Small Ceiling Fans Without Lights

Posted on

Hunter Cassius 52 In Indooroutdoor Matte Silver Ceiling Fan 59262 throughout size 1000 X 1000Hunter Cassius 52 In Indooroutdoor Matte Silver Ceiling Fan 59262 throughout size 1000 X 1000


Small Ceiling Fans Without Lights – Two good reasons to put in a ceiling fan, air conditioning. If you live in a very cold climate, fans can push hot air gathered nearby the ceiling down again. Ceiling fans could be all to easy to install in case you have some mechanical aptitude. Current ceiling fans have remote-controls to vary speed and adjust lighting. If your room already has a light fixture inside the ceiling, your light fixture probably has one hot or feed wire planning to it, the neutral white along with the bonding green or copper. Essentially this can be a three-wire system. Many new construction homes have four wires available, one for that light then one for that fan motor control along with the neutral and ground. If you have only one Hot wire feeding the ceiling junction box, the remote-control fans works with your application. Additionally some remote-controlled fans use wall controller which sends its signal towards the fan like a TV remote. It just looks like a wall control unit. If you just have the energy wire for the remote-controlled fan, please cap from the fourth wire which you will not want to work with. This must be shown in your directions that came with the fan assembly.

Once you’ve got acquired a fan you prefer, assemble it according towards the instructions given. Some fans really are a extra complex, ask an associate to help if you need to. It is best to make sure it is assembled correctly, creating a ceiling fan blade thud you on your head could be annoying. Once you’ve got the pre-assembly completed, you can now prepare the ceiling junction box. Of course I know you’ve got already made certain the energy towards the ceiling box is powered down no one can energize it accidentally. Once you’ve got succeeded in doing so, you must find three wires inside the J-box. A copper or green wire for bonding. A white wire for that neutral and a red or black wire for that power. If your junction box has a fourth wire, this may be setup to get a wall controlled fan switch which is great and allows you to work with a non-remote wall controller. I should mention that some all fans have a wall controllers designed as remotes so avoid being confused as these all help the singular feed in your ceiling junction box.

A word about weight, not yours but a thing about the height and width of your fan. If you’ve got a large fan and its weighted near 12 pounds or maybe more, you might need a special junction box that will support the additional weight. I would recommend i hear you ask someone that knows about these heavier fans if that’s what you are planning to install. Most fans are lighter and could be installed in most junction boxes without modifications.


Now let’s get it up there, the fan that is certainly. Many fans have a Hanger the same shape as a U. Install this hanger on your box, the screws must be 8/32 types. That means a size 8 diameter or gauge screw with 32 threads per inch. Once you’ve got the hanger installed, pick up your fan motor minus the blades installed and it on the hanger. This allows you the electrician to connect the wires without struggling to juggle the motor and wire it as well. Connect the bonding wire towards the chassis as noted inside the instructions. Next connect the white neutral wire, now the black wire. Swing the fan into place while using parts provided. Some have brackets, some utilize a metal plate although some use preformed mounting bases. Use your instructions and you’ll have a fan very quickly. Smaller fans may necessitate you to definitely pre-assemble your blades before hanging the fan. I always found installing the motor first then installing the blades last is much easier. It does require however, you to definitely work above your head to have the blades attached.

Once you’ve got the fan hanging, the blades installed and everything tightened you can now step from the ladder, relax, then install the wall controller as provided. These all vary in design however they all follow similar procedures. Remember, you will find a line and load situation here. This means, the line side is the set of wires the feed in to the switch box in the panel as the Load side is planning to your fan. This is critical so be sure you understand the difference. Connect the Load side first: Connect your bonding wire first. Then connect your white neutral wire. Then your hot wire. Next do the Line (incoming) side next: Bond or ground should already be comprised towards the new controller. Next wire your white neutral towards the controllers neutral for that Line side. You may have already wired your neutrals together according to your instructions. Now wire your Hot or Power wire towards the Line side of your respective controller. If you’ve got the fourth wire within, cap it off or use it for that motor control and connect it accordingly to your directions. Red to Red is often the case here. Once completed, get yourself some Iced Tea and luxuriate in your brand-new fan.