Ceiling Fans Modern – Hunter ceiling fans are without doubt the top you can purchase, have a look at have come up with every piece of information you will need to understand about ceiling fans before purchasing, please please remember there are additional ceiling fan manufacturers around who copy Hunter ceiling fan designs but you are nowhere close to good, the type of material they will use usually are not as excellent and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just just like a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a very reverse option that’s particularly significant to reduce heating bills in the winter months, heated air can be directed right down to where it really is required spinning the ceiling fan clockwise. Some points to take into consideration when buying a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air can be a comfort to no-one. One with the secrets to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the higher air movement offering the blade pitch has become properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials and use sufficient or powerful enough motors to compliment proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to reduce the load on undersized or under-powered motors. Many fans also have extra thin blades to reduce cost. The reduced blade area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes together with amount of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, they also move little or no air, producing very inefficient fans, Hunter fans are built to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is truly the results of poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to reduce cost, despite the fact that they’re a typical method to obtain operating noise. A not enough proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans only use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade supports can create varying degrees of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that may easily get out of balance, generating wobble through the very heart with the fan. Inexpensive mounting systems with pin fasteners may also contribute to wobble. Hunter fans have a very patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly attached to/off pull chains may become faulty and become removed with the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to market. Defective motor windings can cause electrical shorts inside motor. Low quality fan bearings may be “shielded” on one side only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and brown spots commence to appear. You may even notice the brass around the fan can be a different colour than the light kit you just added! Quality brass and other metallic finishes add a series of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, consider the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, steer clear of the fan. Can you really feel a smooth protective coating? That’s a sign with the kind of quality you’ll find inside famous Hunter Bright Brass Finish.
What could be the minimum height I need inside my room that will put up a follower? Safety standards claim that the min height through the floor towards the bottom with the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really ensure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans having a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside ceiling fan business. No other manufacturer has that sort of record to square on. So you get the reassurance of knowing you’ve got the top-backed warranty inside business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the greater air that is certainly being moved. The air moved by the fan creates a wind chill effect that makes you really feel much more comfortable in a warm room. There can be a direct relationship between air movement and comfort – the greater air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, with some additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than the usual 5-blade fan. The 5th blade puts additional drag around the motor, reducing the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are designed for optimal air delivery. How do I understand what size fan to purchase – there are numerous sizes available? You need to choose the best size fan for the room to obtain optimum looks, comfort as well as savings. If the fan is too small for your room, it will not move enough air to make you really feel comfortable. If the fan is too big, it may move a lot of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why do some fans require oil among others tend not to? The Hunter Original features a very unique motor which uses an oil-bath lubrication system. This system keeps the principle bearings lubricated constantly, for quiet operation and long-life. It is part with the reasons why this fan features a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique inside market when compared with all the fans? The Hunter Original could be the most unique ceiling fan around the market, having a design that goes towards the turn with the 20th century. Cast iron is used inside motor housing construction to more effectively draw heat away through the electrical windings; heat can be a major enemy of electrical motors. The extra weight with the cast-iron construction also decreases the possibility of fan wobble. The motor is additionally greater than another ceiling fan, making it the best motor available. This allows the blades to become pitched at the 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components with the motor, and prolongs the life with the motor. Added up, these unique design elements produce a powerful, quiet fan that is certainly backed by the limited lifetime warranty.
How do fans cool the room – would they actually lower the temperature? A ceiling fan cools by developing a wind chill effect; it doesn’t lower the room temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration onto the skin. It could be the feeling you get when you open your window in a moving car. If you have a very ceiling fan in a room whose temperature is 80 degrees, running the fan can create a wind chill effect that makes you really feel like the temperature is 72 degrees. When used in conjunction with an ac, a ceiling fan can lower energy costs, since you can set the thermostat of your respective ac at the higher temperature.
Can the ceiling fan be used in the winter months for almost any beneficial purpose? A ceiling fan may help lower energy consumption in the winter months by as much as 15%. The temperature with the air in a heated room varies in layers; air close to the ceiling is warmer than the air close to the floor, because heated air rises. A ceiling fan may help push the warmer air that is certainly trapped close to the ceiling down again into the room, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it really is needed, and also the heating system does not overwork to warm the room. To properly de-stratify a warmed room, the ceiling fan ought to be run in a clockwise direction. This pushes air against the ceilings and on the walls, to carefully re-circulate the heated air without developing a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan are powered by high-speed will consume less power than the usual 100-watt lamp. How much can I expect you’ll save in heating or cooling costs? A ceiling fan can help to save as much as 95% on cooling costs for the new install and 47% while on an existing air-con system. It may also save as much as 15% on heating costs. Savings will be different determined by energy rates. How easy can be a ceiling fan to setup? Most people is certain to get a mason to setup a ceiling fan, it can be a DIY project but please bear in mind you will need to become able to: Locate a 2″ x 4″ and other suitable support inside ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh less than 8kg)
What is included by the fan warranty – what makes the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts for your stated life with the warranty; that is certainly, a 20-year warranty will handle the motor parts for 20 years. Labour for your motor is normally covered for 1-year, much like parts and labour for all the components with the fan. All Hunter fans are backed by the “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans can be adjusted with an accessory handheld remote control sold separately through the fan. In fact, controllers really can enhance the performance and operating flexibility of ceiling fans as many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible through the comfort of your respective favourite chair or bedside table. Ceiling fan and light controllers can easily be installed either using the fan during new installations or on fans which have been previously installed as well as in use for quite a while. The installation is a simple, do-it-yourself project and does not require any professional wiring. Remote control kits add a handheld transmitter for sending commands towards the fan and a receiver which either conceals inside fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably as much as 40 feet away through the fan.
Can ceiling fans be attached to angled or vaulted ceilings? Yes, ceiling fans can be attached to angled or vaulted ceilings by using a follower canopy (the “cap” visible closest towards the ceiling which covers the electrical box) which has become built to accommodate sloped ceilings. Many quality fans should include such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included using the fan at original purchase, accessory canopy adapters can be bought separately at retail stores. What length drop rod should I use with my fan? Will the fan become more prone to wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for your dimension with the fan. So if your ceiling height is 12 feet, you will need a 3 foot drop rod in order to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the possibility of wobble. Think of a grandfather clock pendulum and it is slow, heavy swing versus a reduced clock pendulum having a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it really is in a ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated by the certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that does not produce a hum. Variable fan speed controls, which create a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum simply because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan and a light kit be controlled through the same wall switch? The answer here depends on how your wall switch happens to be wired. If you have a very single wall switch with two wires (one black, one white), the reply is “no” until you purchase a control specifically designed for such a switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up inside single wall switch and purchase a more common, dual control which will operate a follower and light separately from an individual switch. Having a mason put in a third wire can be expensive. What could be the difference in having a ceiling fan installed close towards the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet over the floor. Extension drop rods are widely-used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to put the fan at 8 feet (one foot should be allowed for your distance through the top with the fan motor towards the switch housing bottom.