Brushed Nickel Ceiling Fan – Hunter ceiling fans are undoubtedly the top you can get, have a look at have assembled all the details you need to learn about ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers out there who copy Hunter ceiling fan designs but you are nowhere close to good, the materials they normally use are certainly not as excellent and so they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so even though many ceiling fans may look “just being a Hunter,” remember all ceiling fans are certainly not built the same. Most Hunter ceiling fans possess a reverse option that’s especially important to lessen heating bills during the cold months, heated air can be directed into where it can be needed by spinning the ceiling fan clockwise. Some points to take into consideration when choosing a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air can be a comfort to nobody. One with the secrets of proper air movement is blade pitch. The greater the pitch-the angle with the blade-the more mid-air movement providing the blade pitch may be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and use just right or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the worries on undersized or under-powered motors. Many fans also employ extra thin blades to lessen cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes as well as the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, in addition they move very little air, producing very inefficient fans, Hunter fans are designed to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is usually the response to poor engineering design as well as a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, despite the fact that they are a common way to obtain operating noise. A not enough proper dampening between metal parts could also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans just use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets could also wobble. Inconsistent blade supports can cause varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that could easily escape balance, generating wobble through the very heart with the fan. Inexpensive mounting systems with pin fasteners could also help with wobble. Hunter fans possess a patented wobble free canopy meaning Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly placed on/off pull chains can be faulty and become pulled out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to market. Defective motor windings can result in electrical shorts inside motor. Low quality fan bearings could be “shielded” on the one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and liver spots commence to appear. You may even see the brass on the fan can be a different colour than the light kit you merely added! Quality brass along with other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, prevent the fan. Can you’re feeling an even protective coating? That’s a sign with the kind of quality you will find inside famous Hunter Bright Brass Finish.
What may be the minimum height I need within my room to put up a fan? Safety standards declare that the min height through the floor to the bottom with the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you possess a low ceiling, just really make sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans using a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that kind of record to face on. So you have the comfort of knowing you’ve got the top-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, greater air which is being moved. The air moved through the fan results in a wind chill effect that makes you’re feeling much more comfortable in a warm room. There can be a direct relationship between air movement and comfort – greater air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with a few additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag on the motor, slowing down the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are designed for optimal air delivery. How do I determine what size fan to buy – there are numerous sizes available? You need to pick the best size fan for the room to acquire optimum looks, comfort and savings. If the fan is too small to the room, it won’t move enough air to make you’re feeling comfortable. If the fan is too big, it could move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do a little fans require oil among others usually do not? The Hunter Original features a very unique motor that uses an oil-bath lubrication system. This system keeps the main bearings lubricated at all times, for quiet operation and long-life. It is part with the reason this fan features a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique inside market in comparison to all other fans? The Hunter Original may be the most unique ceiling fan on the market, using a design that goes to the turn with the 20th century. Cast iron can be used inside motor housing construction to more effectively draw heat away through the electrical windings; heat can be a major enemy of electrical motors. The extra weight with the cast-iron construction also decreases the prospect of fan wobble. The motor is additionally greater than some other ceiling fan, which makes it the strongest motor available. This allows the blades being pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the main moving components with the motor, and prolongs the life with the motor. Added up, these unique design elements produce a powerful, quiet fan which is backed with a limited lifetime warranty.
How do fans cool the space – will they actually lower the temperature? A ceiling fan cools by making a wind chill effect; this doesn’t lower the space temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on the skin. It may be the feeling you receive when you open the window in a moving car. If you possess a ceiling fan in a room whose temperature is 80 degrees, running the fan can cause a wind chill effect that makes you’re feeling like the temperature is 72 degrees. When utilized in conjunction with an air conditioning equipment, a ceiling fan can lower energy costs, since set the thermostat of the air conditioning equipment at a higher temperature.
Can the ceiling fan provide during the cold months for virtually any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by around 15%. The temperature with the air in a heated room varies in layers; mid-air close to the ceiling is warmer than the air close to the floor, because heated air rises. A ceiling fan may help push the warmer air which is trapped close to the ceiling down again into the space, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it can be needed, along with the heating system does not overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan should be run in a clockwise direction. This pushes mid-air against the ceilings and along the walls, to carefully re-circulate the heated air without making a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on very fast will consume less power than the usual 100-watt lamp. How much can I be prepared to save in heating as well as cooling costs? A ceiling fan can help to conserve around 95% on cooling costs for the new install and 47% while on an existing air-con system. It could also save around 15% on heating costs. Savings will be different based on energy rates. How easy can be a ceiling fan to install? Most people can get a mason to install a ceiling fan, it can be a DIY project but please keep in mind you will need being able to: Locate a 2″ x 4″ or another suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is covered through the fan warranty – what makes the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that cover the motor parts to the stated life with the warranty; which is, a 20-year warranty will take care of the motor parts for 20 years. Labour to the motor is normally covered for 1-year, just like parts and labour for all other components with the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 many years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans can be adjusted with an accessory remote device sold separately through the fan. In fact, remote controls really can boost the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible through the comfort of the favourite chair or bedside table. Ceiling fan and lightweight remote controls can easily be installed either while using fan during new installations or on fans which has been previously installed plus use for quite a while. The installation is an easy, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands to the fan as well as a receiver which either conceals in the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away through the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans can be placed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which takes care of the electrical box) which may be designed to accommodate sloped ceilings. Many quality fans includes this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included while using fan at original purchase, accessory canopy adapters are offered separately at retail stores. What length drop rod should I use with my fan? Will the fan be prone to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot to the dimension with the fan. So if your ceiling height is 12 feet, you need a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the prospect of wobble. Think of a grandfather clock pendulum as well as slow, heavy swing versus a reduced clock pendulum using a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it can be in a ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated with a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that does not produce a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum given that they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled through the same wall switch? The answer here depends on how your wall switch happens to be wired. If you possess a single wall switch with two wires (one black, one white), the solution is “no” until you get a control specifically designed for this kind of switch (Hunter offers three models). The answer is “yes” if you possess a three wire set-up inside single wall switch and get a more common, dual control which will operate a fan and lightweight separately from an individual switch. Having a mason use a third wire can be expensive. What may be the difference in having a ceiling fan installed close to the ceiling versus on a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet across the floor. Extension drop rods are widely-used to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to put the fan at 8 feet (one foot has to be allowed to the distance through the top with the fan motor to the switch housing bottom.