Hamilton Ceiling Fan – Hunter ceiling fans are undoubtedly the top you should buy, take a look at have put together every piece of information you might need to know about ceiling fans before purchasing, please keep in mind there are more ceiling fan manufacturers around who copy Hunter ceiling fan designs but they’re nowhere near as good, the type of material they use usually are not as good quality plus they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so although ceiling fans may look “just being a Hunter,” remember all ceiling fans usually are not good quality. Most Hunter ceiling fans have a very reverse option that is particularly important to relieve heating bills in the winter, warm air may be directed down to where it really is essental to spinning the ceiling fan clockwise. Some points to take into account when choosing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is a comfort to no one. One with the secrets to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the higher the environment movement supplying the blade pitch has been properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and use big enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the strain on undersized or under-powered motors. Many fans also use extra thin blades to relieve cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes in addition to the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, in addition they move hardly any air, leading to very inefficient fans, Hunter fans are designed to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the results of poor engineering design plus a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, despite the fact that these are a common way to obtain operating noise. A deficiency of proper dampening between metal parts could also create and intensify noise, as can the usage of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that usually are not matched in carefully weighed and balanced sets could also wobble. Inconsistent blade mounting brackets can make varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get free from balance, generating wobble in the very heart with the fan. Inexpensive mounting systems with pin fasteners could also give rise to wobble. Hunter fans have a very patented wobble free canopy this means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly installed on/off pull chains can be faulty and be pulled out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to advertise. Defective motor windings can result in electrical shorts in the motor. Low quality fan bearings might be “shielded” somewhere only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and brown spots set out to appear. You may even spot the brass about the fan is a different colour as opposed to light kit you only added! Quality brass and other metallic finishes add a group of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, stay away from the fan. Can you’re feeling an even protective coating? That’s a sign with the kind of quality you will find in the famous Hunter Bright Brass Finish.
What may be the minimum height I need in my room that will put up a fan? Safety standards claim that the min height in the floor towards the bottom with the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make certain that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that sort of record to square on. So you obtain the peace of mind of knowing you have the top-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, greater air that’s being moved. The air moved by the fan produces a wind chill effect that makes you’re feeling convenient in the warm room. There is a direct relationship between air movement and comfort – greater air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with a few additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag about the motor, reducing the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, focus on optimal air delivery. How do I determine what size fan to buy – there are so many sizes available? You need to pick the best size fan for a room to obtain optimum looks, comfort and savings. If the fan is too small to the room, it does not move enough air to make you’re feeling comfortable. If the fan is too big, it may move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why carry out some fans require oil and others usually do not? The Hunter Original features a very unique motor which uses an oil-bath lubrication system. This system keeps the key bearings lubricated all the time, for quiet operation and long-life. It is part with the reasons why this fan features a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique in the market in comparison to all other fans? The Hunter Original may be the most unique ceiling fan about the market, having a design that goes towards the turn with the 20th century. Cast iron can be used in the motor housing construction to more efficiently draw heat away in the electrical windings; heat is a major enemy of electrical motors. The extra weight with the cast-iron construction also cuts down on the risk of fan wobble. The motor is also larger than some other ceiling fan, which makes it the strongest motor available. This allows the blades being pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components with the motor, and prolongs lifespan with the motor. Added up, these unique design elements make a powerful, quiet fan that’s backed by way of a limited lifetime warranty.
How do fans cool the space – do they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; this doesn’t lower the space temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration onto the skin. It may be the feeling you obtain when you open your window in the moving car. If you have a very ceiling fan in the room whose temperature is 80 degrees, running the fan can make a wind chill effect that makes you’re feeling as if the temperature is 72 degrees. When employed in conjunction having an air conditioning equipment, a ceiling fan can lower energy costs, since you can set the thermostat of your respective air conditioning equipment with a higher temperature.
Can the ceiling fan supply in the winter for almost any beneficial purpose? A ceiling fan can help lower energy consumption in the winter by approximately 15%. The temperature with the air in the heated room varies in layers; the environment near the ceiling is warmer as opposed to air near the floor, because warm air rises. A ceiling fan can help push the warmer air that’s trapped near the ceiling back down into the space, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it really is needed, as well as the home heating won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan must be run in the clockwise direction. This pushes the environment against the ceilings and on the walls, to carefully re-circulate the warm air without developing a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run using high-speed will consume less power than a 100-watt bulb. How much can I expect to save in heating and even cooling costs? A ceiling fan can save approximately 95% on cooling costs for a new install and 47% by using an existing air cooling system. It could also save approximately 15% on heating costs. Savings vary depending on energy rates. How easy is a ceiling fan to setup? Most people can get an electrician to setup a ceiling fan, it may be a DIY project but please remember you will need being able to: Locate a 2″ x 4″ or other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is covered by the fan warranty – what makes the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts to the stated life with the warranty; that’s, a 20-year warranty will cover the motor parts for 20 years. Labour to the motor is generally covered for 1-year, as well as parts and labour for all other components with the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 a lot of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans may be adjusted having an accessory remote control sold separately in the fan. In fact, remote controls will surely increase the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible in the comfort of your respective favourite chair or bedside table. Ceiling fan and lightweight remote controls can easily be installed either while using fan during new installations or on fans which were previously installed and in use for quite a while. The installation is a straightforward, do-it-yourself project and won’t require any professional wiring. Remote control kits add a handheld transmitter for sending commands towards the fan plus a receiver which either conceals within the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans may be installed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest towards the ceiling which covers the electrical box) which has been made to accommodate sloped ceilings. Many quality fans will incorporate this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included while using fan at original purchase, accessory canopy adapters can be bought separately at retail stores. What length drop rod should I use with my fan? Will the fan be a little more at risk of wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot to the dimension with the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the risk of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a reduced clock pendulum having a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in the ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by way of a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that won’t make a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum since they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled in the same wall switch? The answer here is dependent upon how your wall switch is currently wired. If you have a very single wall switch with two wires (one black, one white), the answer is “no” until you get a control created for this sort of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up in the single wall switch and get a more common, dual control that will operate a fan and lightweight separately from a single switch. Having an electrician install a third wire may be expensive. What may be the difference in having a ceiling fan installed close towards the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet across the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed to the distance in the top with the fan motor towards the switch housing bottom.