Sloped Ceiling Fan – Hunter ceiling fans are undoubtedly the top you can purchase, here we have put together every piece of information you need to learn about ceiling fans before purchasing, please please remember there are additional ceiling fan manufacturers around who copy Hunter ceiling fan designs but they are nowhere close to good, the type of material they normally use are certainly not as top quality and they also cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so although many ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not made the same. Most Hunter ceiling fans have a reverse option which is especially important to reduce heating bills in the winter months, warm air may be directed as a result of where it really is essental to spinning the ceiling fan clockwise. Some points to consider when selecting a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is often a comfort to nobody. One of the recommendations for proper air movement is blade pitch. The greater the pitch-the angle of the blade-the harder mid-air movement offering the blade pitch has become properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials , nor use large enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the worries on undersized or under-powered motors. Many fans also employ extra thin blades to reduce cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a lover consumes in addition to the number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, they also move very little air, causing very inefficient fans, Hunter fans are made to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is often the consequence of poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, even though they are a typical way to obtain operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade mounting brackets can make varying degrees of pitch (blade angle), throwing a lover into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get out of balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners may also help with wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly set up on/off pull chains can be faulty and stay got out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to market. Defective motor windings can cause electrical shorts within the motor. Low quality fan bearings could be “shielded” somewhere only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and brown spots commence to appear. You may even see the brass on the fan is often a different colour as opposed to light kit you just added! Quality brass as well as other metallic finishes incorporate a group of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, steer clear of the fan. Can you feel a smooth protective coating? That’s a sign of the kind of quality you can find within the famous Hunter Bright Brass Finish.
What is the minimum height I need inside my room that will put up a lover? Safety standards declare that the min height in the floor on the bottom of the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that sort of record to stand on. So you obtain the comfort of knowing you have the top-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the more air that is being moved. The air moved from the fan generates a wind chill effect that makes you feel more at ease in a very warm room. There is often a direct relationship between air movement and comfort – the more air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag on the motor, slowing the RPM of the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are prepared for optimal air delivery. How do I determine what size fan to purchase – there are many sizes available? You need to select the right size fan for the room to obtain optimum looks, comfort and energy savings. If the fan is way too small to the room, it won’t move enough air to make you feel comfortable. If the fan is way too big, it might move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why perform some fans require oil yet others usually do not? The Hunter Original includes a very unique motor which uses an oil-bath lubrication system. This system keeps the primary bearings lubricated all the time, for quiet operation and long-life. It is part of the good reason that this fan includes a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique within the market in comparison with other fans? The Hunter Original is the most unique ceiling fan on the market, with a design that extends back on the turn of the last century. Cast iron is employed within the motor housing construction to better draw heat away in the electrical windings; heat is often a major enemy of electrical motors. The extra weight of the cast-iron construction also decreases the possibility of fan wobble. The motor is additionally larger than every other ceiling fan, so that it is the strongest motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components of the motor, and prolongs the life of the motor. Added up, these unique design elements make a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the area – would they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it does not lower the area temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on your skin. It is the feeling you receive if you open of the question in a very moving car. If you have a ceiling fan in a very room whose temperature is 80 degrees, running the fan can make a wind chill effect that makes you feel just as if the temperature is 72 degrees. When utilized in conjunction with an air conditioning equipment, a ceiling fan can lower energy costs, because you can set the thermostat of the air conditioning equipment with a higher temperature.
Can the ceiling fan be utilized in the winter months for any beneficial purpose? A ceiling fan can help lower energy consumption in the winter months by around 15%. The temperature of the air in a very heated room varies in layers; mid-air nearby the ceiling is warmer as opposed to air nearby the floor, because warm air rises. A ceiling fan can help push the warmer air that is trapped nearby the ceiling back into the area, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it really is needed, as well as the furnace won’t overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan needs to be run in a very clockwise direction. This pushes mid-air facing the ceilings and around the walls, to gently re-circulate the warm air without setting up a cooling wind chill effect.
How much electricity will a lover use? On average, a ceiling fan operate on very fast will consume less power when compared to a 100-watt bulb. How much can I be prepared to save in heating as well as cooling costs? A ceiling fan can help to conserve around 95% on cooling costs for the new install and 47% on an existing air cooling system. It may also save around 15% on heating costs. Savings will vary based on energy rates. How easy is often a ceiling fan to put in? Most people is certain to get an electrician to put in a ceiling fan, it may be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ and other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is covered from the fan warranty – how does the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts to the stated life of the warranty; that is, a 20-year warranty covers the motor parts for 20 years. Labour to the motor is usually covered for 1-year, as are parts and labour for other components of the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company craigs list 115 years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans may be adjusted with an accessory handy remote control sold separately in the fan. In fact, remotes will surely boost the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible in the comfort of the favourite chair or bedside table. Ceiling fan and light-weight remotes can easily be installed either with the fan during new installations or on fans which were previously installed along with use for some time. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits incorporate a handheld transmitter for sending commands on the fan and a receiver which either conceals in the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away in the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans may be set up on angled or vaulted ceilings by using a lover canopy (the “cap” visible closest on the ceiling which takes care of the electrical box) which has become built to accommodate sloped ceilings. Many quality fans includes this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with the fan at original purchase, accessory canopy adapters are sold separately at stores. What length drop rod should I use with my fan? Will the fan be more prone to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot to the dimension of the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod so that you can properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the possibility of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a reduced clock pendulum with a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in a very ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that won’t make a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum given that they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan and a light kit be controlled in the same wall switch? The answer here depends on how your wall switch is wired. If you have a single wall switch with two wires (one black, one white), the answer is “no” unless you purchase a control specifically designed for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up within the single wall switch and purchase a more common, dual control that may operate a lover and light-weight separately from just one switch. Having an electrician purchase a third wire may be expensive. What is the difference in having a ceiling fan installed close on the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet above the floor. Extension drop rods are used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed to the distance in the top of the fan motor on the switch housing bottom.