Chic Ceiling Fan – Hunter ceiling fans are undoubtedly the very best you can buy, have a look at have build all the details you may want to know about ceiling fans before purchasing, please bear in mind that there are many ceiling fan manufacturers on the market who copy Hunter ceiling fan designs however they are nowhere close to good, the types of materials they normally use usually are not as good quality and they also cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty for the motor either, so although ceiling fans may look “just as being a Hunter,” remember all ceiling fans usually are not good quality. Most Hunter ceiling fans have a reverse option that’s especially important to lessen heating bills in the winter, warm air might be directed into where it really is required by spinning the ceiling fan clockwise. Some points to consider when purchasing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is really a comfort to no-one. One in the keys to proper air movement is blade pitch. The greater the pitch-the angle in the blade-the greater the air movement providing the blade pitch may be properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and use big enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the strain on undersized or under-powered motors. Many fans also use extra thin blades to lessen cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes plus the amount of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, but they also move almost no air, producing very inefficient fans, Hunter fans are built to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is usually the consequence of poor engineering design along with a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, despite the fact that they are perhaps the most common source of operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans only use the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can create varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get out of balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners may also give rise to wobble. Hunter fans have a patented wobble free canopy meaning Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains could become faulty and be pulled out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to promote. Defective motor windings can bring about electrical shorts inside the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and dark spots start to appear. You may even see the brass for the fan is really a different colour compared to the light kit you simply added! Quality brass and other metallic finishes will include a number of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, stay away from the fan. Can you are feeling an even protective coating? That’s a sign in the kind of quality you can find inside the famous Hunter Bright Brass Finish.
What may be the minimum height I need inside my room to put up an admirer? Safety standards state that the min height through the floor for the bottom in the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make sure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that sort of record to square on. So you obtain the peace of mind of knowing you have got the very best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the more air that is being moved. The air moved through the fan results in a wind chill effect that makes you are feeling more comfortable in the warm room. There is really a direct relationship between air movement and comfort – the more air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with some additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag for the motor, slowing the RPM in the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, are prepared for optimal air delivery. How do I know what size fan to acquire – there are plenty of sizes available? You need to choose the right size fan for the room to get optimum looks, comfort and energy savings. If the fan is too small to the room, it doesn’t move enough air to make you are feeling comfortable. If the fan is too big, it could possibly move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do some fans require oil yet others usually do not? The Hunter Original has a very unique motor that utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated all the time, for quiet operation and long-life. It is part in the reason this fan has a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique inside the market compared to all other fans? The Hunter Original may be the most unique ceiling fan for the market, which has a design that goes back for the turn in the 20th century. Cast iron is used inside the motor housing construction to more efficiently draw heat away through the electrical windings; heat is really a major enemy of electrical motors. The extra weight in the cast-iron construction also reduces the prospect of fan wobble. The motor is additionally greater than another ceiling fan, rendering it the most powerful motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components in the motor, and prolongs the life in the motor. Added up, these unique design elements develop a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the bedroom – can they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it does not lower the bedroom temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It may be the feeling you will get if you open of the question in the moving car. If you have a ceiling fan in the room whose temperature is 80 degrees, running the fan can create a wind chill effect that makes you are feeling as if the temperature is 72 degrees. When employed in conjunction by having an air conditioning unit, a ceiling fan can lower energy costs, because you can set the thermostat of one’s air conditioning unit with a higher temperature.
Can the ceiling fan be used in the winter for any beneficial purpose? A ceiling fan will help lower energy consumption in the winter by around 15%. The temperature in the air in the heated room varies in layers; the air near the ceiling is warmer compared to the air near the floor, because warm air rises. A ceiling fan will help push the warmer air that is trapped near the ceiling down again into the bedroom, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it really is needed, as well as the furnace does not overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan should be run in the clockwise direction. This pushes the air against the ceilings and down the walls, to softly re-circulate the warm air without developing a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan are powered by high speed will consume less power than a 100-watt bulb. How much can I anticipate to save in heating and or cooling costs? A ceiling fan can help to save around 95% on cooling costs for the new install and 47% with an existing ac system. It may also save around 15% on heating costs. Savings will vary depending on energy rates. How easy is really a ceiling fan to install? Most people will get an electrician to install a ceiling fan, it might be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ or any other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is covered through the fan warranty – what makes the Hunter warranty can rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts to the stated life in the warranty; that is, a 20-year warranty will take care of the motor parts for 20 years. Labour to the motor is normally covered for 1-year, much like parts and labour for all other components in the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans might be adjusted by having an accessory handheld remote control sold separately through the fan. In fact, remote controls can definitely boost the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible through the comfort of one’s favourite chair or bedside table. Ceiling fan and light remote controls can easily be installed either with all the fan during new installations or on fans which were previously installed and in use for some time. The installation is a simple, do-it-yourself project and does not require any professional wiring. Remote control kits will include a handheld transmitter for sending commands for the fan along with a receiver which either conceals within the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away through the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans might be set up on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest for the ceiling which provides coverage for the electrical box) which may be built to accommodate sloped ceilings. Many quality fans will include this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with all the fan at original purchase, accessory canopy adapters can be purchased separately at retail outlets. What length drop rod should I use with my fan? Will the fan be a little more vulnerable to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based for the fan-to-floor distance of 8 feet plus 1 foot to the dimension in the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod so that you can properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the prospect of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a smaller clock pendulum which has a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in the ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that does not develop a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum given that they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled through the same wall switch? The answer here is dependent upon how your wall switch is currently wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” until you buy a control specifically designed for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and buy a more common, dual control that can operate an admirer and light separately from one particular switch. Having an electrician install a third wire might be expensive. What may be the difference in having a ceiling fan installed close for the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet across the floor. Extension drop rods are widely-used to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot have to be allowed to the distance through the top in the fan motor for the switch housing bottom.