Sylvania 60 Watt A15 Fan Clarity Clear Candelabra Incandescent Light within proportions 1000 X 1000Ceiling Fan Light Bulb – Hunter ceiling fans are undoubtedly the very best you can get, have a look at have assembled every piece of information you need to understand ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers available who copy Hunter ceiling fan designs however they are nowhere close to good, the type of material they use are not as top quality and they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so while many ceiling fans may look “just being a Hunter,” remember all ceiling fans are not created equal. Most Hunter ceiling fans have a reverse option that’s particularly significant to relieve heating bills in the winter, hot air could be directed down to where it’s required spinning the ceiling fan clockwise. Some points to consider when buying a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is a comfort to no-one. One in the recommendations for proper air movement is blade pitch. The greater the pitch-the angle in the blade-the greater air movement providing the blade pitch has been properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and do not use large enough or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the worries on undersized or under-powered motors. Many fans likewise use extra thin blades to relieve cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, in addition they move almost no air, resulting in very inefficient fans, Hunter fans are created to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is truly the result of poor engineering design along with a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, though these are generally a common supply of operating noise. A deficiency of proper dampening between metal parts could also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that are not matched in carefully weighed and balanced sets could also wobble. Inconsistent blade wall mounts can make varying levels of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that may easily escape balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners could also bring about wobble. Hunter fans have a patented wobble free canopy which means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly placed on/off pull chains can be faulty and be pulled out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to showcase. Defective motor windings can bring about electrical shorts in the motor. Low quality fan bearings could possibly be “shielded” on one hand only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and brown spots commence to appear. You may even see the brass on the fan is a different colour compared to light kit you only added! Quality brass along with other metallic finishes include a compilation of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, prevent the fan. Can you really feel an easy protective coating? That’s a sign in the kind of quality you will find in the famous Hunter Bright Brass Finish.
What could be the minimum height I need during my room that will put up a follower? Safety standards claim that the min height through the floor for the bottom in the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make sure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that kind of record to square on. So you receive the peace of mind of knowing you have got the very best-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, greater air which is being moved. The air moved through the fan produces a wind chill effect which makes you really feel more at ease inside a warm room. There is a direct relationship between air movement and comfort – greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with a few additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag on the motor, slowing the RPM in the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are designed for optimal air delivery. How do I understand what size fan to buy – there are plenty of sizes available? You need to choose the right size fan for any room to get optimum looks, comfort as well as savings. If the fan is just too small for the room, it won’t move enough air to make you really feel comfortable. If the fan is just too big, it may move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do a little fans require oil yet others do not? The Hunter Original features a very unique motor that uses an oil-bath lubrication system. This system keeps the primary bearings lubricated at all times, for quiet operation and long-life. It is part in the reason this fan features a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique in the market compared to all the other fans? The Hunter Original could be the most unique ceiling fan on the market, using a design that goes for the turn in the last century. Cast iron is employed in the motor housing construction to better draw heat away through the electrical windings; heat is a major enemy of electrical motors. The extra weight in the cast-iron construction also reduces the prospect of fan wobble. The motor can also be larger than another ceiling fan, so that it is the best motor available. This allows the blades to be pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components in the motor, and prolongs lifespan in the motor. Added up, these unique design elements develop a powerful, quiet fan which is backed by a limited lifetime warranty.
How do fans cool the room – can they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it doesn’t lower the room temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you receive once you open of the question inside a moving car. If you have a ceiling fan inside a room whose temperature is 80 degrees, running the fan can make a wind chill effect which makes you really feel as though the temperature is 72 degrees. When used in conjunction with an air conditioning equipment, a ceiling fan can lower energy costs, because you can set the thermostat of one’s air conditioning equipment at a higher temperature.
Can the ceiling fan provide in the winter for any beneficial purpose? A ceiling fan will help lower energy consumption in the winter by as much as 15%. The temperature in the air inside a heated room varies in layers; air near the ceiling is warmer compared to air near the floor, because hot air rises. A ceiling fan will help push the warmer air which is trapped near the ceiling down again into the room, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it’s needed, as well as the heat does not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan needs to be run inside a clockwise direction. This pushes air up against the ceilings and down the walls, to softly re-circulate the hot air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan operate on very fast will consume less power than the usual 100-watt lamp. How much can I be prepared to save in heating and or cooling costs? A ceiling fan can save as much as 95% on cooling costs for any new install and 47% with an existing air cooling system. It could also save as much as 15% on heating costs. Savings will change determined by energy rates. How easy is a ceiling fan to install? Most people can get an electrical contractor to install a ceiling fan, it could be a DIY project but please bear in mind you will need to be able to: Locate a 2″ x 4″ or another suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is covered through the fan warranty – so how exactly does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for the stated life in the warranty; which is, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is usually covered for 1-year, just like parts and labour for all the other components in the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with more than 115 years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans could be adjusted with an accessory remote control sold separately through the fan. In fact, controllers really can boost the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either while using fan during new installations or on fans which were previously installed and in use for some time. The installation is a simple, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan along with a receiver which either conceals within the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away through the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans could be placed on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which has been built to accommodate sloped ceilings. Many quality fans includes this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included while using fan at original purchase, accessory canopy adapters can be purchased separately at retail outlets. What length drop rod should I use with my fan? Will the fan be more susceptible to wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for the dimension in the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the prospect of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a reduced clock pendulum using a fast, unsteady swing. Weight and length combine to generate stability, reducing wobble, whether it’s inside a ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that does not develop a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled through the same wall switch? The answer here depends on how your wall switch is now wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you don’t get a control created for this kind of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up in the single wall switch and get a more common, dual control that can operate a follower and light-weight separately from just one switch. Having an electrical contractor install a third wire could be expensive. What could be the difference in having a ceiling fan installed close for the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet higher than the floor. Extension drop rods are widely-used to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to rate the fan at 8 feet (one foot should be allowed for the distance through the top in the fan motor for the switch housing bottom.
