Retractable Blade Ceiling Fan With Light – Hunter ceiling fans are without a doubt the top you can purchase, have a look at have build all the details you will need to learn about ceiling fans before purchasing, please keep in mind there are many ceiling fan manufacturers available who copy Hunter ceiling fan designs but they are nowhere close to good, materials they use are not as high quality plus they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just as being a Hunter,” remember all ceiling fans are not made the same. Most Hunter ceiling fans use a reverse option which can be particularly important to lessen heating bills during the cold months, heated air might be directed as a result of where it’s essental to spinning the ceiling fan clockwise. Some points to take into consideration when selecting a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is a comfort to no-one. One with the keys to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the greater the air movement supplying the blade pitch continues to be properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials , nor use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the strain on undersized or under-powered motors. Many fans also have extra thin blades to lessen cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, but they also move very little air, resulting in very inefficient fans, Hunter fans are designed to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the consequence of poor engineering design plus a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, despite the fact that they’re a common source of operating noise. A lack of proper dampening between metal parts may also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans just use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can cause varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get free from balance, generating wobble from your very heart with the fan. Inexpensive mounting systems with pin fasteners may also bring about wobble. Hunter fans use a patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly attached to/off pull chains could become faulty and be pulled out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to promote. Defective motor windings can lead to electrical shorts inside the motor. Low quality fan bearings may be “shielded” on the one hand only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and dark spots set out to appear. You may even spot the brass around the fan is a different colour compared to the light kit you only added! Quality brass as well as other metallic finishes will include a series of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, prevent the fan. Can you feel a smooth protective coating? That’s a sign with the kind of quality you will find inside the famous Hunter Bright Brass Finish.
What may be the minimum height I need within my room to put up a fan? Safety standards state that the min height from your floor to the bottom with the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really ensure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that sort of record to face on. So you get the satisfaction of knowing you’ve got the top-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the greater air that is being moved. The air moved from the fan creates a wind chill effect that produces you feel much more comfortable in a very warm room. There is a direct relationship between air movement and comfort – the greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with some additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, focus on optimal air delivery. How do I understand what size fan to buy – there are plenty of sizes available? You need to select the right size fan for any room to obtain optimum looks, comfort and savings. If the fan is just too small for your room, it will not move enough air to make you feel comfortable. If the fan is just too big, it might move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do a little fans require oil and others usually do not? The Hunter Original includes a very unique motor that utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated all the time, for quiet operation and long-life. It is part with the good reason that this fan includes a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique inside the market in comparison to other fans? The Hunter Original may be the most unique ceiling fan around the market, having a design that goes back to the turn with the last century. Cast iron is utilized inside the motor housing construction to more efficiently draw heat away from your electrical windings; heat is a major enemy of electrical motors. The extra weight with the cast-iron construction also decreases the prospect of fan wobble. The motor can be bigger than any other ceiling fan, making it the best motor available. This allows the blades being pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components with the motor, and prolongs the life with the motor. Added up, these unique design elements create a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the room – can they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it doesn’t lower the room temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on the skin. It may be the feeling you will get if you open of the question in a very moving car. If you use a ceiling fan in a very room whose temperature is 80 degrees, running the fan can cause a wind chill effect that produces you feel as if the temperature is 72 degrees. When used in conjunction with an air conditioner, a ceiling fan can lower energy costs, since set the thermostat of one’s air conditioner with a higher temperature.
Can the ceiling fan supply during the cold months for almost any beneficial purpose? A ceiling fan can help lower energy consumption during the cold months by up to 15%. The temperature with the air in a very heated room varies in layers; the air near the ceiling is warmer compared to the air near the floor, because heated air rises. A ceiling fan can help push the warmer air that is trapped near the ceiling back off into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it’s needed, along with the home heating won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan should be run in a very clockwise direction. This pushes the air up against the ceilings and on the walls, to carefully re-circulate the heated air without setting up a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run using broadband will consume less power when compared to a 100-watt bulb. How much can I be prepared to save in heating and even cooling costs? A ceiling fan can help to save up to 95% on cooling costs for any new install and 47% with an existing air conditioning system. It may also save up to 15% on heating costs. Savings vary based on energy rates. How easy is a ceiling fan to install? Most people is certain to get an electrical contractor to install a ceiling fan, it might be a DIY project but please keep in mind you will need being able to: Locate a 2″ x 4″ or other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is covered from the fan warranty – how can the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for your stated life with the warranty; that is, a 20-year warranty will handle the motor parts for 20 years. Labour for your motor is usually covered for 1-year, just like parts and labour for other components with the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with 115 many years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans might be adjusted with an accessory remote control sold separately from your fan. In fact, controllers can definitely boost the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible from your comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either using the fan during new installations or on fans that have been previously installed plus use for a while. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands to the fan plus a receiver which either conceals inside the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away from your fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans might be attached to angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which covers the electrical box) which continues to be meant to accommodate sloped ceilings. Many quality fans includes such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included using the fan at original purchase, accessory canopy adapters can be bought separately at retail outlets. What length drop rod should I use with my fan? Will the fan be more susceptible to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for your dimension with the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod in order to properly position the fan 8 feet from your floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the prospect of wobble. Think of a grandfather clock pendulum as well as slow, heavy swing versus a lesser clock pendulum having a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it’s in a very ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by the certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that won’t create a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum simply because they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled from your same wall switch? The answer here depends upon how your wall switch happens to be wired. If you use a single wall switch with two wires (one black, one white), the answer then is “no” unless you obtain a control specifically made for such a switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up inside the single wall switch and obtain a more common, dual control which will operate a fan and light-weight separately from just one switch. Having an electrical contractor purchase a third wire might be expensive. What may be the difference in having a ceiling fan installed close to the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to put the fan at 8 feet (one foot must be allowed for your distance from your top with the fan motor to the switch housing bottom.