Modern Ceiling Fans With Lights – Hunter ceiling fans are without doubt the best you can buy, have a look at have come up with everything you will need to learn about ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers out there who copy Hunter ceiling fan designs but they’re nowhere close to good, the materials they will use aren’t as good quality and they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so although ceiling fans may look “just being a Hunter,” remember all ceiling fans aren’t built the same. Most Hunter ceiling fans have a reverse option that is especially important to reduce heating bills in winter, heated air may be directed down to where it really is required spinning the ceiling fan clockwise. Some points to think about when purchasing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is really a comfort to no-one. One of the secrets to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the higher the air movement offering the blade pitch may be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and use large enough or powerful enough motors to compliment proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the strain on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes plus the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, in addition they move very little air, resulting in very inefficient fans, Hunter fans are created to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is usually the result of poor engineering design along with a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, although they are a typical supply of operating noise. A lack of proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that aren’t matched in carefully weighed and balanced sets may also wobble. Inconsistent blade supports can produce varying examples of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners may also bring about wobble. Hunter fans have a patented wobble free canopy meaning Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly attached to/off pull chains could become faulty and become brought out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can result in electrical shorts inside the motor. Low quality fan bearings may be “shielded” on one side only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are utilized to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and dark spots commence to appear. You may even see the brass for the fan is really a different colour compared to the light kit you just added! Quality brass along with other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, steer clear of the fan. Can you are feeling a smooth protective coating? That’s a sign of the kind of quality you can find inside the famous Hunter Bright Brass Finish.
What could be the minimum height I need inside my room to set up an admirer? Safety standards state that the min height in the floor for the bottom of the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really be sure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that type of record to stand on. So you get the comfort of knowing you have the best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the greater air that’s being moved. The air moved by the fan generates a wind chill effect which makes you are feeling convenient in a warm room. There is really a direct relationship between air movement and comfort – the greater air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with some additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag for the motor, reducing the RPM of the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are equipped for optimal air delivery. How do I understand what size fan to get – there are so many sizes available? You need to pick the best size fan for the room to have optimum looks, comfort and energy savings. If the fan is simply too small for your room, it doesn’t move enough air to make you are feeling comfortable. If the fan is simply too big, it could move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do a little fans require oil and others do not? The Hunter Original has a very unique motor which uses an oil-bath lubrication system. This system keeps the main bearings lubricated at all times, for quiet operation and long-life. It is part of the good reason that this fan has a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside the market in comparison with all other fans? The Hunter Original could be the most unique ceiling fan for the market, using a design that extends back for the turn of the last century. Cast iron can be used inside the motor housing construction to more effectively draw heat away in the electrical windings; heat is really a major enemy of electrical motors. The extra weight of the cast-iron construction also decreases the prospect of fan wobble. The motor is also greater than any other ceiling fan, so that it is the most powerful motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components of the motor, and prolongs the life of the motor. Added up, these unique design elements develop a powerful, quiet fan that’s backed with a limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it does not lower the room temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It could be the feeling you receive when you open of the question in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can produce a wind chill effect which makes you are feeling as if the temperature is 72 degrees. When utilized in conjunction with an air conditioner, a ceiling fan can lower energy costs, because you can set the thermostat of the air conditioner with a higher temperature.
Can the ceiling fan supply in winter for any beneficial purpose? A ceiling fan will help lower energy consumption in winter by around 15%. The temperature of the air in a heated room varies in layers; the air at the ceiling is warmer compared to the air at the floor, because heated air rises. A ceiling fan will help push the warmer air that’s trapped at the ceiling back down into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it really is needed, and the furnace does not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan must be run in a clockwise direction. This pushes the air up against the ceilings and down the walls, to carefully re-circulate the heated air without developing a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan are powered by high-speed will consume less power compared to a 100-watt lamp. How much can I be prepared to save in heating as well as cooling costs? A ceiling fan can help to save around 95% on cooling costs for the new install and 47% by using an existing air cooling system. It may also save around 15% on heating costs. Savings will vary depending on energy rates. How easy is really a ceiling fan to setup? Most people will get an electrician to setup a ceiling fan, it may be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ or other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included by the fan warranty – how can the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for your stated life of the warranty; that’s, a 20-year warranty will cover the motor parts for 20 years. Labour for your motor is mostly covered for 1-year, just like parts and labour for all other components of the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 a lot of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans may be adjusted with an accessory remote device sold separately in the fan. In fact, controllers will surely improve the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible in the comfort of the favourite chair or bedside table. Ceiling fan and lightweight controllers can easily be installed either while using fan during new installations or on fans which has been previously installed along with use for some time. The installation is a straightforward, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan along with a receiver which either conceals inside the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away in the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans may be attached to angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest for the ceiling which covers the electrical box) which may be meant to accommodate sloped ceilings. Many quality fans will incorporate this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included while using fan at original purchase, accessory canopy adapters are sold separately at shops. What length drop rod should I use with my fan? Will the fan be susceptible to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot for your dimension of the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod in order to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the prospect of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a lesser clock pendulum using a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it really is in a ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated with a certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that does not develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled in the same wall switch? The answer here is dependent upon how your wall switch is now wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you don’t obtain a control specifically made for this kind of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and obtain a more common, dual control which will operate an admirer and lightweight separately from just one switch. Having an electrician put in a third wire may be expensive. What could be the difference in having a ceiling fan installed close for the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet over the floor. Extension drop rods are utilized to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for your distance in the top of the fan motor for the switch housing bottom.