Large Blade Ceiling Fans – Hunter ceiling fans are unquestionably the best you can get, take a look at have assembled every piece of information you may want to understand about ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers available who copy Hunter ceiling fan designs but they are nowhere close to as good, the types of materials they use are certainly not as top quality plus they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so even though many ceiling fans may look “just like a Hunter,” remember all ceiling fans are certainly not built the same. Most Hunter ceiling fans have a reverse option that is especially important to relieve heating bills in the winter months, heated air can be directed as a result of where it’s needed by spinning the ceiling fan clockwise. Some points to think about when purchasing a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is often a comfort to no person. One with the recommendations for proper air movement is blade pitch. The greater the pitch-the angle with the blade-the more the air movement offering the blade pitch continues to be properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and do not use sufficient or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the load on undersized or under-powered motors. Many fans likewise use extra thin blades to relieve cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes plus the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, in addition they move almost no air, producing very inefficient fans, Hunter fans are made to shift a great deal of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the consequence of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, despite the fact that they are perhaps the most common source of operating noise. A lack of proper dampening between metal parts can also create and intensify noise, as can the usage of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that are certainly not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade mounting brackets can cause varying degrees of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get rid of balance, generating wobble from your very heart with the fan. Inexpensive mounting systems with pin fasteners can also give rise to wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly placed on/off pull chains could become faulty and become brought out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to promote. Defective motor windings can bring about electrical shorts inside the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are utilized to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and brown spots start to appear. You may even spot the brass for the fan is often a different colour than the light kit you simply added! Quality brass as well as other metallic finishes include a compilation of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, steer clear of the fan. Can you’re feeling an even protective coating? That’s a sign with the kind of quality you’ll find inside the famous Hunter Bright Brass Finish.
What may be the minimum height I need in my room to place up a fan? Safety standards declare that the min height from your floor towards the bottom with the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that kind of record to face on. So you have the peace of mind of knowing you have the best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the greater air which is being moved. The air moved with the fan generates a wind chill effect that makes you’re feeling convenient in a warm room. There is often a direct relationship between air movement and comfort – the greater air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with some additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag for the motor, reducing the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, focus on optimal air delivery. How do I determine what size fan to buy – there are numerous sizes available? You need to choose the right size fan for the room to obtain optimum looks, comfort and savings. If the fan is way too small for the room, it won’t move enough air to make you’re feeling comfortable. If the fan is way too big, it could move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do some fans require oil while others don’t? The Hunter Original features a very unique motor which uses an oil-bath lubrication system. This system keeps the primary bearings lubricated constantly, for quiet operation and long-life. It is part with the reasons why this fan features a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique inside the market when compared with all the fans? The Hunter Original may be the most unique ceiling fan for the market, with a design that goes back towards the turn with the twentieth century. Cast iron is employed inside the motor housing construction to more effectively draw heat away from your electrical windings; heat is often a major enemy of electrical motors. The extra weight with the cast-iron construction also decreases the possibility of fan wobble. The motor can also be bigger than any other ceiling fan, rendering it the strongest motor available. This allows the blades to become pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components with the motor, and prolongs living with the motor. Added up, these unique design elements create a powerful, quiet fan which is backed by way of a limited lifetime warranty.
How do fans cool the room – can they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it doesn’t lower the room temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration onto the skin. It may be the feeling you receive if you open your window in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can cause a wind chill effect that makes you’re feeling just as if the temperature is 72 degrees. When utilized in conjunction with the ac, a ceiling fan can lower energy costs, since you can set the thermostat of one’s ac with a higher temperature.
Can the ceiling fan provide in the winter months for any beneficial purpose? A ceiling fan will help lower energy consumption in the winter months by around 15%. The temperature with the air in a heated room varies in layers; the air nearby the ceiling is warmer than the air nearby the floor, because heated air rises. A ceiling fan will help push the warmer air which is trapped nearby the ceiling back off into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it’s needed, and also the heating system does not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan should be run in a clockwise direction. This pushes the air facing the ceilings and on the walls, to softly re-circulate the heated air without developing a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on high speed will consume less power than a 100-watt light bulb. How much can I anticipate to save in heating as well as cooling costs? A ceiling fan can conserve around 95% on cooling costs for the new install and 47% on an existing air cooling system. It can also save around 15% on heating costs. Savings will be different based on energy rates. How easy is often a ceiling fan to put in? Most people is certain to get an electrician to put in a ceiling fan, it can be a DIY project but please take into account you will need to become able to: Locate a 2″ x 4″ and other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is included with the fan warranty – how can the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for the stated life with the warranty; which is, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is usually covered for 1-year, as are parts and labour for all the components with the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 a lot of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans can be adjusted with the accessory remote control sold separately from your fan. In fact, remote controls will surely improve the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible from your comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight remote controls can easily be installed either using the fan during new installations or on fans which were previously installed along with use for quite a while. The installation is a simple, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands towards the fan as well as a receiver which either conceals within the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away from your fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans can be placed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest towards the ceiling which takes care of the electrical box) which continues to be made to accommodate sloped ceilings. Many quality fans will include such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included using the fan at original purchase, accessory canopy adapters are offered separately at shops. What length drop rod should I use with my fan? Will the fan become more vulnerable to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot for the dimension with the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod as a way to properly position the fan 8 feet from your floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the possibility of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a smaller clock pendulum with a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it’s in a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by way of a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that does not create a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum given that they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled from your same wall switch? The answer here is dependent upon how your wall switch is wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you don’t buy a control specifically designed for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and buy a more common, dual control that can operate a fan and light-weight separately from just one switch. Having an electrician put in a third wire can be expensive. What may be the difference in having a ceiling fan installed close towards the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet across the floor. Extension drop rods are utilized to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to position the fan at 8 feet (one foot should be allowed for the distance from your top with the fan motor towards the switch housing bottom.