24 Ceiling Fan – Hunter ceiling fans are without doubt the most effective you should buy, have a look at have assembled all the information you might need to understand about ceiling fans before purchasing, please please remember there are additional ceiling fan manufacturers out there who copy Hunter ceiling fan designs however they are nowhere close to good, the types of materials they will use are certainly not as top quality plus they cannot copy hunter ceiling fans patents for example whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so while many ceiling fans may look “just like a Hunter,” remember all ceiling fans are certainly not good quality. Most Hunter ceiling fans use a reverse option that is particularly significant to lessen heating bills in the winter, heated air can be directed as a result of where it can be required spinning the ceiling fan clockwise. Some points to think about when purchasing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is really a comfort to no-one. One of the recommendations for proper air movement is blade pitch. The greater the pitch-the angle of the blade-the harder the environment movement supplying the blade pitch may be properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and use large enough or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the load on undersized or under-powered motors. Many fans also use extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may also use little energy, in addition they move hardly any air, resulting in very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the results of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, even though these are generally a standard way to obtain operating noise. A lack of proper dampening between metal parts can also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans just use the most effective materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade wall mounts can produce varying degrees of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that can easily escape balance, generating wobble from the very heart of the fan. Inexpensive mounting systems with pin fasteners can also bring about wobble. Hunter fans use a patented wobble free canopy this means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly installed on/off pull chains can become faulty and turn into removed of the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to advertise. Defective motor windings can result in electrical shorts in the motor. Low quality fan bearings could possibly be “shielded” somewhere only, allowing dust to enter and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look great. Then tarnish and dark spots commence to appear. You may even notice the brass around the fan is really a different colour as opposed to light kit you just added! Quality brass and also other metallic finishes will include a group of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, steer clear of the fan. Can you’re feeling a smooth protective coating? That’s a sign of the kind of quality you will find in the famous Hunter Bright Brass Finish.
What may be the minimum height I need inside my room that will put up a follower? Safety standards declare that the min height from the floor to the bottom of the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really be sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that kind of record to face on. So you get the comfort of knowing you may have the most effective-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the greater air that is certainly being moved. The air moved through the fan creates a wind chill effect that makes you’re feeling much more comfortable inside a warm room. There is really a direct relationship between air movement and comfort – the greater air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with some additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM of the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are equipped for optimal air delivery. How do I determine what size fan to acquire – there are so many sizes available? You need to pick the best size fan to get a room to obtain optimum looks, comfort as well as savings. If the fan is too small for that room, it does not move enough air to make you’re feeling comfortable. If the fan is too big, it could move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why do some fans require oil while others do not? The Hunter Original features a very unique motor which uses an oil-bath lubrication system. This system keeps the key bearings lubricated always, for quiet operation and long-life. It is part of the good reason that this fan features a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique in the market in comparison with all other fans? The Hunter Original may be the most unique ceiling fan around the market, which has a design that extends back to the turn of the 20th century. Cast iron can be used in the motor housing construction to more efficiently draw heat away from the electrical windings; heat is really a major enemy of electrical motors. The extra weight of the cast-iron construction also cuts down on potential for fan wobble. The motor can also be larger than another ceiling fan, which makes it the strongest motor available. This allows the blades to get pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components of the motor, and prolongs living of the motor. Added up, these unique design elements produce a powerful, quiet fan that is certainly backed by a limited lifetime warranty.
How do fans cool the area – will they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it does not lower the area temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on the skin. It may be the feeling you obtain whenever you open the window inside a moving car. If you use a ceiling fan inside a room whose temperature is 80 degrees, running the fan can produce a wind chill effect that makes you’re feeling as though the temperature is 72 degrees. When employed in conjunction with the ac, a ceiling fan can lower energy costs, since set the thermostat of your ac at the higher temperature.
Can the ceiling fan provide in the winter for virtually any beneficial purpose? A ceiling fan will help lower energy consumption in the winter by around 15%. The temperature of the air inside a heated room varies in layers; the environment at the ceiling is warmer as opposed to air at the floor, because heated air rises. A ceiling fan will help push the warmer air that is certainly trapped at the ceiling back into the area, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it can be needed, and the furnace will not overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan ought to be run inside a clockwise direction. This pushes the environment up against the ceilings and on the walls, to carefully re-circulate the heated air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run on very fast will consume less power when compared to a 100-watt lamp. How much can I expect to save in heating as well as cooling costs? A ceiling fan can help to conserve around 95% on cooling costs to get a new install and 47% on an existing ac system. It can also save around 15% on heating costs. Savings will be different determined by energy rates. How easy is really a ceiling fan to setup? Most people are certain to get an electrician to setup a ceiling fan, it can be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ or another suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is included through the fan warranty – what makes the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for that stated life of the warranty; that is certainly, a 20-year warranty covers the motor parts for 20 years. Labour for that motor is usually covered for 1-year, much like parts and labour for all other components of the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 numerous years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans can be adjusted with the accessory handheld remote control sold separately from the fan. In fact, remotes can really improve the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible from the comfort of your favourite chair or bedside table. Ceiling fan and lightweight remotes can easily be installed either with all the fan during new installations or on fans that have been previously installed and in use for a long time. The installation is a straightforward, do-it-yourself project and will not require any professional wiring. Remote control kits will include a handheld transmitter for sending commands to the fan as well as a receiver which either conceals inside fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away from the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans can be installed on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest to the ceiling which provides coverage for the electrical box) which may be meant to accommodate sloped ceilings. Many quality fans will incorporate this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included with all the fan at original purchase, accessory canopy adapters can be bought separately at retail stores. What length drop rod should I use with my fan? Will the fan be prone to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for that dimension of the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the potential for wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a smaller clock pendulum which has a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it can be inside a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that will not produce a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are suitable for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled from the same wall switch? The answer here is dependent upon how your wall switch is wired. If you use a single wall switch with two wires (one black, one white), the answer then is “no” until you obtain a control created specifically for this type of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up in the single wall switch and obtain a more common, dual control that may operate a follower and lightweight separately from just one switch. Having an electrician use a third wire can be expensive. What may be the difference in having a ceiling fan installed close to the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet over the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to put the fan at 8 feet (one foot have to be allowed for that distance from the top of the fan motor to the switch housing bottom.