Hansen Ceiling Fans – Hunter ceiling fans are without doubt the best you can get, here we have put together all the details you need to know about ceiling fans before purchasing, please please remember there are many ceiling fan manufacturers available who copy Hunter ceiling fan designs however they are nowhere near as good, the types of materials they’ll use usually are not as high quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just like a Hunter,” remember all ceiling fans usually are not good quality. Most Hunter ceiling fans have a very reverse option which is particularly important to lessen heating bills in winter, heated air could be directed right down to where it’s essental to spinning the ceiling fan clockwise. Some points to think about when choosing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air can be a comfort to no one. One of the secrets of proper air movement is blade pitch. The greater the pitch-the angle of the blade-the greater air movement offering the blade pitch has become properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and use big enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the load on undersized or under-powered motors. Many fans likewise use extra thin blades to lessen cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a lover consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, but they also move very little air, causing very inefficient fans, Hunter fans are made to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is truly the result of poor engineering design as well as a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, though these are generally a common source of operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade supports can make varying degrees of pitch (blade angle), throwing a lover into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get free from balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans have a very patented wobble free canopy which means Hunter fans are invariably straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly installed on/off pull chains can become faulty and stay removed of the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to advertise. Defective motor windings can bring about electrical shorts in the motor. Low quality fan bearings may be “shielded” somewhere only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots start to appear. You may even spot the brass around the fan can be a different colour than the light kit you merely added! Quality brass as well as other metallic finishes include a series of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, stay away from the fan. Can you are feeling an easy protective coating? That’s a sign of the kind of quality you’ll find in the famous Hunter Bright Brass Finish.
What could be the minimum height I need during my room that will put up a lover? Safety standards state that the min height in the floor for the bottom of the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really be sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that sort of record to face on. So you obtain the satisfaction of knowing you may have the best-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the greater air which is being moved. The air moved with the fan generates a wind chill effect that makes you are feeling convenient inside a warm room. There can be a direct relationship between air movement and comfort – the greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with a few additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, scaling down the RPM of the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are designed for optimal air delivery. How do I know very well what size fan to buy – there are many sizes available? You need to choose the best size fan to get a room to get optimum looks, comfort and savings. If the fan is simply too small for your room, it does not move enough air to make you are feeling comfortable. If the fan is simply too big, it may move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why do some fans require oil while others don’t? The Hunter Original features a very unique motor that utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated all the time, for quiet operation and long-life. It is part of the reason this fan features a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique in the market compared to all the other fans? The Hunter Original could be the most unique ceiling fan around the market, having a design that dates back for the turn of the last century. Cast iron is used in the motor housing construction to more efficiently draw heat away in the electrical windings; heat can be a major enemy of electrical motors. The extra weight of the cast-iron construction also decreases the risk of fan wobble. The motor is additionally greater than every other ceiling fan, which makes it the strongest motor available. This allows the blades to get pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components of the motor, and prolongs the life of the motor. Added up, these unique design elements create a powerful, quiet fan which is backed with a limited lifetime warranty.
How do fans cool the bedroom – would they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; no lower the bedroom temperature. Wind chill effect makes you are feeling cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you will get whenever you open your window inside a moving car. If you have a very ceiling fan inside a room whose temperature is 80 degrees, running the fan can make a wind chill effect that makes you are feeling as if the temperature is 72 degrees. When found in conjunction with an air conditioning unit, a ceiling fan can lower energy costs, since you can set the thermostat of your respective air conditioning unit at the higher temperature.
Can the ceiling fan provide in winter for just about any beneficial purpose? A ceiling fan may help lower energy consumption in winter by approximately 15%. The temperature of the air inside a heated room varies in layers; air near the ceiling is warmer than the air near the floor, because heated air rises. A ceiling fan may help push the warmer air which is trapped near the ceiling back off into the bedroom, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it’s needed, as well as the furnace does not overwork to warm the bedroom. To properly de-stratify a warmed room, the ceiling fan must be run inside a clockwise direction. This pushes air facing the ceilings and around the walls, to softly re-circulate the heated air without creating a cooling wind chill effect.
How much electricity will a lover use? On average, a ceiling fan run on high speed will consume less power when compared to a 100-watt light bulb. How much can I be prepared to save in heating and or cooling costs? A ceiling fan can save approximately 95% on cooling costs to get a new install and 47% with an existing air-con system. It can also save approximately 15% on heating costs. Savings will vary based on energy rates. How easy can be a ceiling fan to install? Most people is certain to get an electrical contractor to install a ceiling fan, it could be a DIY project but please remember you will need to get able to: Locate a 2″ x 4″ and other suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is covered with the fan warranty – how can the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for your stated life of the warranty; which is, a 20-year warranty covers the motor parts for 20 years. Labour for your motor is mostly covered for 1-year, just like parts and labour for all the other components of the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 many years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans could be adjusted with an accessory remote device sold separately in the fan. In fact, controllers can definitely enhance the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and full-range light dimming — all possible in the comfort of your respective favourite chair or bedside table. Ceiling fan and light controllers can easily be installed either while using fan during new installations or on fans that have been previously installed plus use for a while. The installation is a straightforward, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan as well as a receiver which either conceals in the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans could be installed on angled or vaulted ceilings by using a lover canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which has become designed to accommodate sloped ceilings. Many quality fans includes this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included while using fan at original purchase, accessory canopy adapters are sold separately at stores. What length drop rod should I use with my fan? Will the fan be more prone to wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for your dimension of the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the risk of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a reduced clock pendulum having a fast, unsteady swing. Weight and length combine to generate stability, reducing wobble, whether it’s inside a ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated with a certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that does not create a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum simply because they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled in the same wall switch? The answer here is dependent upon how your wall switch happens to be wired. If you have a very single wall switch with two wires (one black, one white), the answer then is “no” if you don’t obtain a control specifically designed for this sort of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up in the single wall switch and obtain a more common, dual control that can operate a lover and light separately from an individual switch. Having an electrical contractor use a third wire could be expensive. What could be the difference in having a ceiling fan installed close for the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet higher than the floor. Extension drop rods are widely-used to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to rate the fan at 8 feet (one foot have to be allowed for your distance in the top of the fan motor for the switch housing bottom.