Fantasia Fans Fantasia Ceiling Fans Wiring Information in size 2287 X 2678Ceiling Fan Wall Switch Wiring – Hunter ceiling fans are without doubt the very best you can buy, here we have put together all the information you might need to learn about ceiling fans before purchasing, please please remember there are other ceiling fan manufacturers on the market who copy Hunter ceiling fan designs but they’re nowhere close to good, the type of material they’ll use are certainly not as top quality plus they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so while many ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not built the same. Most Hunter ceiling fans possess a reverse option that’s especially important to cut back heating bills during the cold months, warm air could be directed as a result of where it is required spinning the ceiling fan clockwise. Some points to take into account when purchasing a ceiling fan: How much air is definitely being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the maker stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air can be a comfort to no-one. One from the keys to proper air movement is blade pitch. The greater the pitch-the angle from the blade-the greater the air movement offering the blade pitch has been properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials and don’t use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the stress on undersized or under-powered motors. Many fans likewise use extra thin blades to cut back cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes in addition to the number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, in addition they move little or no air, causing very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is usually the consequence of poor engineering design along with a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, though these are a typical supply of operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that are certainly not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade wall mounts can create varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get out of balance, generating wobble through the very heart from the fan. Inexpensive mounting systems with pin fasteners may also give rise to wobble. Hunter fans possess a patented wobble free canopy meaning Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly installed on/off pull chains could become faulty and be removed from the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to market. Defective motor windings can bring about electrical shorts within the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and dark spots start to appear. You may even notice the brass on the fan can be a different colour than the light kit you only added! Quality brass as well as other metallic finishes add a series of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, avoid the fan. Can you really feel a smooth protective coating? That’s a sign from the kind of quality you can find within the famous Hunter Bright Brass Finish.
What will be the minimum height I need within my room to set up an admirer? Safety standards declare that the min height through the floor on the bottom from the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you possess a low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that type of record to face on. So you receive the satisfaction of knowing you have the very best-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the greater air which is being moved. The air moved by the fan generates a wind chill effect that creates you really feel much more comfortable in the warm room. There can be a direct relationship between air movement and comfort – the greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with many additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag on the motor, scaling down the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are prepared for optimal air delivery. How do I know what size fan to get – there are so many sizes available? You need to pick the best size fan for any room to acquire optimum looks, comfort and savings. If the fan is too small for your room, it doesn’t move enough air to make you really feel comfortable. If the fan is too big, it could possibly move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why carry out some fans require oil yet others usually do not? The Hunter Original carries a very unique motor that uses an oil-bath lubrication system. This system keeps the key bearings lubricated constantly, for quiet operation and long-life. It is part from the good reason that this fan carries a limited lifetime motor warranty. Most other fans use motors that usually do not require oil. What makes the Hunter Original so unique within the market in comparison with other fans? The Hunter Original will be the most unique ceiling fan on the market, having a design that goes back on the turn from the twentieth century. Cast iron is used within the motor housing construction to more effectively draw heat away through the electrical windings; heat can be a major enemy of electrical motors. The extra weight from the cast-iron construction also cuts down on the potential for fan wobble. The motor is additionally greater than any other ceiling fan, rendering it the most powerful motor available. This allows the blades to be pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components from the motor, and prolongs the life span from the motor. Added up, these unique design elements develop a powerful, quiet fan which is backed by the limited lifetime warranty.
How do fans cool the area – would they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; it does not lower the area temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on the skin. It will be the feeling you receive once you open the window in the moving car. If you possess a ceiling fan in the room whose temperature is 80 degrees, running the fan can create a wind chill effect that creates you really feel like the temperature is 72 degrees. When used in conjunction with the ac, a ceiling fan can lower energy costs, because you can set the thermostat of the ac at the higher temperature.
Can the ceiling fan supply during the cold months for almost any beneficial purpose? A ceiling fan might help lower energy consumption during the cold months by approximately 15%. The temperature from the air in the heated room varies in layers; the air near the ceiling is warmer than the air near the floor, because warm air rises. A ceiling fan might help push the warmer air which is trapped near the ceiling down again into the area, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it is needed, and also the heating system will not overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan must be run in the clockwise direction. This pushes the air up against the ceilings and around the walls, to softly re-circulate the warm air without creating a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan operate on high-speed will consume less power when compared to a 100-watt lamp. How much can I be prepared to save in heating or cooling costs? A ceiling fan can help to save approximately 95% on cooling costs for any new install and 47% with an existing air cooling system. It may also save approximately 15% on heating costs. Savings will change determined by energy rates. How easy can be a ceiling fan to set up? Most people is certain to get an electrical contractor to set up a ceiling fan, it could be a DIY project but please keep in mind you will need to be able to: Locate a 2″ x 4″ and other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is included by the fan warranty – so how exactly does the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for your stated life from the warranty; which is, a 20-year warranty will take care of the motor parts for 20 years. Labour for your motor is mostly covered for 1-year, much like parts and labour for other components from the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with over 115 many years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans could be adjusted with the accessory handheld remote control sold separately through the fan. In fact, remotes can really improve the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible through the comfort of the favourite chair or bedside table. Ceiling fan and light remotes can easily be installed either with all the fan during new installations or on fans which has been previously installed plus use for a while. The installation is a straightforward, do-it-yourself project and will not require any professional wiring. Remote control kits add a handheld transmitter for sending commands on the fan along with a receiver which either conceals inside fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away through the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans could be installed on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest on the ceiling which provides coverage for the electrical box) which has been built to accommodate sloped ceilings. Many quality fans includes this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included with all the fan at original purchase, accessory canopy adapters are offered separately at shops. What length drop rod should I use with my fan? Will the fan be a little more vulnerable to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for your dimension from the fan. So if your ceiling height is 12 feet, you need a 3 foot drop rod so that you can properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the potential for wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a lesser clock pendulum having a fast, unsteady swing. Weight and length combine to generate stability, reducing wobble, whether it is in the ceiling fan or perhaps a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by the certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that will not develop a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum given that they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled through the same wall switch? The answer here is dependent upon how your wall switch is wired. If you possess a single wall switch with two wires (one black, one white), the answer is “no” unless you buy a control specifically made for this sort of switch (Hunter offers three models). The answer is “yes” if you possess a three wire set-up within the single wall switch and buy a more common, dual control that can operate an admirer and light separately from just one switch. Having an electrical contractor put in a third wire could be expensive. What will be the difference in having a ceiling fan installed close on the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet above the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed for your distance through the top from the fan motor on the switch housing bottom.
