Mini Ceiling Fans – Hunter ceiling fans are without a doubt the very best you can get, here we have assembled everything you might need to understand ceiling fans before purchasing, please keep in mind there are many ceiling fan manufacturers available who copy Hunter ceiling fan designs however they are nowhere close to as good, the materials they use are certainly not as good quality and so they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so even though many ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not made the same. Most Hunter ceiling fans use a reverse option which is especially important to reduce heating bills in the winter, heated air can be directed into where it is essental to spinning the ceiling fan clockwise. Some points to take into consideration when purchasing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is really a comfort to no one. One from the keys to proper air movement is blade pitch. The greater the pitch-the angle from the blade-the harder air movement providing the blade pitch may be properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and use sufficient or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the strain on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes plus the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move very little air, leading to very inefficient fans, Hunter fans are built to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is usually the results of poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, even though these are a common supply of operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans only use the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that are certainly not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade supports can make varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get out of balance, generating wobble in the very heart from the fan. Inexpensive mounting systems with pin fasteners may also contribute to wobble. Hunter fans use a patented wobble free canopy this means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly placed on/off pull chains can be faulty and become pulled out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to advertise. Defective motor windings can lead to electrical shorts in the motor. Low quality fan bearings could possibly be “shielded” somewhere only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and dark spots commence to appear. You may even spot the brass for the fan is really a different colour than the light kit you merely added! Quality brass as well as other metallic finishes add a compilation of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, stay away from the fan. Can you’re feeling a smooth protective coating? That’s a sign from the kind of quality you will find in the famous Hunter Bright Brass Finish.
What will be the minimum height I need within my room to set up a fan? Safety standards declare that the min height in the floor to the bottom from the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really make sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that type of record to face on. So you obtain the satisfaction of knowing you may have the very best-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the harder air that is being moved. The air moved through the fan creates a wind chill effect that produces you’re feeling much more comfortable in a very warm room. There is really a direct relationship between air movement and comfort – the harder air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag for the motor, slowing the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are designed for optimal air delivery. How do I determine what size fan to purchase – there are numerous sizes available? You need to select the right size fan for the room to acquire optimum looks, comfort as well as savings. If the fan is too small for that room, it will not move enough air to make you’re feeling comfortable. If the fan is too big, it could possibly move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why carry out some fans require oil while others usually do not? The Hunter Original has a very unique motor which utilizes an oil-bath lubrication system. This system keeps the principle bearings lubricated all the time, for quiet operation and long-life. It is part from the reasons why this fan has a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique in the market when compared with all other fans? The Hunter Original will be the most unique ceiling fan for the market, with a design that goes to the turn from the twentieth century. Cast iron is utilized in the motor housing construction to more efficiently draw heat away in the electrical windings; heat is really a major enemy of electrical motors. The extra weight from the cast-iron construction also cuts down on possibility of fan wobble. The motor is additionally greater than any other ceiling fan, so that it is the best motor available. This allows the blades to get pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components from the motor, and prolongs living from the motor. Added up, these unique design elements develop a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the bedroom – can they actually lower the temperature? A ceiling fan cools by making a wind chill effect; it does not lower the bedroom temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on your skin. It will be the feeling you obtain once you open your window in a very moving car. If you use a ceiling fan in a very room whose temperature is 80 degrees, running the fan can make a wind chill effect that produces you’re feeling as though the temperature is 72 degrees. When found in conjunction having an air conditioner, a ceiling fan can lower energy costs, since set the thermostat of your respective air conditioner at the higher temperature.
Can the ceiling fan provide in the winter for just about any beneficial purpose? A ceiling fan might help lower energy consumption in the winter by around 15%. The temperature from the air in a very heated room varies in layers; air near the ceiling is warmer than the air near the floor, because heated air rises. A ceiling fan might help push the warmer air that is trapped near the ceiling back off into the bedroom, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it is needed, as well as the heating system does not overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan needs to be run in a very clockwise direction. This pushes air against the ceilings and around the walls, to carefully re-circulate the heated air without making a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan operate on broadband will consume less power than the usual 100-watt light bulb. How much can I be prepared to save in heating as well as cooling costs? A ceiling fan can help to conserve around 95% on cooling costs for the new install and 47% on an existing air cooling system. It may also save around 15% on heating costs. Savings will vary according to energy rates. How easy is really a ceiling fan to set up? Most people are certain to get an electrician to set up a ceiling fan, it can be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ or other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is roofed through the fan warranty – what makes the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for that stated life from the warranty; that is, a 20-year warranty covers the motor parts for 20 years. Labour for that motor is mostly covered for 1-year, much like parts and labour for all other components from the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with more than 115 numerous years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans can be adjusted having an accessory remote device sold separately in the fan. In fact, controllers can really boost the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible in the comfort of your respective favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with the fan during new installations or on fans which have been previously installed along with use for a while. The installation is a straightforward, do-it-yourself project and does not require any professional wiring. Remote control kits add a handheld transmitter for sending commands to the fan and a receiver which either conceals inside fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away in the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans can be placed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which covers the electrical box) which may be designed to accommodate sloped ceilings. Many quality fans includes this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included with the fan at original purchase, accessory canopy adapters can be purchased separately at retail stores. What length drop rod should I use with my fan? Will the fan be vulnerable to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot for that dimension from the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod so that you can properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the possibility of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a lesser clock pendulum with a fast, unsteady swing. Weight and length combine to generate stability, reducing wobble, whether it is in a very ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that does not develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum given that they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled in the same wall switch? The answer here is determined by how your wall switch is wired. If you use a single wall switch with two wires (one black, one white), the answer then is “no” if you do not purchase a control specifically designed for this sort of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up in the single wall switch and purchase a more common, dual control that may operate a fan and light-weight separately from an individual switch. Having an electrician use a third wire can be expensive. What will be the difference in having a ceiling fan installed close to the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet higher than the floor. Extension drop rods are widely-used to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for that distance in the top from the fan motor to the switch housing bottom.