Small Kitchen Ceiling Fans – Two top reasons to use a ceiling fan, air conditioning. If you live in the cold climate, fans can push heated air gathered nearby the ceiling back down. Ceiling fans may be an easy task to install in case you have some mechanical aptitude. Current ceiling fans feature remote-controls to vary speed and adjust lighting. If your room already carries a light fixture within the ceiling, your light fixture probably has one hot or feed wire going to it, the neutral white as well as the bonding green or copper. Essentially this can be a three-wire system. Many new construction homes have four wires available, one to the light and something to the fan motor control as well as the neutral and ground. If you simply have one Hot wire feeding the ceiling junction box, the remote-control fans works with your application. Additionally some remote-controlled fans use wall controller which sends its signal on the fan being a TV remote. It just appears to be a wall control unit. If you really need the power wire to your remote-controlled fan, please cap over fourth wire which you will not need to work with. This needs to be shown within your directions that included the fan assembly.
Once you have acquired a fan you like, put it together according on the instructions given. Some fans can be a much more complex, ask a friend to aid if required. It is best to make sure it is assembled correctly, having a ceiling fan blade thud your self on your head may be annoying. Once you have the pre-assembly completed, it’s simple to prepare the ceiling junction box. Of course I know you have already made certain the power on the ceiling box is switched off with no one can energize it accidentally. Once you have carried this out, you need to find three wires within the J-box. A copper or green wire for bonding. A white wire to the neutral as well as a red or black wire to the power. If your junction box carries a fourth wire, this would be set up for the wall controlled fan switch that’s great and allows you to work with a non-remote wall controller. I should mention that some all fans feature a wall controllers designed as remotes so avoid being confused as these all help the singular feed within your ceiling junction box.
A word about weight, not yours but a thing regarding the size your fan. If you have a big fan as well as weighted near 12 pounds or maybe more, you will need a special junction box that could offer the additional weight. I would recommend i hear you ask someone who knows about these heavier fans if that’s what you really are going to install. Most fans are lighter and may be installed in most junction boxes without modifications.
Now let us get it up there, the fan that is certainly. Many fans feature a Hanger in the shape of a U. Install this hanger on your box, the screws needs to be 8/32 types. That means a size 8 diameter or gauge screw with 32 threads per inch. Once you have the hanger installed, pick up your fan motor devoid of the blades installed and place it for the hanger. This allows you the electrician to hook up the wires without struggling to juggle the motor and wire it as well. Connect the bonding wire on the chassis as noted within the instructions. Next connect the white neutral wire, now the black wire. Swing the fan into place using the parts provided. Some have brackets, some utilize a metal plate and some use preformed mounting bases. Use your instructions you may have a fan very quickly. Smaller fans might require you to definitely pre-assemble your blades before hanging the fan. I always found installing the motor first and after that installing the blades last is easier. It does require however, you to definitely work above your brain to have the blades attached.
Once you have the fan hanging, the blades installed and everything tightened it’s simple to step over ladder, breathe deeply, then install the wall controller as provided. These all vary in design but they all follow similar procedures. Remember, you will have a line and load situation here. This means, the queue side may be the pair of wires the feed to the switch box in the panel whilst the Load side is going to your fan. This is critical so ensure you comprehend the difference. Connect the Load side first: Connect your bonding wire first. Then connect your white neutral wire. Then your hot wire. Next perform the Line (incoming) side next: Bond or ground should already be made up on the new controller. Next wire your white neutral on the controllers neutral to the Line side. You may have already wired your neutrals together based on your instructions. Now wire your Hot or Power wire on the Line side of the controller. If you have the fourth wire in that room, cap it off or use it to the motor control and connect it accordingly for your directions. Red to Red is truly the case here. Once completed, get yourself some Iced Tea and revel in your fan.