Antique White Ceiling Fan – Hunter ceiling fans are unquestionably the top you should buy, take a look at have put together all the information you might need to understand about ceiling fans before purchasing, please bear in mind that there are additional ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but they’re nowhere near as good, the types of materials they normally use are not as good quality and so they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just as being a Hunter,” remember all ceiling fans are not made the same. Most Hunter ceiling fans use a reverse option that’s particularly important to lessen heating bills in the winter months, hot air could be directed down to where it really is required by spinning the ceiling fan clockwise. Some points to take into account when choosing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is often a comfort to no-one. One with the secrets of proper air movement is blade pitch. The greater the pitch-the angle with the blade-the harder the air movement providing the blade pitch has been properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and use large enough or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the worries on undersized or under-powered motors. Many fans also have extra thin blades to lessen cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes together with volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move very little air, producing very inefficient fans, Hunter fans are created to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is often the consequence of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, despite the fact that these are generally a common method to obtain operating noise. A lack of proper dampening between metal parts may also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can cause varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get free from balance, generating wobble from the very heart with the fan. Inexpensive mounting systems with pin fasteners may also contribute to wobble. Hunter fans use a patented wobble free canopy which means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly set up on/off pull chains can become faulty and turn into removed with the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to advertise. Defective motor windings can bring about electrical shorts within the motor. Low quality fan bearings might be “shielded” on the one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and brown spots begin to appear. You may even spot the brass around the fan is often a different colour compared to light kit you just added! Quality brass along with other metallic finishes will include a group of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, avoid the fan. Can you are feeling an easy protective coating? That’s a sign with the kind of quality you’ll find within the famous Hunter Bright Brass Finish.
What will be the minimum height I need within my room to set up a fan? Safety standards claim that the min height from the floor towards the bottom with the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really make certain that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that sort of record to stand on. So you receive the comfort of knowing you may have the top-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, greater air that is certainly being moved. The air moved by the fan generates a wind chill effect which makes you are feeling more at ease in a very warm room. There is often a direct relationship between air movement and comfort – greater air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are designed for optimal air delivery. How do I understand what size fan to acquire – there are many sizes available? You need to choose the right size fan for the room to acquire optimum looks, comfort and energy savings. If the fan is just too small for the room, it does not move enough air to make you are feeling comfortable. If the fan is just too big, it could move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do some fans require oil yet others do not? The Hunter Original carries a very unique motor that utilizes an oil-bath lubrication system. This system keeps the primary bearings lubricated always, for quiet operation and long-life. It is part with the reasons why this fan carries a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique within the market compared to all the other fans? The Hunter Original will be the most unique ceiling fan around the market, having a design that goes back towards the turn with the twentieth century. Cast iron is used within the motor housing construction to more effectively draw heat away from the electrical windings; heat is often a major enemy of electrical motors. The extra weight with the cast-iron construction also reduces the risk of fan wobble. The motor is also larger than every other ceiling fan, so that it is the best motor available. This allows the blades being pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components with the motor, and prolongs living with the motor. Added up, these unique design elements make a powerful, quiet fan that is certainly backed by the limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; this doesn’t lower the room temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It will be the feeling you obtain if you open of the question in a very moving car. If you use a ceiling fan in a very room whose temperature is 80 degrees, running the fan can cause a wind chill effect which makes you are feeling as if the temperature is 72 degrees. When utilized in conjunction having an air conditioning unit, a ceiling fan can lower energy costs, since you can set the thermostat of the air conditioning unit at the higher temperature.
Can the ceiling fan be used in the winter months for virtually any beneficial purpose? A ceiling fan will help lower energy consumption in the winter months by as much as 15%. The temperature with the air in a very heated room varies in layers; the air near the ceiling is warmer compared to air near the floor, because hot air rises. A ceiling fan will help push the warmer air that is certainly trapped near the ceiling down again into the room, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it really is needed, and also the home heating won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan ought to be run in a very clockwise direction. This pushes the air up against the ceilings and on the walls, to gently re-circulate the hot air without developing a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan are powered by high speed will consume less power when compared to a 100-watt bulb. How much can I expect you’ll save in heating and or cooling costs? A ceiling fan can conserve as much as 95% on cooling costs for the new install and 47% on an existing air-con system. It may also save as much as 15% on heating costs. Savings will change determined by energy rates. How easy is often a ceiling fan to setup? Most people are certain to get a mason to setup a ceiling fan, it could be a DIY project but please bear in mind you will need being able to: Locate a 2″ x 4″ or any other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is included by the fan warranty – how can the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for the stated life with the warranty; that is certainly, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is mostly covered for 1-year, as well as parts and labour for all the other components with the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with 115 many years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans could be adjusted having an accessory remote control sold separately from the fan. In fact, controllers will surely enhance the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible from the comfort of the favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with all the fan during new installations or on fans which has been previously installed and in use for quite a while. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands towards the fan as well as a receiver which either conceals inside fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away from the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans could be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest towards the ceiling which provides coverage for the electrical box) which has been built to accommodate sloped ceilings. Many quality fans will incorporate this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included with all the fan at original purchase, accessory canopy adapters are offered separately at stores. What length drop rod should I use with my fan? Will the fan be a little more susceptible to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for the dimension with the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod in order to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the risk of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a smaller clock pendulum having a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in a very ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by the certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that won’t make a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum simply because they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled from the same wall switch? The answer here is dependent upon how your wall switch happens to be wired. If you use a single wall switch with two wires (one black, one white), the answer is “no” if you do not purchase a control created specifically for this type of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up within the single wall switch and purchase a more common, dual control that may operate a fan and light-weight separately from one particular switch. Having a mason use a third wire could be expensive. What will be the difference in having a ceiling fan installed close towards the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet over the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to rate the fan at 8 feet (one foot have to be allowed for the distance from the top with the fan motor towards the switch housing bottom.