Hugger Ceiling Fan With Light And Remote – Hunter ceiling fans are without doubt the best you should buy, here we have put together every piece of information you need to learn about ceiling fans before purchasing, please bear in mind that there are more ceiling fan manufacturers out there who copy Hunter ceiling fan designs but they are nowhere close to good, the type of material they’ll use usually are not as high quality plus they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so although many ceiling fans may look “just being a Hunter,” remember all ceiling fans usually are not good quality. Most Hunter ceiling fans use a reverse option which is particularly significant to reduce heating bills during the cold months, hot air could be directed into where it can be essental to spinning the ceiling fan clockwise. Some points to think about when selecting a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to no one. One from the secrets to proper air movement is blade pitch. The greater the pitch-the angle from the blade-the higher the environment movement providing the blade pitch has been properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials , nor use large enough or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the worries on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes plus the volume of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, they also move little or no air, causing very inefficient fans, Hunter fans are built to shift plenty of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is often the results of poor engineering design as well as a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, although these are a typical way to obtain operating noise. A deficiency of proper dampening between metal parts also can create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that usually are not matched in carefully weighed and balanced sets also can wobble. Inconsistent blade supports can create varying degrees of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get rid of balance, generating wobble in the very heart from the fan. Inexpensive mounting systems with pin fasteners also can help with wobble. Hunter fans use a patented wobble free canopy meaning Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly installed on/off pull chains can be faulty and be brought out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to promote. Defective motor windings can lead to electrical shorts within the motor. Low quality fan bearings could be “shielded” on one hand only, allowing dust to penetrate and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and brown spots begin to appear. You may even notice the brass on the fan can be a different colour compared to the light kit you simply added! Quality brass and also other metallic finishes include a number of grinding and buffing steps between multiple plating processes. To help determine the standard of a plated finish, glance at the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, avoid the fan. Can you feel an even protective coating? That’s a sign from the kind of quality you will find within the famous Hunter Bright Brass Finish.
What may be the minimum height I need in my room to set up a fan? Safety standards suggest that the min height in the floor to the bottom from the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you use a low ceiling, just really ensure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that type of record to face on. So you obtain the reassurance of knowing you have got the best-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the harder air that is being moved. The air moved from the fan produces a wind chill effect which makes you feel more comfortable in a warm room. There can be a direct relationship between air movement and comfort – the harder air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag on the motor, slowing down the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, are equipped for optimal air delivery. How do I know very well what size fan to buy – there are plenty of sizes available? You need to choose the best size fan for the room to have optimum looks, comfort and savings. If the fan is too small to the room, it does not move enough air to make you feel comfortable. If the fan is too big, it could move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why perform some fans require oil and others do not? The Hunter Original has a very unique motor that utilizes an oil-bath lubrication system. This system keeps the key bearings lubricated constantly, for quiet operation and long-life. It is part from the good reason that this fan has a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique within the market in comparison with all the fans? The Hunter Original may be the most unique ceiling fan on the market, with a design that dates back to the turn from the 20th century. Cast iron can be used within the motor housing construction to more effectively draw heat away in the electrical windings; heat can be a major enemy of electrical motors. The extra weight from the cast-iron construction also reduces the prospect of fan wobble. The motor is also bigger than any other ceiling fan, rendering it the most powerful motor available. This allows the blades to become pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components from the motor, and prolongs lifespan from the motor. Added up, these unique design elements make a powerful, quiet fan that is backed by way of a limited lifetime warranty.
How do fans cool the area – would they actually lower the temperature? A ceiling fan cools by creating a wind chill effect; it doesn’t lower the area temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on your skin. It may be the feeling you receive once you open the window in a moving car. If you use a ceiling fan in a room whose temperature is 80 degrees, running the fan can create a wind chill effect which makes you feel like the temperature is 72 degrees. When used in conjunction with the ac, a ceiling fan can lower energy costs, since set the thermostat of your respective ac with a higher temperature.
Can the ceiling fan be utilized during the cold months for virtually any beneficial purpose? A ceiling fan might help lower energy consumption during the cold months by approximately 15%. The temperature from the air in a heated room varies in layers; the environment near the ceiling is warmer compared to the air near the floor, because hot air rises. A ceiling fan might help push the warmer air that is trapped near the ceiling back off into the area, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it can be needed, along with the furnace does not overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan needs to be run in a clockwise direction. This pushes the environment against the ceilings and along the walls, to gently re-circulate the hot air without creating a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan operate on broadband will consume less power than a 100-watt bulb. How much can I expect to save in heating and or cooling costs? A ceiling fan can conserve approximately 95% on cooling costs for the new install and 47% with an existing ac system. It also can save approximately 15% on heating costs. Savings will change according to energy rates. How easy can be a ceiling fan to setup? Most people is certain to get an electrician to setup a ceiling fan, it could be a DIY project but please bear in mind you will need to become able to: Locate a 2″ x 4″ and other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is covered from the fan warranty – what makes the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts to the stated life from the warranty; that is, a 20-year warranty will cover the motor parts for 20 years. Labour to the motor is mostly covered for 1-year, as are parts and labour for all the components from the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company with over 115 numerous years of experience behind its warranties. Can my fan be adjusted by handy remote control? Most ceiling fans could be adjusted with the accessory handy remote control sold separately in the fan. In fact, remote controls can really increase the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible in the comfort of your respective favourite chair or bedside table. Ceiling fan and light remote controls can easily be installed either using the fan during new installations or on fans that have been previously installed along with use for a while. The installation is an easy, do-it-yourself project and does not require any professional wiring. Remote control kits include a handheld transmitter for sending commands to the fan as well as a receiver which either conceals within the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans could be installed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which covers the electrical box) which has been made to accommodate sloped ceilings. Many quality fans should include this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included using the fan at original purchase, accessory canopy adapters are offered separately at retail outlets. What length drop rod should I use with my fan? Will the fan be more at risk of wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot to the dimension from the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a smaller clock pendulum with a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it can be in a ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by way of a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that does not make a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum given that they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled in the same wall switch? The answer here is determined by how your wall switch is currently wired. If you use a single wall switch with two wires (one black, one white), the reply is “no” if you do not buy a control specifically made for this type of switch (Hunter offers three models). The answer is “yes” if you use a three wire set-up within the single wall switch and buy a more common, dual control that will operate a fan and light separately from a single switch. Having an electrician use a third wire could be expensive. What may be the difference in having a ceiling fan installed close to the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans needs to be installed approximately 8 to 9 feet over the floor. Extension drop rods are used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to rate the fan at 8 feet (one foot must be allowed to the distance in the top from the fan motor to the switch housing bottom.