Oil Rubbed Bronze Ceiling Fan – Hunter ceiling fans are without doubt the best you can get, here we have put together all the details you need to understand ceiling fans before purchasing, please keep in mind there are many ceiling fan manufacturers on the market who copy Hunter ceiling fan designs however they are nowhere close to good, the type of material they will use are certainly not as good quality and so they cannot copy hunter ceiling fans patents such as whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although ceiling fans may look “just just like a Hunter,” remember all ceiling fans are certainly not made the same. Most Hunter ceiling fans have a very reverse option which is especially important to relieve heating bills during the cold months, heated air may be directed right down to where it really is essental to spinning the ceiling fan clockwise. Some points to think about when choosing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is a comfort to nobody. One from the recommendations for proper air movement is blade pitch. The greater the pitch-the angle from the blade-the greater the environment movement supplying the blade pitch has become properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and use large enough or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the strain on undersized or under-powered motors. Many fans likewise use extra thin blades to relieve cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes in addition to the number of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, in addition they move hardly any air, causing very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is truly the response to poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, despite the fact that these are generally perhaps the most common method to obtain operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that are certainly not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade wall mounts can create varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get out of balance, generating wobble from the very heart from the fan. Inexpensive mounting systems with pin fasteners can also help with wobble. Hunter fans have a very patented wobble free canopy meaning Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch are certainly not specified and matched correctly. Improperly set up on/off pull chains can be faulty and be got out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to market. Defective motor windings can lead to electrical shorts inside the motor. Low quality fan bearings could be “shielded” on one side only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and liver spots begin to appear. You may even spot the brass around the fan is a different colour as opposed to light kit you only added! Quality brass along with other metallic finishes will include a group of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the counter spot easily? If so, avoid the fan. Can you really feel an easy protective coating? That’s a sign from the kind of quality you’ll find inside the famous Hunter Bright Brass Finish.
What will be the minimum height I need inside my room to place up a fan? Safety standards claim that the min height from the floor for the bottom from the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really make certain that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that kind of record to face on. So you obtain the comfort of knowing you have got the best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet per minute. The greater the CFM, the greater air which is being moved. The air moved by the fan produces a wind chill effect that makes you really feel convenient in the warm room. There is a direct relationship between air movement and comfort – the greater air moved, the greater the wind chill effect. Hunter fans generally move more air than competitive models due to custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with some additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are equipped for optimal air delivery. How do I determine what size fan to purchase – there are plenty of sizes available? You need to choose the best size fan for the room to acquire optimum looks, comfort and savings. If the fan is way too small for that room, it will not move enough air to make you really feel comfortable. If the fan is way too big, it could move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do a little fans require oil yet others tend not to? The Hunter Original includes a very unique motor which utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated at all times, for quiet operation and long-life. It is part from the good reason that this fan includes a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique inside the market compared to all the other fans? The Hunter Original will be the most unique ceiling fan around the market, which has a design that goes back for the turn from the last century. Cast iron is utilized inside the motor housing construction to more effectively draw heat away from the electrical windings; heat is a major enemy of electrical motors. The extra weight from the cast-iron construction also cuts down on the prospect of fan wobble. The motor is additionally greater than some other ceiling fan, so that it is the best motor available. This allows the blades to be pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components from the motor, and prolongs the life span from the motor. Added up, these unique design elements create a powerful, quiet fan which is backed by a limited lifetime warranty.
How do fans cool the space – will they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; it doesn’t lower the space temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on your skin. It will be the feeling you get when you open of the question in the moving car. If you have a very ceiling fan in the room whose temperature is 80 degrees, running the fan can create a wind chill effect that makes you really feel as if the temperature is 72 degrees. When used in conjunction with the air conditioner, a ceiling fan can lower energy costs, because you can set the thermostat of the air conditioner with a higher temperature.
Can the ceiling fan be utilized during the cold months for any beneficial purpose? A ceiling fan can help lower energy consumption during the cold months by as much as 15%. The temperature from the air in the heated room varies in layers; the environment nearby the ceiling is warmer as opposed to air nearby the floor, because heated air rises. A ceiling fan can help push the warmer air which is trapped nearby the ceiling back off into the space, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it really is needed, and also the home heating will not overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan should be run in the clockwise direction. This pushes the environment up against the ceilings and along the walls, to softly re-circulate the heated air without setting up a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on high speed will consume less power than the usual 100-watt light bulb. How much can I be prepared to save in heating and even cooling costs? A ceiling fan can help to save as much as 95% on cooling costs for the new install and 47% with an existing air conditioning system. It can also save as much as 15% on heating costs. Savings vary based on energy rates. How easy is a ceiling fan to install? Most people are certain to get an electrical contractor to install a ceiling fan, it may be a DIY project but please keep in mind you will need to be able to: Locate a 2″ x 4″ or any other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is included by the fan warranty – how can the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for that stated life from the warranty; which is, a 20-year warranty will handle the motor parts for 20 years. Labour for that motor is normally covered for 1-year, much like parts and labour for all the other components from the fan. All Hunter fans are backed by a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with 115 a lot of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans may be adjusted with the accessory remote device sold separately from the fan. In fact, remote controls will surely increase the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible from the comfort of the favourite chair or bedside table. Ceiling fan and light remote controls can easily be installed either with the fan during new installations or on fans which has been previously installed plus use for a while. The installation is a straightforward, do-it-yourself project and will not require any professional wiring. Remote control kits will include a handheld transmitter for sending commands for the fan and a receiver which either conceals inside the fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away from the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans may be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which has become designed to accommodate sloped ceilings. Many quality fans will incorporate this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, in case not included with the fan at original purchase, accessory canopy adapters are sold separately at retail stores. What length drop rod should I use with my fan? Will the fan be at risk of wobble if I make use of a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for that dimension from the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod so that you can properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans and reduce the prospect of wobble. Think of a grandfather clock pendulum and its slow, heavy swing versus a smaller clock pendulum which has a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in the ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by a certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that will not create a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum given that they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled from the same wall switch? The answer here is dependent upon how your wall switch is wired. If you have a very single wall switch with two wires (one black, one white), the reply is “no” unless you buy a control created for this kind of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up inside the single wall switch and buy a more common, dual control which will operate a fan and light separately from a single switch. Having an electrical contractor put in a third wire may be expensive. What will be the difference in having a ceiling fan installed close for the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights more than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to position the fan at 8 feet (one foot must be allowed for that distance from the top from the fan motor for the switch housing bottom.