Bronze Flush Mount Ceiling Fan – Hunter ceiling fans are unquestionably the top you should buy, take a look at have build every piece of information you will need to learn about ceiling fans before purchasing, please keep in mind there are more ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but they are nowhere close to as good, materials they normally use usually are not as top quality plus they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so while many ceiling fans may look “just just like a Hunter,” remember all ceiling fans usually are not made the same. Most Hunter ceiling fans have a reverse option which can be especially important to relieve heating bills in winter, warm air might be directed into where it is required spinning the ceiling fan clockwise. Some points to think about when selecting a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is often a comfort to no-one. One in the recommendations for proper air movement is blade pitch. The greater the pitch-the angle in the blade-the higher air movement offering the blade pitch has been properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and don’t use just right or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the stress on undersized or under-powered motors. Many fans also use extra thin blades to relieve cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move very little air, resulting in very inefficient fans, Hunter fans are created to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the result of poor engineering design plus a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, although these are perhaps the most common supply of operating noise. A deficiency of proper dampening between metal parts could also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that usually are not matched in carefully weighed and balanced sets could also wobble. Inconsistent blade wall mounts can cause varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble from your very heart in the fan. Inexpensive mounting systems with pin fasteners could also help with wobble. Hunter fans have a patented wobble free canopy which means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly placed on/off pull chains may become faulty and become pulled out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to advertise. Defective motor windings can lead to electrical shorts inside the motor. Low quality fan bearings could be “shielded” somewhere only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots set out to appear. You may even notice the brass on the fan is often a different colour than the light kit you merely added! Quality brass along with other metallic finishes include a group of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, stay away from the fan. Can you are feeling a smooth protective coating? That’s a sign in the kind of quality you will find inside the famous Hunter Bright Brass Finish.
What may be the minimum height I need in my room to put up an admirer? Safety standards state that the min height from your floor for the bottom in the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that these are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that kind of record to square on. So you have the satisfaction of knowing you have the top-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the harder air that is being moved. The air moved through the fan results in a wind chill effect that makes you are feeling much more comfortable in a warm room. There is often a direct relationship between air movement and comfort – the harder air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag on the motor, scaling down the RPM in the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are prepared for optimal air delivery. How do I determine what size fan to acquire – there are numerous sizes available? You need to pick the best size fan for a room to have optimum looks, comfort and savings. If the fan is just too small for that room, it won’t move enough air to make you are feeling comfortable. If the fan is just too big, it may move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do some fans require oil while others don’t? The Hunter Original features a very unique motor which utilizes an oil-bath lubrication system. This system keeps the key bearings lubricated at all times, for quiet operation and long-life. It is part in the good reason that this fan features a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique inside the market compared to other fans? The Hunter Original may be the most unique ceiling fan on the market, with a design that goes back for the turn in the twentieth century. Cast iron is used inside the motor housing construction to more effectively draw heat away from your electrical windings; heat is often a major enemy of electrical motors. The extra weight in the cast-iron construction also cuts down on risk of fan wobble. The motor can be bigger than another ceiling fan, rendering it the strongest motor available. This allows the blades to get pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components in the motor, and prolongs the life in the motor. Added up, these unique design elements produce a powerful, quiet fan that is backed by way of a limited lifetime warranty.
How do fans cool the space – can they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; no lower the space temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration onto the skin. It may be the feeling you will get when you open your window in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can cause a wind chill effect that makes you are feeling like the temperature is 72 degrees. When employed in conjunction having an air conditioning unit, a ceiling fan can lower energy costs, since set the thermostat of your air conditioning unit with a higher temperature.
Can the ceiling fan be used in winter for just about any beneficial purpose? A ceiling fan can help lower energy consumption in winter by up to 15%. The temperature in the air in a heated room varies in layers; air close to the ceiling is warmer than the air close to the floor, because warm air rises. A ceiling fan can help push the warmer air that is trapped close to the ceiling back off into the space, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it is needed, along with the furnace won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan ought to be run in a clockwise direction. This pushes air facing the ceilings and along the walls, to softly re-circulate the warm air without setting up a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan run using very fast will consume less power than the usual 100-watt light bulb. How much can I expect to save in heating as well as cooling costs? A ceiling fan can help to conserve up to 95% on cooling costs for a new install and 47% on an existing air conditioning system. It could also save up to 15% on heating costs. Savings will change determined by energy rates. How easy is often a ceiling fan to set up? Most people will get an electrical contractor to set up a ceiling fan, it might be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ and other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is roofed through the fan warranty – what makes the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for that stated life in the warranty; that is, a 20-year warranty will handle the motor parts for 20 years. Labour for that motor is normally covered for 1-year, as well as parts and labour for other components in the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company craigs list 115 many years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans might be adjusted having an accessory remote device sold separately from your fan. In fact, remotes will surely enhance the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible from your comfort of your favourite chair or bedside table. Ceiling fan and lightweight remotes can easily be installed either with the fan during new installations or on fans which have been previously installed along with use for quite a while. The installation is a straightforward, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan plus a receiver which either conceals in the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away from your fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans might be placed on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest for the ceiling which provides coverage for the electrical box) which has been built to accommodate sloped ceilings. Many quality fans will include this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included with the fan at original purchase, accessory canopy adapters are sold separately at shops. What length drop rod should I use with my fan? Will the fan become more prone to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for that dimension in the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod so that you can properly position the fan 8 feet from your floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the risk of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus an inferior clock pendulum with a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it is in a ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by way of a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that won’t produce a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum simply because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled from your same wall switch? The answer here depends upon how your wall switch is wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you don’t obtain a control created for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and obtain a more common, dual control that will operate an admirer and lightweight separately from just one switch. Having an electrical contractor put in a third wire might be expensive. What may be the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet higher than the floor. Extension drop rods are used to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to position the fan at 8 feet (one foot should be allowed for that distance from your top in the fan motor for the switch housing bottom.