72 Outdoor Ceiling Fan – Hunter ceiling fans are undoubtedly the top you can buy, have a look at have build every piece of information you will need to know about ceiling fans before purchasing, please bear in mind that there are more ceiling fan manufacturers around who copy Hunter ceiling fan designs but they are nowhere near as good, the materials they normally use usually are not as good quality and they also cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so even though many ceiling fans may look “just like a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a reverse option which is particularly significant to lessen heating bills in winter, hot air could be directed as a result of where it is needed by spinning the ceiling fan clockwise. Some points to take into account when selecting a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to nobody. One of the recommendations for proper air movement is blade pitch. The greater the pitch-the angle of the blade-the more the air movement offering the blade pitch has been properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and do not use sufficient or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the stress on undersized or under-powered motors. Many fans also have extra thin blades to lessen cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes together with level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, they also move almost no air, producing very inefficient fans, Hunter fans are built to shift a great deal of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is truly the results of poor engineering design along with a insufficient precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, though they’re a common source of operating noise. A insufficient proper dampening between metal parts also can create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets also can wobble. Inconsistent blade supports can cause varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that could easily get out of balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners also can contribute to wobble. Hunter fans have a patented wobble free canopy which means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly set up on/off pull chains can be faulty and be got out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to advertise. Defective motor windings can lead to electrical shorts in the motor. Low quality fan bearings could be “shielded” on one side only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and liver spots set out to appear. You may even spot the brass around the fan can be a different colour compared to light kit you only added! Quality brass as well as other metallic finishes include a group of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, avoid the fan. Can you really feel a smooth protective coating? That’s a sign of the kind of quality you will discover in the famous Hunter Bright Brass Finish.
What will be the minimum height I need inside my room to set up an admirer? Safety standards claim that the min height in the floor for the bottom of the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that type of record to face on. So you have the reassurance of knowing you have the top-backed warranty in the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, greater air that is being moved. The air moved from the fan generates a wind chill effect that produces you really feel convenient in the warm room. There can be a direct relationship between air movement and comfort – greater air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference between a four and five blade ceiling fan? The main difference between a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM of the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, focus on optimal air delivery. How do I know what size fan to buy – there are many sizes available? You need to select the right size fan for a room to obtain optimum looks, comfort and savings. If the fan is simply too small for your room, it doesn’t move enough air to make you really feel comfortable. If the fan is simply too big, it could possibly move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why perform some fans require oil among others don’t? The Hunter Original includes a very unique motor which utilizes an oil-bath lubrication system. This system keeps the principle bearings lubricated at all times, for quiet operation and long-life. It is part of the reason this fan includes a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique in the market in comparison with all the fans? The Hunter Original will be the most unique ceiling fan around the market, having a design that goes for the turn of the last century. Cast iron is used in the motor housing construction to better draw heat away in the electrical windings; heat can be a major enemy of electrical motors. The extra weight of the cast-iron construction also cuts down on risk of fan wobble. The motor can also be greater than any other ceiling fan, rendering it the strongest motor available. This allows the blades being pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components of the motor, and prolongs the life of the motor. Added up, these unique design elements produce a powerful, quiet fan that is backed by way of a limited lifetime warranty.
How do fans cool the room – do they actually lower the temperature? A ceiling fan cools by making a wind chill effect; this doesn’t lower the room temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on the skin. It will be the feeling you receive if you open of the question in the moving car. If you have a ceiling fan in the room whose temperature is 80 degrees, running the fan can cause a wind chill effect that produces you really feel as though the temperature is 72 degrees. When employed in conjunction with the air conditioning unit, a ceiling fan can lower energy costs, since you can set the thermostat of one’s air conditioning unit at the higher temperature.
Can the ceiling fan be utilized in winter for almost any beneficial purpose? A ceiling fan may help lower energy consumption in winter by around 15%. The temperature of the air in the heated room varies in layers; the air nearby the ceiling is warmer compared to air nearby the floor, because hot air rises. A ceiling fan may help push the warmer air that is trapped nearby the ceiling back off into the room, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it is needed, and the home heating won’t overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan must be run in the clockwise direction. This pushes the air against the ceilings and on the walls, to softly re-circulate the hot air without making a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan are powered by broadband will consume less power than a 100-watt light bulb. How much can I be prepared to save in heating and even cooling costs? A ceiling fan can help to save around 95% on cooling costs for a new install and 47% on an existing ac system. It also can save around 15% on heating costs. Savings vary based on energy rates. How easy can be a ceiling fan to install? Most people are certain to get a mason to install a ceiling fan, it could be a DIY project but please take into account you will need being able to: Locate a 2″ x 4″ or another suitable support in the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is included from the fan warranty – so how exactly does the Hunter warranty can rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for your stated life of the warranty; that is, a 20-year warranty covers the motor parts for 20 years. Labour for your motor is mostly covered for 1-year, just like parts and labour for all the components of the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with over 115 years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans could be adjusted with the accessory remote control sold separately in the fan. In fact, remote controls can really increase the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible in the comfort of one’s favourite chair or bedside table. Ceiling fan and light-weight remote controls can easily be installed either while using fan during new installations or on fans that have been previously installed and in use for some time. The installation is an easy, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan along with a receiver which either conceals within the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away in the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans could be set up on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest for the ceiling which covers the electrical box) which has been built to accommodate sloped ceilings. Many quality fans includes such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included while using fan at original purchase, accessory canopy adapters can be purchased separately at shops. What length drop rod should I use with my fan? Will the fan be a little more at risk of wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for your dimension of the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the risk of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a reduced clock pendulum having a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it is in the ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by way of a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that won’t produce a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can cause a hum since they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled in the same wall switch? The answer here is determined by how your wall switch happens to be wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you do not buy a control created specifically for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up in the single wall switch and buy a more common, dual control that will operate an admirer and light-weight separately from just one switch. Having a mason purchase a third wire could be expensive. What will be the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would need a 3 foot drop rod to put the fan at 8 feet (one foot must be allowed for your distance in the top of the fan motor for the switch housing bottom.