Hunter Ceiling Fan Light Bulbs – Hunter ceiling fans are without doubt the very best you can buy, take a look at have assembled all the details you might need to know about ceiling fans before purchasing, please keep in mind there are more ceiling fan manufacturers out there who copy Hunter ceiling fan designs but you are nowhere near as good, the type of material they use aren’t as high quality and so they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so although ceiling fans may look “just like a Hunter,” remember all ceiling fans aren’t good quality. Most Hunter ceiling fans possess a reverse option that is especially important to reduce heating bills in winter, hot air could be directed down to where it can be essental to spinning the ceiling fan clockwise. Some points to think about when choosing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to no one. One with the secrets of proper air movement is blade pitch. The greater the pitch-the angle with the blade-the higher the environment movement supplying the blade pitch may be properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and do not use sufficient or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the load on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes as well as the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move little or no air, causing very inefficient fans, Hunter fans are built to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is usually the consequence of poor engineering design plus a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, despite the fact that these are generally a standard way to obtain operating noise. A lack of proper dampening between metal parts also can create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that aren’t matched in carefully weighed and balanced sets also can wobble. Inconsistent blade supports can cause varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get rid of balance, generating wobble from the very heart with the fan. Inexpensive mounting systems with pin fasteners also can give rise to wobble. Hunter fans possess a patented wobble free canopy this means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly set up on/off pull chains could become faulty and become removed with the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can cause electrical shorts in the motor. Low quality fan bearings might be “shielded” somewhere only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and dark spots commence to appear. You may even notice the brass for the fan can be a different colour than the light kit you just added! Quality brass and also other metallic finishes add a number of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, avoid the fan. Can you feel an easy protective coating? That’s a sign with the kind of quality you will find in the famous Hunter Bright Brass Finish.
What could be the minimum height I need inside my room to set up a fan? Safety standards state that the min height from the floor for the bottom with the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you possess a low ceiling, just really be sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that type of record to stand on. So you receive the peace of mind of knowing you have got the very best-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the harder air which is being moved. The air moved through the fan results in a wind chill effect that creates you feel much more comfortable in the warm room. There can be a direct relationship between air movement and comfort – the harder air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with many additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag for the motor, slowing the RPM with the blades, which decreases the CFM. All Hunter fans, whether four or five blades, focus on optimal air delivery. How do I understand what size fan to acquire – there are many sizes available? You need to pick the best size fan for a room to get optimum looks, comfort and savings. If the fan is just too small for your room, it will not move enough air to make you feel comfortable. If the fan is just too big, it might move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why carry out some fans require oil among others do not? The Hunter Original has a very unique motor that uses an oil-bath lubrication system. This system keeps the primary bearings lubricated all the time, for quiet operation and long-life. It is part with the good reason that this fan has a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique in the market in comparison with all other fans? The Hunter Original could be the most unique ceiling fan for the market, which has a design that extends back for the turn with the last century. Cast iron is employed in the motor housing construction to more effectively draw heat away from the electrical windings; heat can be a major enemy of electrical motors. The extra weight with the cast-iron construction also cuts down on the prospect of fan wobble. The motor is additionally larger than another ceiling fan, rendering it the best motor available. This allows the blades to get pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components with the motor, and prolongs the life span with the motor. Added up, these unique design elements create a powerful, quiet fan which is backed by way of a limited lifetime warranty.
How do fans cool the space – would they actually lower the temperature? A ceiling fan cools by making a wind chill effect; this doesn’t lower the space temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on the skin. It could be the feeling you get once you open of the question in the moving car. If you possess a ceiling fan in the room whose temperature is 80 degrees, running the fan can cause a wind chill effect that creates you feel as if the temperature is 72 degrees. When used in conjunction with an air conditioner, a ceiling fan can lower energy costs, since set the thermostat of your air conditioner at the higher temperature.
Can the ceiling fan provide in winter for almost any beneficial purpose? A ceiling fan can help lower energy consumption in winter by up to 15%. The temperature with the air in the heated room varies in layers; the environment near the ceiling is warmer than the air near the floor, because hot air rises. A ceiling fan can help push the warmer air which is trapped near the ceiling back into the space, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it can be needed, along with the home heating will not overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan needs to be run in the clockwise direction. This pushes the environment up against the ceilings and along the walls, to gently re-circulate the hot air without making a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on very fast will consume less power when compared to a 100-watt bulb. How much can I anticipate to save in heating or cooling costs? A ceiling fan can help to conserve up to 95% on cooling costs for a new install and 47% with an existing air conditioning system. It also can save up to 15% on heating costs. Savings will be different according to energy rates. How easy can be a ceiling fan to setup? Most people will get a mason to setup a ceiling fan, it could be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ or other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is roofed through the fan warranty – so how exactly does the Hunter warranty can rival other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for your stated life with the warranty; which is, a 20-year warranty will take care of the motor parts for 20 years. Labour for your motor is mostly covered for 1-year, just like parts and labour for all other components with the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 numerous years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans could be adjusted with an accessory remote control sold separately from the fan. In fact, controllers can really enhance the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible from the comfort of your favourite chair or bedside table. Ceiling fan and lightweight controllers can easily be installed either using the fan during new installations or on fans which have been previously installed as well as in use for a while. The installation is a straightforward, do-it-yourself project and will not require any professional wiring. Remote control kits add a handheld transmitter for sending commands for the fan plus a receiver which either conceals inside the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away from the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans could be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest for the ceiling which provides coverage for the electrical box) which may be made to accommodate sloped ceilings. Many quality fans should include this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included using the fan at original purchase, accessory canopy adapters can be bought separately at shops. What length drop rod should I use with my fan? Will the fan be a little more vulnerable to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot for your dimension with the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod as a way to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the prospect of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a reduced clock pendulum which has a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it can be in the ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by way of a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that will not create a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum given that they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled from the same wall switch? The answer here depends on how your wall switch is currently wired. If you possess a single wall switch with two wires (one black, one white), the answer then is “no” if you don’t obtain a control created specifically for this kind of switch (Hunter offers three models). The answer is “yes” if you possess a three wire set-up in the single wall switch and obtain a more common, dual control which will operate a fan and lightweight separately from just one switch. Having a mason install a third wire could be expensive. What could be the difference in having a ceiling fan installed close for the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet across the floor. Extension drop rods are employed to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to rate the fan at 8 feet (one foot should be allowed for your distance from the top with the fan motor for the switch housing bottom.