Ceiling Tile Fan – Hunter ceiling fans are unquestionably the top you can buy, have a look at have put together all the details you need to understand ceiling fans before purchasing, please be aware that there are more ceiling fan manufacturers available who copy Hunter ceiling fan designs but they’re nowhere near as good, the type of material they will use usually are not as top quality plus they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty about the motor either, so even though many ceiling fans may look “just as being a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a very reverse option that’s especially important to relieve heating bills during the cold months, warm air may be directed as a result of where it is essental to spinning the ceiling fan clockwise. Some points to take into account when selecting a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is really a comfort to nobody. One in the recommendations for proper air movement is blade pitch. The greater the pitch-the angle in the blade-the more mid-air movement providing the blade pitch has been properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and do not use big enough or powerful enough motors to compliment proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the stress on undersized or under-powered motors. Many fans also use extra thin blades to relieve cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a lover consumes plus the number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, they also move very little air, leading to very inefficient fans, Hunter fans are created to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the response to poor engineering design plus a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, although these are a common method to obtain operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that usually are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade supports can create varying levels of pitch (blade angle), throwing a lover into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get free from balance, generating wobble from the very heart in the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans have a very patented wobble free canopy this means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly attached to/off pull chains may become faulty and become brought out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to showcase. Defective motor windings can result in electrical shorts in the motor. Low quality fan bearings could possibly be “shielded” somewhere only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and liver spots begin to appear. You may even see the brass about the fan is really a different colour than the light kit you simply added! Quality brass and also other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, steer clear of the fan. Can you feel an easy protective coating? That’s a sign in the kind of quality you will find in the famous Hunter Bright Brass Finish.
What is the minimum height I need in my room to place up a lover? Safety standards declare that the min height from the floor for the bottom in the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that kind of record to stand on. So you have the peace of mind of knowing you have got the top-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the harder air that is certainly being moved. The air moved with the fan generates a wind chill effect that creates you feel convenient in a warm room. There is really a direct relationship between air movement and comfort – the harder air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with a few additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag about the motor, slowing the RPM in the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are designed for optimal air delivery. How do I understand what size fan to purchase – there are plenty of sizes available? You need to select the right size fan to get a room to get optimum looks, comfort and energy savings. If the fan is way too small for the room, it doesn’t move enough air to make you feel comfortable. If the fan is way too big, it could possibly move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do some fans require oil and others don’t? The Hunter Original features a very unique motor which utilizes an oil-bath lubrication system. This system keeps the primary bearings lubricated constantly, for quiet operation and long-life. It is part in the good reason that this fan features a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique in the market compared to all the fans? The Hunter Original is the most unique ceiling fan about the market, using a design that goes for the turn in the last century. Cast iron is used in the motor housing construction to more effectively draw heat away from the electrical windings; heat is really a major enemy of electrical motors. The extra weight in the cast-iron construction also cuts down on risk of fan wobble. The motor is additionally greater than any other ceiling fan, so that it is the most powerful motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components in the motor, and prolongs the life in the motor. Added up, these unique design elements make a powerful, quiet fan that is certainly backed with a limited lifetime warranty.
How do fans cool the room – can they actually lower the temperature? A ceiling fan cools by making a wind chill effect; this doesn’t lower the room temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on the skin. It is the feeling you obtain when you open the window in a moving car. If you have a very ceiling fan in a room whose temperature is 80 degrees, running the fan can create a wind chill effect that creates you feel like the temperature is 72 degrees. When utilized in conjunction with the air conditioning unit, a ceiling fan can lower energy costs, since you can set the thermostat of one’s air conditioning unit with a higher temperature.
Can the ceiling fan be utilized during the cold months for just about any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by as much as 15%. The temperature in the air in a heated room varies in layers; mid-air near the ceiling is warmer than the air near the floor, because warm air rises. A ceiling fan may help push the warmer air that is certainly trapped near the ceiling back into the room, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it is needed, and also the heating system won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan should be run in a clockwise direction. This pushes mid-air up against the ceilings and around the walls, to softly re-circulate the warm air without making a cooling wind chill effect.
How much electricity will a lover use? On average, a ceiling fan run using high speed will consume less power compared to a 100-watt lamp. How much can I anticipate to save in heating and or cooling costs? A ceiling fan can help to conserve as much as 95% on cooling costs to get a new install and 47% by using an existing air cooling system. It can also save as much as 15% on heating costs. Savings will change based on energy rates. How easy is really a ceiling fan to put in? Most people is certain to get a mason to put in a ceiling fan, it may be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ or another suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included with the fan warranty – so how exactly does the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for the stated life in the warranty; that is certainly, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is generally covered for 1-year, as well as parts and labour for all the components in the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company with 115 many years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans may be adjusted with the accessory handy remote control sold separately from the fan. In fact, controllers really can enhance the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible from the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with the fan during new installations or on fans that have been previously installed and in use for quite a while. The installation is a straightforward, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan plus a receiver which either conceals inside fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away from the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans may be attached to angled or vaulted ceilings by using a lover canopy (the “cap” visible closest for the ceiling which provides coverage for the electrical box) which has been built to accommodate sloped ceilings. Many quality fans will incorporate this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included with the fan at original purchase, accessory canopy adapters are offered separately at retail stores. What length drop rod should I use with my fan? Will the fan be a little more prone to wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based about the fan-to-floor distance of 8 feet plus 1 foot for the dimension in the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod as a way to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the risk of wobble. Think of a grandfather clock pendulum as well as slow, heavy swing versus a reduced clock pendulum using a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it is in a ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated with a certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that won’t make a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum since they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan plus a light kit be controlled from the same wall switch? The answer here is dependent upon how your wall switch happens to be wired. If you have a very single wall switch with two wires (one black, one white), the reply is “no” until you purchase a control created for this kind of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up in the single wall switch and purchase a more common, dual control that may operate a lover and light-weight separately from just one switch. Having a mason purchase a third wire may be expensive. What is the difference in having a ceiling fan installed close for the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot has to be allowed for the distance from the top in the fan motor for the switch housing bottom.