Ceiling Fan Light Socket – Hunter ceiling fans are without doubt the best you can buy, ideas have come up with all the information you might need to understand about ceiling fans before purchasing, please keep in mind there are many ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but they are nowhere near as good, the materials they’ll use are not as high quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just like a Hunter,” remember all ceiling fans are not made the same. Most Hunter ceiling fans possess a reverse option which is particularly significant to cut back heating bills during the cold months, hot air might be directed into where it can be required spinning the ceiling fan clockwise. Some points to consider when purchasing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air can be a comfort to no one. One of the secrets to proper air movement is blade pitch. The greater the pitch-the angle of the blade-the higher the environment movement providing the blade pitch continues to be properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and do not use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the strain on undersized or under-powered motors. Many fans also use extra thin blades to cut back cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes as well as the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, they also move hardly any air, producing very inefficient fans, Hunter fans are designed to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is often the response to poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, despite the fact that these are generally a typical supply of operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade wall mounts can cause varying examples of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get rid of balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners can also bring about wobble. Hunter fans possess a patented wobble free canopy which means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are not specified and matched correctly. Improperly placed on/off pull chains could become faulty and turn into pulled out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to advertise. Defective motor windings can result in electrical shorts inside motor. Low quality fan bearings may be “shielded” on one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots start to appear. You may even see the brass around the fan can be a different colour as opposed to light kit you only added! Quality brass along with other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, prevent the fan. Can you really feel an even protective coating? That’s a sign of the kind of quality you’ll find inside famous Hunter Bright Brass Finish.
What is the minimum height I need during my room that will put up a follower? Safety standards claim that the min height in the floor for the bottom of the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you possess a low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that sort of record to stand on. So you obtain the reassurance of knowing you may have the best-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the more air which is being moved. The air moved through the fan produces a wind chill effect which makes you really feel more comfortable inside a warm room. There can be a direct relationship between air movement and comfort – the more air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM of the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are prepared for optimal air delivery. How do I know very well what size fan to acquire – there are numerous sizes available? You need to choose the best size fan for the room to obtain optimum looks, comfort and energy savings. If the fan is just too small for the room, it does not move enough air to make you really feel comfortable. If the fan is just too big, it could possibly move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why perform some fans require oil and others do not? The Hunter Original includes a very unique motor which uses an oil-bath lubrication system. This system keeps the primary bearings lubricated always, for quiet operation and long-life. It is part of the reason why this fan includes a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside market in comparison to other fans? The Hunter Original is the most unique ceiling fan around the market, having a design that goes for the turn of the last century. Cast iron is employed inside motor housing construction to more efficiently draw heat away in the electrical windings; heat can be a major enemy of electrical motors. The extra weight of the cast-iron construction also cuts down on the risk of fan wobble. The motor is additionally larger than some other ceiling fan, rendering it the best motor available. This allows the blades to get pitched in a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components of the motor, and prolongs lifespan of the motor. Added up, these unique design elements develop a powerful, quiet fan which is backed with a limited lifetime warranty.
How do fans cool the space – would they actually lower the temperature? A ceiling fan cools by making a wind chill effect; it doesn’t lower the space temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on your skin. It is the feeling you obtain whenever you open your window inside a moving car. If you possess a ceiling fan inside a room whose temperature is 80 degrees, running the fan can cause a wind chill effect which makes you really feel as if the temperature is 72 degrees. When employed in conjunction by having an air conditioner, a ceiling fan can lower energy costs, since you can set the thermostat of one’s air conditioner in a higher temperature.
Can the ceiling fan be used during the cold months for any beneficial purpose? A ceiling fan might help lower energy consumption during the cold months by around 15%. The temperature of the air inside a heated room varies in layers; the environment nearby the ceiling is warmer as opposed to air nearby the floor, because hot air rises. A ceiling fan might help push the warmer air which is trapped nearby the ceiling down again into the space, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it can be needed, along with the heat won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan ought to be run inside a clockwise direction. This pushes the environment facing the ceilings and around the walls, to softly re-circulate the hot air without making a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan are powered by very fast will consume less power when compared to a 100-watt bulb. How much can I be prepared to save in heating as well as cooling costs? A ceiling fan can help to conserve around 95% on cooling costs for the new install and 47% while on an existing air-con system. It can also save around 15% on heating costs. Savings vary based on energy rates. How easy can be a ceiling fan to set up? Most people can get a mason to set up a ceiling fan, it might be a DIY project but please bear in mind you will need to get able to: Locate a 2″ x 4″ and other suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is included through the fan warranty – how can the Hunter warranty can rival other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for the stated life of the warranty; which is, a 20-year warranty will cover the motor parts for 20 years. Labour for the motor is mostly covered for 1-year, much like parts and labour for other components of the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company with more than 115 numerous years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans might be adjusted by having an accessory remote control sold separately in the fan. In fact, remote controls can really improve the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible in the comfort of one’s favourite chair or bedside table. Ceiling fan and lightweight remote controls can easily be installed either using the fan during new installations or on fans which have been previously installed and in use for quite a while. The installation is a straightforward, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan and a receiver which either conceals inside fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away in the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans might be placed on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which continues to be meant to accommodate sloped ceilings. Many quality fans should include this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included using the fan at original purchase, accessory canopy adapters can be bought separately at retail outlets. What length drop rod should I use with my fan? Will the fan be prone to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for the dimension of the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the risk of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus an inferior clock pendulum having a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it can be inside a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated with a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that won’t develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum given that they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled in the same wall switch? The answer here is dependent upon how your wall switch happens to be wired. If you possess a single wall switch with two wires (one black, one white), the solution is “no” until you get a control created specifically for this kind of switch (Hunter offers three models). The answer is “yes” if you possess a three wire set-up inside single wall switch and get a more common, dual control that may operate a follower and lightweight separately from just one switch. Having a mason put in a third wire might be expensive. What is the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet over the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to rate the fan at 8 feet (one foot has to be allowed for the distance in the top of the fan motor for the switch housing bottom.