Brass Ceiling Fan

Posted on

Westinghouse Casanova Supreme 42 In Polished Brass Ceiling Fan regarding dimensions 1000 X 1000Westinghouse Casanova Supreme 42 In Polished Brass Ceiling Fan regarding dimensions 1000 X 1000


Brass Ceiling Fan – Two top reasons to install a ceiling fan, air conditioning. If you live in the cold climate, fans can push warm air gathered nearby the ceiling down again. Ceiling fans might be an easy task to install if you have some mechanical aptitude. Current ceiling fans feature remote-controls to vary speed and adjust lighting. If your room already includes a fitting inside the ceiling, your fitting probably has one hot or feed wire likely to it, the neutral white and also the bonding green or copper. Essentially this is the three-wire system. Many new construction homes have four wires available, one to the light and something to the fan motor control and also the neutral and ground. If you have only one Hot wire feeding the ceiling junction box, the remote-control fans works with your application. Additionally some remote-controlled fans use wall controller which sends its signal on the fan just like a TV remote. It just looks like a wall control unit. If you really need the power wire on your remote-controlled fan, please cap off of the fourth wire which you will n’t need to make use of. This should be shown with your directions that came with the fan assembly.

Once you’ve got acquired a fan that suits you, assemble it according on the instructions given. Some fans can be a extra complex, ask a buddy to help you if required. It is best to help it become assembled correctly, using a ceiling fan blade thud yourself on the head might be annoying. Once you’ve got the pre-assembly completed, now you can prepare the ceiling junction box. Of course I know you’ve got already made sure the power on the ceiling box is powered down no you can energize it accidentally. Once you’ve got succeeded in doing so, you ought to find three wires inside the J-box. A copper or green wire for bonding. A white wire to the neutral as well as a red or black wire to the power. If your junction box includes a fourth wire, this may be setup for a wall controlled fan switch which can be great and allows you to make use of a non-remote wall controller. I should mention that some all fans feature a wall controllers designed as remotes so avoid being confused because they all work with the singular feed with your ceiling junction box.

A word about weight, not yours but a word regarding the size of your fan. If you’ve got a big fan and its weighted near 12 pounds or higher, you will need a special junction box that could offer the additional weight. I would recommend you may ask somebody that knows about these heavier fans if that is what you’re likely to install. Most fans are lighter and might be placed in most junction boxes without modifications.


Now let us get it there, the fan that is certainly. Many fans feature a Hanger the same shape as a U. Install this hanger on your box, the screws should be 8/32 types. That means a size 8 diameter or gauge screw with 32 threads per inch. Once you’ve got the hanger installed, get your fan motor minus the blades installed and hang it around the hanger. This allows you the electrician to attach the wires without struggling to juggle the motor and wire it simultaneously. Connect the bonding wire on the chassis as noted inside the instructions. Next connect the white neutral wire, and today the black wire. Swing the fan into place using the parts provided. Some have brackets, some make use of a metal plate while others use preformed mounting bases. Use your instructions and you’ll have a fan very quickly. Smaller fans may require one to pre-assemble your blades before hanging the fan. I always found installing the motor first and then installing the blades last is much easier. It does require however, one to work above your face to have the blades attached.

Once you’ve got the fan hanging, the blades installed and everything tightened now you can step off of the ladder, take a deep breath, then install the wall controller as provided. These all vary in design nonetheless they all follow similar procedures. Remember, you will have a line and load situation here. This means, the line side may be the set of wires the feed in to the switch box through the panel as the Load side is likely to your fan. This is critical so make sure you see the difference. Connect the Load side first: Connect your bonding wire first. Then connect your white neutral wire. Then your hot wire. Next do the Line (incoming) side next: Bond or ground should already be composed on the new controller. Next wire your white neutral on the controllers neutral to the Line side. You may have already wired your neutrals together based on your instructions. Now wire your Hot or Power wire on the Line side of your respective controller. If you’ve got the fourth wire inside, cap it well or use it to the motor control and connect it accordingly for your directions. Red to Red is truly the case here. Once completed, get yourself some Iced Tea and luxuriate in your new fan.