around 15%. The temperature of the air in a heated room varies in layers; the air close to the ceiling is warmer compared to the air close to the floor, because heated air rises. A ceiling fan will help push the warmer air that’s trapped close to the ceiling back down into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it’s needed, as well as the heating system won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan needs to be run in a clockwise direction. This pushes the air against the ceilings and on the walls, to gently re-circulate the heated air without developing a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run using high speed will consume less power than a 100-watt bulb. How much can I anticipate to save in heating as well as cooling costs? A ceiling fan can conserve around 95% on cooling costs for any new install and 47% on an existing air cooling system. It may also save around 15% on heating costs. Savings will be different according to energy rates. How easy is a ceiling fan to install? Most people is certain to get an electrician to install a ceiling fan, it may be a DIY project but please bear in mind you will need to become able to: Locate a 2″ x 4″ or other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included with the fan warranty – what makes the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for that stated life of the warranty; that’s, a 20-year warranty will take care of the motor parts for 20 years. Labour for that motor is usually covered for 1-year, much like parts and labour for all the other components of the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with 115 years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans may be adjusted with an accessory handheld remote control sold separately from the fan. In fact, controllers really can enhance the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible from the comfort of your respective favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with the fan during new installations or on fans which has been previously installed plus use for quite a while. The installation is a straightforward, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan along with a receiver which either conceals within the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away from the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans may be attached to angled or vaulted ceilings by using a follower canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which has been made to accommodate sloped ceilings. Many quality fans will include this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included with the fan at original purchase, accessory canopy adapters are sold separately at shops. What length drop rod should I use with my fan? Will the fan be a little more vulnerable to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot for that dimension of the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod to be able to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a reduced clock pendulum which has a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it’s in a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that won’t make a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum simply because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled from the same wall switch? The answer here is dependent upon how your wall switch is currently wired. If you use a single wall switch with two wires (one black, one white), the reply is “no” if you don’t get a control specifically made for this sort of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up inside the single wall switch and get a more common, dual control that can operate a follower and light-weight separately from an individual switch. Having an electrician put in a third wire may be expensive. What will be the difference in having a ceiling fan installed close for the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet above the floor. Extension drop rods are used to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot have to be allowed for that distance from the top of the fan motor for the switch housing bottom.