Ceiling Fan Outdoor – Hunter ceiling fans are unquestionably the top you can get, have a look at have put together all the details you need to understand ceiling fans before purchasing, please bear in mind that there are more ceiling fan manufacturers out there who copy Hunter ceiling fan designs but they’re nowhere close to good, the materials they normally use usually are not as good quality plus they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so although ceiling fans may look “just just like a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a reverse option which is particularly important to cut back heating bills in the winter months, heated air may be directed down to where it really is essental to spinning the ceiling fan clockwise. Some points to take into consideration when buying a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is really a comfort to nobody. One in the recommendations for proper air movement is blade pitch. The greater the pitch-the angle in the blade-the harder the air movement offering the blade pitch may be properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and don’t use big enough or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the worries on undersized or under-powered motors. Many fans also have extra thin blades to cut back cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes together with amount of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move very little air, resulting in very inefficient fans, Hunter fans are created to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is truly the results of poor engineering design plus a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, although they are a typical source of operating noise. A deficiency of proper dampening between metal parts can also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade mounting brackets can create varying examples of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get out of balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans have a patented wobble free canopy this means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly attached to/off pull chains may become faulty and stay pulled out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to promote. Defective motor windings can result in electrical shorts inside motor. Low quality fan bearings may be “shielded” on one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots set out to appear. You may even notice the brass about the fan is really a different colour compared to the light kit you just added! Quality brass and other metallic finishes will include a number of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, prevent the fan. Can you really feel an even protective coating? That’s a sign in the kind of quality you will find inside famous Hunter Bright Brass Finish.
What is the minimum height I need within my room to put up a follower? Safety standards claim that the min height through the floor towards the bottom in the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that type of record to square on. So you get the comfort of knowing you may have the top-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the harder air that’s being moved. The air moved by the fan results in a wind chill effect that produces you really feel convenient in the warm room. There is really a direct relationship between air movement and comfort – the harder air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with many additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag about the motor, reducing the RPM in the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are equipped for optimal air delivery. How do I determine what size fan to acquire – there are so many sizes available? You need to choose the right size fan for the room to obtain optimum looks, comfort and savings. If the fan is too small for the room, it does not move enough air to make you really feel comfortable. If the fan is too big, it could possibly move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why carry out some fans require oil while others tend not to? The Hunter Original includes a very unique motor that uses an oil-bath lubrication system. This system keeps the main bearings lubricated constantly, for quiet operation and long-life. It is part in the reasons why this fan includes a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique inside market in comparison with all other fans? The Hunter Original is the most unique ceiling fan about the market, with a design that extends back towards the turn in the twentieth century. Cast iron is used inside motor housing construction to better draw heat away through the electrical windings; heat is really a major enemy of electrical motors. The extra weight in the cast-iron construction also reduces the prospect of fan wobble. The motor is additionally bigger than some other ceiling fan, so that it is the strongest motor available. This allows the blades being pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components in the motor, and prolongs the life in the motor. Added up, these unique design elements develop a powerful, quiet fan that’s backed by the limited lifetime warranty.
How do fans cool the space – would they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; this doesn’t lower the space temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on the skin. It is the feeling you obtain whenever you open of the question in the moving car. If you have a ceiling fan in the room whose temperature is 80 degrees, running the fan can create a wind chill effect that produces you really feel just as if the temperature is 72 degrees. When found in conjunction by having an air conditioning unit, a ceiling fan can lower energy costs, since you can set the thermostat of one’s air conditioning unit with a higher temperature.
Can the ceiling fan be used in the winter months for virtually any beneficial purpose? A ceiling fan may help lower energy consumption in the winter months by approximately 15%. The temperature in the air in the heated room varies in layers; the air at the ceiling is warmer compared to the air at the floor, because heated air rises. A ceiling fan may help push the warmer air that’s trapped at the ceiling down again into the space, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it really is needed, as well as the home heating won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan ought to be run in the clockwise direction. This pushes the air against the ceilings and on the walls, to gently re-circulate the heated air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run using broadband will consume less power when compared to a 100-watt bulb. How much can I be prepared to save in heating and or cooling costs? A ceiling fan can help to conserve approximately 95% on cooling costs for the new install and 47% with an existing air-con system. It can also save approximately 15% on heating costs. Savings will be different depending on energy rates. How easy is really a ceiling fan to set up? Most people will get an electrician to set up a ceiling fan, it may be a DIY project but please take into account you will need being able to: Locate a 2″ x 4″ or any other suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is covered by the fan warranty – how does the Hunter warranty can rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for the stated life in the warranty; that’s, a 20-year warranty will handle the motor parts for 20 years. Labour for the motor is normally covered for 1-year, as are parts and labour for all other components in the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company with more than 115 years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans may be adjusted by having an accessory handheld remote control sold separately through the fan. In fact, remote controls really can enhance the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and lightweight remote controls can easily be installed either with all the fan during new installations or on fans that have been previously installed plus use for some time. The installation is a straightforward, do-it-yourself project and won’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands towards the fan plus a receiver which either conceals within the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away through the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans may be attached to angled or vaulted ceilings by using a follower canopy (the “cap” visible closest towards the ceiling which takes care of the electrical box) which may be built to accommodate sloped ceilings. Many quality fans will incorporate such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with all the fan at original purchase, accessory canopy adapters can be bought separately at stores. What length drop rod should I use with my fan? Will the fan be at risk of wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot for the dimension in the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus an inferior clock pendulum with a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in the ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that won’t develop a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum since they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan plus a light kit be controlled through the same wall switch? The answer here is dependent upon how your wall switch happens to be wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you don’t buy a control created for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside single wall switch and buy a more common, dual control that can operate a follower and lightweight separately from one particular switch. Having an electrician use a third wire may be expensive. What is the difference in having a ceiling fan installed close towards the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet across the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for the distance through the top in the fan motor towards the switch housing bottom.