Cathedral Ceiling Fan – Hunter ceiling fans are unquestionably the best you can buy, have a look at have build all the details you might need to learn about ceiling fans before purchasing, please please remember there are other ceiling fan manufacturers out there who copy Hunter ceiling fan designs but they’re nowhere close to good, the materials they will use aren’t as high quality and they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so while many ceiling fans may look “just being a Hunter,” remember all ceiling fans aren’t made the same. Most Hunter ceiling fans have a very reverse option that is especially important to lessen heating bills during the cold months, hot air can be directed into where it can be needed by spinning the ceiling fan clockwise. Some points to consider when choosing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is really a comfort to no person. One in the recommendations for proper air movement is blade pitch. The greater the pitch-the angle in the blade-the higher mid-air movement providing the blade pitch may be properly harmonized with the motor. Unlike Hunter some manufacturers skimp on materials and do not use sufficient or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the strain on undersized or under-powered motors. Many fans also employ extra thin blades to lessen cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy an admirer consumes together with level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, but they also move hardly any air, causing very inefficient fans, Hunter fans are built to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created every time a ceiling fan is running is usually the response to poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, although these are generally a common way to obtain operating noise. A not enough proper dampening between metal parts also can create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans only use the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that aren’t matched in carefully weighed and balanced sets also can wobble. Inconsistent blade wall mounts can create varying levels of pitch (blade angle), throwing an admirer into an unbalanced wobble. And poorly manufactured motors have rotors that will easily get free from balance, generating wobble in the very heart in the fan. Inexpensive mounting systems with pin fasteners also can give rise to wobble. Hunter fans have a very patented wobble free canopy this means Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly installed on/off pull chains could become faulty and become got out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to advertise. Defective motor windings can lead to electrical shorts within the motor. Low quality fan bearings could possibly be “shielded” somewhere only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and brown spots set out to appear. You may even notice the brass on the fan is really a different colour compared to light kit you only added! Quality brass as well as other metallic finishes will include a group of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, steer clear of the fan. Can you really feel an easy protective coating? That’s a sign in the kind of quality you will discover within the famous Hunter Bright Brass Finish.
What may be the minimum height I need within my room to set up an admirer? Safety standards suggest that the min height in the floor on the bottom in the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really be sure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that sort of record to face on. So you have the peace of mind of knowing you’ve got the best-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, the more air that’s being moved. The air moved through the fan generates a wind chill effect that produces you really feel more at ease in a very warm room. There is really a direct relationship between air movement and comfort – the more air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, with a few additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag on the motor, slowing down the RPM in the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, focus on optimal air delivery. How do I know what size fan to acquire – there are many sizes available? You need to pick the best size fan for a room to obtain optimum looks, comfort and savings. If the fan is way too small to the room, it doesn’t move enough air to make you really feel comfortable. If the fan is way too big, it could move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why perform some fans require oil among others don’t? The Hunter Original includes a very unique motor which utilizes an oil-bath lubrication system. This system keeps the principle bearings lubricated all the time, for quiet operation and long-life. It is part in the reason this fan includes a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique within the market when compared with all other fans? The Hunter Original may be the most unique ceiling fan on the market, having a design that extends back on the turn in the last century. Cast iron is utilized within the motor housing construction to better draw heat away in the electrical windings; heat is really a major enemy of electrical motors. The extra weight in the cast-iron construction also reduces the risk of fan wobble. The motor can be greater than another ceiling fan, rendering it the strongest motor available. This allows the blades to get pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components in the motor, and prolongs the life span in the motor. Added up, these unique design elements make a powerful, quiet fan that’s backed by the limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; this doesn’t lower the room temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration on your skin. It may be the feeling you will get if you open of the question in a very moving car. If you have a very ceiling fan in a very room whose temperature is 80 degrees, running the fan can create a wind chill effect that produces you really feel just as if the temperature is 72 degrees. When found in conjunction with an ac, a ceiling fan can lower energy costs, because you can set the thermostat of your ac at the higher temperature.
Can the ceiling fan be used during the cold months for any beneficial purpose? A ceiling fan may help lower energy consumption during the cold months by approximately 15%. The temperature in the air in a very heated room varies in layers; mid-air near the ceiling is warmer compared to air near the floor, because hot air rises. A ceiling fan may help push the warmer air that’s trapped near the ceiling back into the room, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it can be needed, and also the heating system will not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan must be run in a very clockwise direction. This pushes mid-air against the ceilings and on the walls, to softly re-circulate the hot air without developing a cooling wind chill effect.
How much electricity will an admirer use? On average, a ceiling fan run using broadband will consume less power than a 100-watt lamp. How much can I expect you’ll save in heating or cooling costs? A ceiling fan can help to save approximately 95% on cooling costs for a new install and 47% on an existing air conditioning system. It also can save approximately 15% on heating costs. Savings will change determined by energy rates. How easy is really a ceiling fan to install? Most people can get a mason to install a ceiling fan, it can be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ or any other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is roofed through the fan warranty – how can the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that cover the motor parts to the stated life in the warranty; that’s, a 20-year warranty covers the motor parts for 20 years. Labour to the motor is mostly covered for 1-year, as are parts and labour for all other components in the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company craigs list 115 years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans can be adjusted with an accessory handheld remote control sold separately in the fan. In fact, controllers will surely increase the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and wide range light dimming — all possible in the comfort of your favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with the fan during new installations or on fans that have been previously installed and in use for a while. The installation is an easy, do-it-yourself project and will not require any professional wiring. Remote control kits will include a handheld transmitter for sending commands on the fan and a receiver which either conceals within the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans can be installed on angled or vaulted ceilings by using an admirer canopy (the “cap” visible closest on the ceiling which takes care of the electrical box) which may be made to accommodate sloped ceilings. Many quality fans includes this type of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included with the fan at original purchase, accessory canopy adapters can be purchased separately at shops. What length drop rod should I use with my fan? Will the fan become more prone to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot to the dimension in the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod to be able to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the risk of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus an inferior clock pendulum having a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it can be in a very ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by the certain sort of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a very way that will not make a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum since they control the fan’s speed in a very different manner. For quiet fan operation, capacitor type fan controls are suited to most ceiling fan installations. Can a ceiling fan and a light kit be controlled in the same wall switch? The answer here depends on how your wall switch happens to be wired. If you have a very single wall switch with two wires (one black, one white), the answer is “no” unless you obtain a control created specifically for this type of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up within the single wall switch and obtain a more common, dual control that may operate an admirer and light-weight separately from a single switch. Having a mason put in a third wire can be expensive. What may be the difference in having a ceiling fan installed close on the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet across the floor. Extension drop rods are used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would require a 3 foot drop rod to rate the fan at 8 feet (one foot has to be allowed to the distance in the top in the fan motor on the switch housing bottom.