Casa Ceiling Fans – Hunter ceiling fans are without doubt the most effective you can purchase, ideas have put together all the information you may want to learn about ceiling fans before purchasing, please bear in mind that there are additional ceiling fan manufacturers around who copy Hunter ceiling fan designs but you are nowhere near as good, the type of material they normally use usually are not as high quality plus they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so while many ceiling fans may look “just as being a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a reverse option which can be particularly significant to cut back heating bills in winter, heated air may be directed down to where it can be needed by spinning the ceiling fan clockwise. Some points to think about when buying a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy will be the fan? Will the fan wobble? How long will the fan last? How durable will be the finish? Will the producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air can be a comfort to no-one. One in the secrets to proper air movement is blade pitch. The greater the pitch-the angle in the blade-the harder mid-air movement supplying the blade pitch continues to be properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and use big enough or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the load on undersized or under-powered motors. Many fans also use extra thin blades to cut back cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes together with level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, they also move very little air, leading to very inefficient fans, Hunter fans are designed to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is usually the result of poor engineering design and a not enough precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, though these are a common supply of operating noise. A not enough proper dampening between metal parts can also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans just use the most effective materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime supply of wobble. Blades that usually are not matched in carefully weighed and balanced sets can also wobble. Inconsistent blade mounting brackets can make varying levels of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get out of balance, generating wobble from the very heart in the fan. Inexpensive mounting systems with pin fasteners can also bring about wobble. Hunter fans have a patented wobble free canopy which means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly installed on/off pull chains can become faulty and be removed in the housing. Inadequate quality, testing, manufacturing and inspection procedures send sub-standard fans to showcase. Defective motor windings can lead to electrical shorts within the motor. Low quality fan bearings could be “shielded” on one side only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look wonderful. Then tarnish and liver spots start to appear. You may even notice the brass around the fan can be a different colour than the light kit you merely added! Quality brass and also other metallic finishes include a number of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, look at the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, stay away from the fan. Can you feel an easy protective coating? That’s a sign in the kind of quality you can find within the famous Hunter Bright Brass Finish.
What will be the minimum height I need during my room that will put up a fan? Safety standards state that the min height from the floor for the bottom in the fan blades must be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really ensure that they’re above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that kind of record to face on. So you obtain the comfort of knowing you have got the most effective-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each minute. The greater the CFM, the greater air that is certainly being moved. The air moved through the fan produces a wind chill effect which makes you feel much more comfortable inside a warm room. There can be a direct relationship between air movement and comfort – the greater air moved, the harder the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What will be the difference from the four and five blade ceiling fan? The main difference from the 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing down the RPM in the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are designed for optimal air delivery. How do I know what size fan to acquire – there are many sizes available? You need to choose the right size fan for a room to obtain optimum looks, comfort and energy savings. If the fan is just too small for your room, it won’t move enough air to make you feel comfortable. If the fan is just too big, it could possibly move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do a little fans require oil while others do not? The Hunter Original has a very unique motor which utilizes an oil-bath lubrication system. This system keeps the primary bearings lubricated always, for quiet operation and long-life. It is part in the reason why this fan has a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique within the market in comparison with all other fans? The Hunter Original will be the most unique ceiling fan around the market, with a design that dates back for the turn in the twentieth century. Cast iron is employed within the motor housing construction to more effectively draw heat away from the electrical windings; heat can be a major enemy of electrical motors. The extra weight in the cast-iron construction also decreases the potential for fan wobble. The motor is also bigger than any other ceiling fan, making it the most powerful motor available. This allows the blades to be pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components in the motor, and prolongs the life span in the motor. Added up, these unique design elements develop a powerful, quiet fan that is certainly backed with a limited lifetime warranty.
How do fans cool the space – can they actually lower the temperature? A ceiling fan cools by making a wind chill effect; it doesn’t lower the space temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on the skin. It will be the feeling you obtain whenever you open of the question inside a moving car. If you have a ceiling fan inside a room whose temperature is 80 degrees, running the fan can make a wind chill effect which makes you feel as though the temperature is 72 degrees. When employed in conjunction having an ac, a ceiling fan can lower energy costs, since set the thermostat of your respective ac at a higher temperature.
Can the ceiling fan supply in winter for just about any beneficial purpose? A ceiling fan may help lower energy consumption in winter by around 15%. The temperature in the air inside a heated room varies in layers; mid-air at the ceiling is warmer than the air at the floor, because heated air rises. A ceiling fan may help push the warmer air that is certainly trapped at the ceiling back off into the space, thus de-stratifying the layers of heated air. As a result, the heated air is circulated where it can be needed, and the heat won’t overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan should be run inside a clockwise direction. This pushes mid-air against the ceilings and down the walls, to gently re-circulate the heated air without making a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan operate on high-speed will consume less power compared to a 100-watt light bulb. How much can I anticipate to save in heating and or cooling costs? A ceiling fan can help to conserve around 95% on cooling costs for a new install and 47% with an existing ac system. It can also save around 15% on heating costs. Savings will be different determined by energy rates. How easy can be a ceiling fan to setup? Most people is certain to get an electrician to setup a ceiling fan, it may be a DIY project but please remember you will need to be able to: Locate a 2″ x 4″ or another suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is included through the fan warranty – how can the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for your stated life in the warranty; that is certainly, a 20-year warranty covers the motor parts for 20 years. Labour for your motor is usually covered for 1-year, as well as parts and labour for all other components in the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter will be the only fan company with more than 115 many years of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans may be adjusted having an accessory handheld remote control sold separately from the fan. In fact, remote controls can definitely boost the performance and operating flexibility of ceiling fans because so many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible from the comfort of your respective favourite chair or bedside table. Ceiling fan and light-weight remote controls can easily be installed either while using fan during new installations or on fans which has been previously installed along with use for quite a while. The installation is a simple, do-it-yourself project and won’t require any professional wiring. Remote control kits include a handheld transmitter for sending commands for the fan and a receiver which either conceals in the fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably around 40 feet away from the fan.
Can ceiling fans be installed on angled or vaulted ceilings? Yes, ceiling fans may be installed on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest for the ceiling which takes care of the electrical box) which continues to be meant to accommodate sloped ceilings. Many quality fans will include such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included while using fan at original purchase, accessory canopy adapters can be bought separately at shops. What length drop rod should I use with my fan? Will the fan be more prone to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for your dimension in the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod in order to properly position the fan 8 feet from the floor. Using long-length drop rods for fan installations actually help stabilize fans minimizing the potential for wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a lesser clock pendulum with a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it can be inside a ceiling fan or possibly a clock pendulum.
Why does my fan “hum” when I installed a variable speed (solid state) control? Most quality ceiling fans are operated with a certain type of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that won’t develop a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum since they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan and a light kit be controlled from the same wall switch? The answer here depends on how your wall switch happens to be wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” unless you purchase a control created specifically for such a switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up within the single wall switch and purchase a more common, dual control that may operate a fan and light-weight separately from a single switch. Having an electrician put in a third wire may be expensive. What will be the difference in having a ceiling fan installed close for the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to position the fan at 8 feet (one foot must be allowed for your distance from the top in the fan motor for the switch housing bottom.