Corner Ceiling Fans – Hunter ceiling fans are unquestionably the very best you should buy, take a look at have come up with every piece of information you might need to know about ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers around who copy Hunter ceiling fan designs however they are nowhere close to as good, the materials they use usually are not as top quality plus they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although ceiling fans may look “just as being a Hunter,” remember all ceiling fans usually are not made the same. Most Hunter ceiling fans have a very reverse option which can be particularly important to lessen heating bills in the winter, hot air might be directed right down to where it really is required by spinning the ceiling fan clockwise. Some points to consider when choosing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is really a comfort to nobody. One with the recommendations for proper air movement is blade pitch. The greater the pitch-the angle with the blade-the greater air movement providing the blade pitch may be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and do not use sufficient or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the load on undersized or under-powered motors. Many fans likewise use extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes as well as the amount of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move hardly any air, producing very inefficient fans, Hunter fans are designed to shift a great deal of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is truly the results of poor engineering design as well as a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, even though they’re perhaps the most common way to obtain operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that usually are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade supports can produce varying degrees of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get free from balance, generating wobble through the very heart with the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans have a very patented wobble free canopy which means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains can be faulty and turn into brought out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to market. Defective motor windings can cause electrical shorts inside the motor. Low quality fan bearings could be “shielded” on the one hand only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are utilized to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and liver spots begin to appear. You may even notice the brass around the fan is really a different colour compared to light kit you just added! Quality brass as well as other metallic finishes add a compilation of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, prevent the fan. Can you really feel an easy protective coating? That’s a sign with the kind of quality you will find inside the famous Hunter Bright Brass Finish.
What could be the minimum height I need inside my room to put up a follower? Safety standards claim that the min height through the floor for the bottom with the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really be sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that type of record to face on. So you get the reassurance of knowing you’ve got the very best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, greater air that is being moved. The air moved by the fan generates a wind chill effect which makes you really feel more at ease in a very warm room. There is really a direct relationship between air movement and comfort – greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag around the motor, reducing the RPM with the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are equipped for optimal air delivery. How do I understand what size fan to purchase – there are so many sizes available? You need to choose the best size fan for a room to acquire optimum looks, comfort and energy savings. If the fan is way too small to the room, it does not move enough air to make you really feel comfortable. If the fan is way too big, it may move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why do some fans require oil among others do not? The Hunter Original carries a very unique motor which uses an oil-bath lubrication system. This system keeps the main bearings lubricated always, for quiet operation and long-life. It is part with the good reason that this fan carries a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside the market in comparison to all the fans? The Hunter Original could be the most unique ceiling fan around the market, having a design that goes for the turn with the last century. Cast iron can be used inside the motor housing construction to more efficiently draw heat away through the electrical windings; heat is really a major enemy of electrical motors. The extra weight with the cast-iron construction also reduces the risk of fan wobble. The motor can be bigger than every other ceiling fan, so that it is the strongest motor available. This allows the blades to get pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components with the motor, and prolongs lifespan with the motor. Added up, these unique design elements develop a powerful, quiet fan that is backed with a limited lifetime warranty.
How do fans cool the space – can they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it doesn’t lower the space temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration onto the skin. It could be the feeling you obtain whenever you open your window in a very moving car. If you have a very ceiling fan in a very room whose temperature is 80 degrees, running the fan can produce a wind chill effect which makes you really feel as if the temperature is 72 degrees. When found in conjunction by having an air conditioning equipment, a ceiling fan can lower energy costs, because you can set the thermostat of the air conditioning equipment at a higher temperature.
Can the ceiling fan provide in the winter for virtually any beneficial purpose? A ceiling fan will help lower energy consumption in the winter by around 15%. The temperature with the air in a very heated room varies in layers; air near the ceiling is warmer compared to air near the floor, because hot air rises. A ceiling fan will help push the warmer air that is trapped near the ceiling back into the space, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it really is needed, as well as the home heating won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan ought to be run in a very clockwise direction. This pushes air up against the ceilings and along the walls, to carefully re-circulate the hot air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run using broadband will consume less power than the usual 100-watt lamp. How much can I expect to save in heating and or cooling costs? A ceiling fan can help to conserve around 95% on cooling costs for a new install and 47% on an existing air cooling system. It can also save around 15% on heating costs. Savings will change according to energy rates. How easy is really a ceiling fan to setup? Most people can get a mason to setup a ceiling fan, it might be a DIY project but please keep in mind you will need to get able to: Locate a 2″ x 4″ and other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is included by the fan warranty – how does the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts to the stated life with the warranty; that is, a 20-year warranty will handle the motor parts for 20 years. Labour to the motor is usually covered for 1-year, just like parts and labour for all the components with the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with more than 115 a lot of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans might be adjusted by having an accessory remote control sold separately through the fan. In fact, controllers can definitely boost the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible through the comfort of the favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either while using fan during new installations or on fans which has been previously installed and in use for some time. The installation is a simple, do-it-yourself project and won’t require any professional wiring. Remote control kits add a handheld transmitter for sending commands for the fan as well as a receiver which either conceals inside the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away through the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans might be set up on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which may be meant to accommodate sloped ceilings. Many quality fans includes this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included while using fan at original purchase, accessory canopy adapters are offered separately at retail stores. What length drop rod should I use with my fan? Will the fan become more susceptible to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot to the dimension with the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the risk of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a lesser clock pendulum having a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in a very ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated with a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that won’t develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum simply because they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled through the same wall switch? The answer here depends on how your wall switch happens to be wired. If you have a very single wall switch with two wires (one black, one white), the answer is “no” if you don’t buy a control specifically designed for this type of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up inside the single wall switch and buy a more common, dual control which will operate a follower and light-weight separately from an individual switch. Having a mason purchase a third wire might be expensive. What could be the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet over the floor. Extension drop rods are utilized to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed to the distance through the top with the fan motor for the switch housing bottom.