Black Outdoor Ceiling Fans With Lights – Two top reasons to purchase a ceiling fan, cooling and heating. If you live in a very cold climate, fans can push heated air gathered at the ceiling back down. Ceiling fans can be an easy task to install if you have some mechanical aptitude. Current ceiling fans feature remote-controls to vary speed and adjust lighting. If your room already includes a light fixture in the ceiling, your light fixture probably has one hot or feed wire gonna it, the neutral white and also the bonding green or copper. Essentially this is the three-wire system. Many new construction homes have four wires available, one for that light the other for that fan motor control and also the neutral and ground. If you only have one Hot wire feeding the ceiling junction box, the remote-control fans work using your application. Additionally some remote-controlled fans use wall controller which sends its signal for the fan like a TV remote. It just seems like a wall control unit. If you really need the power wire to your remote-controlled fan, please cap off of the fourth wire which you will n’t need to work with. This should be shown within your directions that came with the fan assembly.
Once you have acquired a fan that suits you, assemble it according for the instructions given. Some fans really are a little more complex, ask a friend to help if required. It is best to makes it assembled correctly, using a ceiling fan blade thud your self on your head can be annoying. Once you have the pre-assembly completed, you can now prepare the ceiling junction box. Of course I know you have already made sure the power for the ceiling box is powered down with no one can energize it accidentally. Once you have performed this, you must find three wires in the J-box. A copper or green wire for bonding. A white wire for that neutral as well as a red or black wire for that power. If your junction box includes a fourth wire, this is create for a wall controlled fan switch that’s great and allows you to work with a non-remote wall controller. I should mention that some all fans feature a wall controllers designed as remotes so you shouldn’t be confused as these all assist the singular feed within your ceiling junction box.
A word about weight, not yours but a thing regarding the sized your fan. If you have a big fan as well as weighted near 12 pounds or maybe more, you need a special junction box that may secure the extra body fat. I would recommend i hear you ask somebody who knows about these heavier fans if that’s what you will be gonna install. Most fans are lighter and can be set up in most junction boxes without modifications.
Now let’s get it up there, the fan which is. Many fans feature a Hanger the same shape as a U. Install this hanger on your box, the screws should be 8/32 types. That means a size 8 diameter or gauge screw with 32 threads per inch. Once you have the hanger installed, grab your fan motor with no blades installed and hang up it around the hanger. This allows you the electrician to attach the wires without struggling to juggle the motor and wire it as well. Connect the bonding wire for the chassis as noted in the instructions. Next connect the white neutral wire, now the black wire. Swing the fan into place while using parts provided. Some have brackets, some use a metal plate although some use preformed mounting bases. Use your instructions and you will have a fan right away. Smaller fans may need that you pre-assemble your blades before hanging the fan. I always found installing the motor first after which installing the blades last is less difficult. It does require however, that you work above your face to have the blades attached.
Once you have the fan hanging, the blades installed and everything tightened you can now step off of the ladder, relax, then install the wall controller as provided. These all vary in design however they all follow similar procedures. Remember, you will find a line and load situation here. This means, the road side could be the set of wires the feed into the switch box in the panel while the Load side is gonna your fan. This is critical so make sure you see the difference. Connect the Load side first: Connect your bonding wire first. Then connect your white neutral wire. Then your hot wire. Next perform Line (incoming) side next: Bond or ground should already be composed for the new controller. Next wire your white neutral for the controllers neutral for that Line side. You may have already wired your neutrals together in accordance with your instructions. Now wire your Hot or Power wire for the Line side of your controller. If you have the fourth wire in that room, cap it off or use it for that motor control and connect it accordingly for a directions. Red to Red is often the case here. Once completed, get yourself some Iced Tea and enjoy a new fan.