Best Flush Mount Ceiling Fans – Hunter ceiling fans are undoubtedly the very best you can buy, here we have assembled all the details you may want to learn about ceiling fans before purchasing, please be aware that there are many ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but they are nowhere close to good, the materials they normally use are not as good quality and so they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although ceiling fans may look “just as being a Hunter,” remember all ceiling fans are not built the same. Most Hunter ceiling fans use a reverse option which is especially important to cut back heating bills in the winter, hot air may be directed right down to where it’s required spinning the ceiling fan clockwise. Some points to take into account when purchasing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is a comfort to no person. One in the secrets of proper air movement is blade pitch. The greater the pitch-the angle in the blade-the higher the air movement providing the blade pitch continues to be properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials , nor use sufficient or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the stress on undersized or under-powered motors. Many fans likewise use extra thin blades to cut back cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes together with number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, in addition they move little or no air, producing very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is truly the results of poor engineering design plus a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, though these are generally a common way to obtain operating noise. A deficiency of proper dampening between metal parts could also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that are not matched in carefully weighed and balanced sets could also wobble. Inconsistent blade mounting brackets can make varying degrees of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get out of balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners could also help with wobble. Hunter fans use a patented wobble free canopy meaning Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly placed on/off pull chains can become faulty and become pulled out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can lead to electrical shorts within the motor. Low quality fan bearings might be “shielded” on one side only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are utilized to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and liver spots begin to appear. You may even spot the brass around the fan is a different colour as opposed to light kit you just added! Quality brass along with other metallic finishes will include a number of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, steer clear of the fan. Can you’re feeling a smooth protective coating? That’s a sign in the kind of quality you will find within the famous Hunter Bright Brass Finish.
What could be the minimum height I need within my room to place up a follower? Safety standards claim that the min height through the floor on the bottom in the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really make sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that sort of record to stand on. So you get the comfort of knowing you have the very best-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the more air that is being moved. The air moved through the fan creates a wind chill effect that creates you’re feeling much more comfortable inside a warm room. There is a direct relationship between air movement and comfort – the more air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM in the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are prepared for optimal air delivery. How do I know very well what size fan to acquire – there are so many sizes available? You need to choose the right size fan for the room to get optimum looks, comfort and savings. If the fan is too small for the room, it won’t move enough air to make you’re feeling comfortable. If the fan is too big, it might move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do some fans require oil while others do not? The Hunter Original has a very unique motor that uses an oil-bath lubrication system. This system keeps the primary bearings lubricated all the time, for quiet operation and long-life. It is part in the good reason that this fan has a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique within the market in comparison to all the other fans? The Hunter Original could be the most unique ceiling fan around the market, which has a design that goes on the turn in the last century. Cast iron can be used within the motor housing construction to more effectively draw heat away through the electrical windings; heat is a major enemy of electrical motors. The extra weight in the cast-iron construction also decreases the potential for fan wobble. The motor is additionally bigger than another ceiling fan, so that it is the strongest motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components in the motor, and prolongs the life span in the motor. Added up, these unique design elements make a powerful, quiet fan that is backed by the limited lifetime warranty.
How do fans cool the space – do they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; it does not lower the space temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you get when you open your window inside a moving car. If you use a ceiling fan inside a room whose temperature is 80 degrees, running the fan can make a wind chill effect that creates you’re feeling as if the temperature is 72 degrees. When found in conjunction with the air conditioning equipment, a ceiling fan can lower energy costs, since you can set the thermostat of the air conditioning equipment with a higher temperature.
Can the ceiling fan provide in the winter for any beneficial purpose? A ceiling fan may help lower energy consumption in the winter by up to 15%. The temperature in the air inside a heated room varies in layers; the air at the ceiling is warmer as opposed to air at the floor, because hot air rises. A ceiling fan may help push the warmer air that is trapped at the ceiling back off into the space, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it’s needed, and the heating system will not overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan must be run inside a clockwise direction. This pushes the air against the ceilings and on the walls, to carefully re-circulate the hot air without creating a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan operate on very fast will consume less power compared to a 100-watt light bulb. How much can I expect to save in heating as well as cooling costs? A ceiling fan can help to save up to 95% on cooling costs for the new install and 47% with an existing air cooling system. It could also save up to 15% on heating costs. Savings will be different based on energy rates. How easy is a ceiling fan to put in? Most people is certain to get an electrical contractor to put in a ceiling fan, it may be a DIY project but please keep in mind you will need to get able to: Locate a 2″ x 4″ or another suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included through the fan warranty – how does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for the stated life in the warranty; that is, a 20-year warranty will handle the motor parts for 20 years. Labour for the motor is usually covered for 1-year, just like parts and labour for all the other components in the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with 115 many years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans may be adjusted with the accessory handy remote control sold separately through the fan. In fact, remote controls can definitely improve the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible through the comfort of the favourite chair or bedside table. Ceiling fan and light-weight remote controls can easily be installed either with all the fan during new installations or on fans that have been previously installed and in use for a long time. The installation is a simple, do-it-yourself project and will not require any professional wiring. Remote control kits will include a handheld transmitter for sending commands on the fan plus a receiver which either conceals within the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away through the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans may be placed on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest on the ceiling which takes care of the electrical box) which continues to be built to accommodate sloped ceilings. Many quality fans will include such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with all the fan at original purchase, accessory canopy adapters can be purchased separately at stores. What length drop rod should I use with my fan? Will the fan be more prone to wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for the dimension in the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the potential for wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a reduced clock pendulum which has a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it’s inside a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by the certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that will not make a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan plus a light kit be controlled through the same wall switch? The answer here depends upon how your wall switch is wired. If you use a single wall switch with two wires (one black, one white), the reply is “no” until you get a control created specifically for such a switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up within the single wall switch and get a more common, dual control that will operate a follower and light-weight separately from a single switch. Having an electrical contractor put in a third wire may be expensive. What could be the difference in having a ceiling fan installed close on the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet across the floor. Extension drop rods are utilized to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for the distance through the top in the fan motor on the switch housing bottom.