Raptor Brushed Nickel Ceiling Fan W Silver Blades Westlake inside sizing 1500 X 1500Silver Blade Ceiling Fan – Hunter ceiling fans are without doubt the best you should buy, have a look at have build all the information you will need to learn about ceiling fans before purchasing, please please remember there are additional ceiling fan manufacturers around who copy Hunter ceiling fan designs but they are nowhere close to good, the materials they’ll use usually are not as top quality plus they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although ceiling fans may look “just just like a Hunter,” remember all ceiling fans usually are not good quality. Most Hunter ceiling fans have a reverse option which can be especially important to reduce heating bills in winter, heated air might be directed down to where it can be needed by spinning the ceiling fan clockwise. Some points to take into account when purchasing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air can be a comfort to no-one. One with the secrets to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the greater mid-air movement providing the blade pitch has become properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials , nor use sufficient or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the stress on undersized or under-powered motors. Many fans also use extra thin blades to reduce cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move hardly any air, resulting in very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the results of poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, despite the fact that these are generally a typical source of operating noise. A not enough proper dampening between metal parts also can create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets also can wobble. Inconsistent blade mounting brackets can create varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble from your very heart with the fan. Inexpensive mounting systems with pin fasteners also can bring about wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains could become faulty and be got out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to promote. Defective motor windings can bring about electrical shorts in the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and brown spots start to appear. You may even see the brass around the fan can be a different colour compared to light kit you merely added! Quality brass and also other metallic finishes will include a group of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, avoid the fan. Can you’re feeling an easy protective coating? That’s a sign with the kind of quality you will discover in the famous Hunter Bright Brass Finish.
What could be the minimum height I need inside my room to set up a fan? Safety standards state that the min height from your floor on the bottom with the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that type of record to face on. So you receive the reassurance of knowing you have the best-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the more air that is certainly being moved. The air moved from the fan produces a wind chill effect that creates you’re feeling convenient inside a warm room. There can be a direct relationship between air movement and comfort – the more air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with some additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are prepared for optimal air delivery. How do I know very well what size fan to buy – there are many sizes available? You need to choose the best size fan to get a room to have optimum looks, comfort as well as savings. If the fan is way too small for the room, it does not move enough air to make you’re feeling comfortable. If the fan is way too big, it may move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do some fans require oil and others tend not to? The Hunter Original includes a very unique motor that uses an oil-bath lubrication system. This system keeps the primary bearings lubricated at all times, for quiet operation and long-life. It is part with the good reason that this fan includes a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique in the market when compared with other fans? The Hunter Original could be the most unique ceiling fan around the market, using a design that extends back on the turn with the 20th century. Cast iron can be used in the motor housing construction to better draw heat away from your electrical windings; heat can be a major enemy of electrical motors. The extra weight with the cast-iron construction also reduces the possibility of fan wobble. The motor can also be bigger than any other ceiling fan, so that it is the most powerful motor available. This allows the blades being pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components with the motor, and prolongs living with the motor. Added up, these unique design elements make a powerful, quiet fan that is certainly backed by the limited lifetime warranty.
How do fans cool the room – do they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; this doesn’t lower the room temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on the skin. It could be the feeling you receive once you open of the question inside a moving car. If you have a ceiling fan inside a room whose temperature is 80 degrees, running the fan can create a wind chill effect that creates you’re feeling as though the temperature is 72 degrees. When employed in conjunction with the ac, a ceiling fan can lower energy costs, since you can set the thermostat of the ac with a higher temperature.
Can the ceiling fan be used in winter for almost any beneficial purpose? A ceiling fan may help lower energy consumption in winter by approximately 15%. The temperature with the air inside a heated room varies in layers; mid-air nearby the ceiling is warmer compared to air nearby the floor, because heated air rises. A ceiling fan may help push the warmer air that is certainly trapped nearby the ceiling down again into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it can be needed, and the heating system will not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan should be run inside a clockwise direction. This pushes mid-air facing the ceilings and down the walls, to carefully re-circulate the heated air without developing a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on broadband will consume less power compared to a 100-watt light bulb. How much can I anticipate to save in heating and even cooling costs? A ceiling fan can help to save approximately 95% on cooling costs to get a new install and 47% on an existing air cooling system. It also can save approximately 15% on heating costs. Savings vary according to energy rates. How easy can be a ceiling fan to install? Most people are certain to get an electrician to install a ceiling fan, it might be a DIY project but please bear in mind you will need being able to: Locate a 2″ x 4″ or another suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included from the fan warranty – what makes the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for the stated life with the warranty; that is certainly, a 20-year warranty will take care of the motor parts for 20 years. Labour for the motor is generally covered for 1-year, much like parts and labour for other components with the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company craigs list 115 many years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans might be adjusted with the accessory remote device sold separately from your fan. In fact, controllers can definitely enhance the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible from your comfort of the favourite chair or bedside table. Ceiling fan and light controllers can easily be installed either using the fan during new installations or on fans that have been previously installed and in use for a long time. The installation is an easy, do-it-yourself project and will not require any professional wiring. Remote control kits will include a handheld transmitter for sending commands on the fan and a receiver which either conceals within the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away from your fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans might be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest on the ceiling which covers the electrical box) which has become meant to accommodate sloped ceilings. Many quality fans will incorporate such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included using the fan at original purchase, accessory canopy adapters are offered separately at stores. What length drop rod should I use with my fan? Will the fan become more prone to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for the dimension with the fan. So if your ceiling height is 12 feet, you need a 3 foot drop rod in order to properly position the fan 8 feet from your floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the possibility of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a reduced clock pendulum using a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it can be inside a ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by the certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that will not make a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum simply because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan and a light kit be controlled from your same wall switch? The answer here is determined by how your wall switch happens to be wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” unless you buy a control created specifically for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up in the single wall switch and buy a more common, dual control which will operate a fan and light separately from just one switch. Having an electrician install a third wire might be expensive. What could be the difference in having a ceiling fan installed close on the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet over the floor. Extension drop rods are employed to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed for the distance from your top with the fan motor on the switch housing bottom.
