Is Your Ceiling Fan Too Big within sizing 1000 X 900Long Downrod Ceiling Fan – Hunter ceiling fans are undoubtedly the top you can purchase, have a look at have put together every piece of information you need to learn about ceiling fans before purchasing, please please remember there are more ceiling fan manufacturers out there who copy Hunter ceiling fan designs but you are nowhere near as good, the types of materials they will use usually are not as high quality plus they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so although many ceiling fans may look “just being a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a reverse option which can be especially important to lessen heating bills during the cold months, heated air could be directed right down to where it can be needed by spinning the ceiling fan clockwise. Some points to take into consideration when purchasing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to no person. One of the secrets of proper air movement is blade pitch. The greater the pitch-the angle of the blade-the harder the environment movement offering the blade pitch continues to be properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and don’t use just right or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the stress on undersized or under-powered motors. Many fans also employ extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes plus the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move almost no air, causing very inefficient fans, Hunter fans are built to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is usually the response to poor engineering design along with a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, even though they are a standard source of operating noise. A deficiency of proper dampening between metal parts may also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade supports can cause varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners may also help with wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains could become faulty and turn into removed of the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to advertise. Defective motor windings can cause electrical shorts inside motor. Low quality fan bearings could possibly be “shielded” on one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots set out to appear. You may even see the brass about the fan can be a different colour compared to the light kit you simply added! Quality brass and also other metallic finishes include a number of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, avoid the fan. Can you’re feeling an easy protective coating? That’s a sign of the kind of quality you will discover inside famous Hunter Bright Brass Finish.
What could be the minimum height I need within my room to set up a fan? Safety standards suggest that the min height in the floor for the bottom of the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that kind of record to stand on. So you obtain the comfort of knowing you may have the top-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the harder air which is being moved. The air moved from the fan produces a wind chill effect that produces you’re feeling more comfortable in a very warm room. There can be a direct relationship between air movement and comfort – the harder air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag about the motor, reducing the RPM of the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are designed for optimal air delivery. How do I understand what size fan to purchase – there are numerous sizes available? You need to pick the best size fan for any room to have optimum looks, comfort and energy savings. If the fan is way too small for the room, it doesn’t move enough air to make you’re feeling comfortable. If the fan is way too big, it could possibly move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do a little fans require oil and others usually do not? The Hunter Original includes a very unique motor which utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated at all times, for quiet operation and long-life. It is part of the reason this fan includes a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique inside market when compared with all the fans? The Hunter Original could be the most unique ceiling fan about the market, using a design that goes for the turn of the last century. Cast iron can be used inside motor housing construction to better draw heat away in the electrical windings; heat can be a major enemy of electrical motors. The extra weight of the cast-iron construction also reduces the prospect of fan wobble. The motor is additionally bigger than another ceiling fan, making it the most powerful motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components of the motor, and prolongs the life of the motor. Added up, these unique design elements create a powerful, quiet fan which is backed by the limited lifetime warranty.
How do fans cool the bedroom – will they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it does not lower the bedroom temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you receive if you open your window in a very moving car. If you have a ceiling fan in a very room whose temperature is 80 degrees, running the fan can cause a wind chill effect that produces you’re feeling as though the temperature is 72 degrees. When used in conjunction having an air conditioning equipment, a ceiling fan can lower energy costs, since you can set the thermostat of one’s air conditioning equipment with a higher temperature.
Can the ceiling fan provide during the cold months for any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by up to 15%. The temperature of the air in a very heated room varies in layers; the environment close to the ceiling is warmer compared to the air close to the floor, because heated air rises. A ceiling fan may help push the warmer air which is trapped close to the ceiling back into the bedroom, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it can be needed, and the furnace doesn’t overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan should be run in a very clockwise direction. This pushes the environment up against the ceilings and on the walls, to softly re-circulate the heated air without developing a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan are powered by high-speed will consume less power than the usual 100-watt light bulb. How much can I anticipate to save in heating as well as cooling costs? A ceiling fan can help to save up to 95% on cooling costs for any new install and 47% on an existing air cooling system. It may also save up to 15% on heating costs. Savings will be different according to energy rates. How easy can be a ceiling fan to set up? Most people will get a mason to set up a ceiling fan, it could be a DIY project but please keep in mind you will need to get able to: Locate a 2″ x 4″ or another suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is roofed from the fan warranty – how does the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for the stated life of the warranty; which is, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is mostly covered for 1-year, much like parts and labour for all the components of the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with 115 a lot of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans could be adjusted having an accessory remote control sold separately in the fan. In fact, remotes can really enhance the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible in the comfort of one’s favourite chair or bedside table. Ceiling fan and light remotes can easily be installed either with all the fan during new installations or on fans which were previously installed along with use for some time. The installation is a simple, do-it-yourself project and doesn’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan along with a receiver which either conceals inside the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away in the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans could be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which continues to be meant to accommodate sloped ceilings. Many quality fans will incorporate such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with all the fan at original purchase, accessory canopy adapters are sold separately at stores. What length drop rod should I use with my fan? Will the fan be prone to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot for the dimension of the fan. So if your ceiling height is 12 feet, you need a 3 foot drop rod in order to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a reduced clock pendulum using a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it can be in a very ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by the certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that doesn’t create a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum given that they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled in the same wall switch? The answer here is dependent upon how your wall switch is currently wired. If you have a single wall switch with two wires (one black, one white), the answer is “no” if you don’t purchase a control created for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside single wall switch and purchase a more common, dual control that may operate a fan and light separately from just one switch. Having a mason use a third wire could be expensive. What could be the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are widely-used to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to rate the fan at 8 feet (one foot should be allowed for the distance in the top of the fan motor for the switch housing bottom.
