48 Ceiling Fan With Light – Hunter ceiling fans are without doubt the top you should buy, ideas have assembled every piece of information you need to understand about ceiling fans before purchasing, please be aware that there are many ceiling fan manufacturers around who copy Hunter ceiling fan designs however they are nowhere near as good, materials they normally use usually are not as top quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty on the motor either, so even though many ceiling fans may look “just like a Hunter,” remember all ceiling fans usually are not built the same. Most Hunter ceiling fans have a very reverse option that’s particularly significant to lessen heating bills during the cold months, hot air might be directed into where it can be required spinning the ceiling fan clockwise. Some points to think about when purchasing a ceiling fan: How much air is in fact being circulated? How efficiently will the fan move air? How quiet or noisy may be the fan? Will the fan wobble? How long will the fan last? How durable may be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan seems nice but moves little air is often a comfort to no-one. One in the secrets of proper air movement is blade pitch. The greater the pitch-the angle in the blade-the more air movement providing the blade pitch has been properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and do not use just right or powerful enough motors to support proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the stress on undersized or under-powered motors. Many fans also have extra thin blades to lessen cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, but they also move hardly any air, resulting in very inefficient fans, Hunter fans are created to shift lots of air.
Why Many Fans Are Noisy. An electrical humming created when a ceiling fan is running is often the results of poor engineering design plus a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, although they’re a standard source of operating noise. A deficiency of proper dampening between metal parts may also create and intensify noise, as can the use of extra thin sheet metal motor and mounting system parts. Hunter fans exclusively use the top materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets may also wobble. Inconsistent blade supports can make varying degrees of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that could easily escape balance, generating wobble through the very heart in the fan. Inexpensive mounting systems with pin fasteners may also contribute to wobble. Hunter fans have a very patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly attached to/off pull chains could become faulty and become brought out in the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to advertise. Defective motor windings can cause electrical shorts within the motor. Low quality fan bearings might be “shielded” on one side only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are widely-used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and liver spots commence to appear. You may even notice the brass on the fan is often a different colour compared to light kit you simply added! Quality brass along with other metallic finishes add a number of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the outer lining spot easily? If so, steer clear of the fan. Can you’re feeling an even protective coating? That’s a sign in the kind of quality you’ll find within the famous Hunter Bright Brass Finish.
What may be the minimum height I need within my room to put up a fan? Safety standards claim that the min height through the floor towards the bottom in the fan blades have to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, just really ensure that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that type of record to stand on. So you obtain the reassurance of knowing you have the top-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the more air that is certainly being moved. The air moved through the fan generates a wind chill effect that makes you’re feeling more at ease inside a warm room. There is often a direct relationship between air movement and comfort – the more air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models as a result of custom-engineered motors and blades pitched at the maximum possible angle.
What may be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise linked to 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag on the motor, reducing the RPM in the blades, which decreases the CFM. All Hunter fans, whether four to five blades, are prepared for optimal air delivery. How do I determine what size fan to get – there are so many sizes available? You need to choose the right size fan for any room to obtain optimum looks, comfort and energy savings. If the fan is way too small for the room, it will not move enough air to make you’re feeling comfortable. If the fan is way too big, it may move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use a minimum of 56″ Ceiling fan
Why do a little fans require oil among others tend not to? The Hunter Original has a very unique motor that utilizes an oil-bath lubrication system. This system keeps the main bearings lubricated always, for quiet operation and long-life. It is part in the reasons why this fan has a limited lifetime motor warranty. Most other fans use motors that tend not to require oil. What makes the Hunter Original so unique within the market in comparison with all other fans? The Hunter Original may be the most unique ceiling fan on the market, with a design that goes back towards the turn in the 20th century. Cast iron is employed within the motor housing construction to more effectively draw heat away through the electrical windings; heat is often a major enemy of electrical motors. The extra weight in the cast-iron construction also cuts down on the possibility of fan wobble. The motor can be greater than any other ceiling fan, making it the most powerful motor available. This allows the blades to be pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components in the motor, and prolongs the life in the motor. Added up, these unique design elements create a powerful, quiet fan that is certainly backed by way of a limited lifetime warranty.
How do fans cool the area – do they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; this doesn’t lower the area temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration onto the skin. It may be the feeling you receive once you open the window inside a moving car. If you have a very ceiling fan inside a room whose temperature is 80 degrees, running the fan can make a wind chill effect that makes you’re feeling just as if the temperature is 72 degrees. When employed in conjunction with the ac, a ceiling fan can lower energy costs, since you can set the thermostat of your ac with a higher temperature.
Can the ceiling fan provide during the cold months for virtually any beneficial purpose? A ceiling fan can help lower energy consumption during the cold months by up to 15%. The temperature in the air inside a heated room varies in layers; air near the ceiling is warmer compared to air near the floor, because hot air rises. A ceiling fan can help push the warmer air that is certainly trapped near the ceiling down again into the area, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it can be needed, along with the heating system will not overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan should be run inside a clockwise direction. This pushes air up against the ceilings and along the walls, to softly re-circulate the hot air without setting up a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run using very fast will consume less power than a 100-watt light bulb. How much can I expect to save in heating and or cooling costs? A ceiling fan can save up to 95% on cooling costs for any new install and 47% while on an existing air-con system. It may also save up to 15% on heating costs. Savings will vary depending on energy rates. How easy is often a ceiling fan to set up? Most people will get a mason to set up a ceiling fan, it might be a DIY project but please bear in mind you will need to be able to: Locate a 2″ x 4″ or other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is roofed through the fan warranty – so how exactly does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties which cover the motor parts for the stated life in the warranty; that is certainly, a 20-year warranty covers the motor parts for 20 years. Labour for the motor is usually covered for 1-year, just like parts and labour for all other components in the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter may be the only fan company craigs list 115 years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans might be adjusted with the accessory remote device sold separately through the fan. In fact, controllers can really increase the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible through the comfort of your favourite chair or bedside table. Ceiling fan and lightweight controllers can easily be installed either while using fan during new installations or on fans which has been previously installed along with use for a while. The installation is an easy, do-it-yourself project and will not require any professional wiring. Remote control kits add a handheld transmitter for sending commands towards the fan plus a receiver which either conceals inside the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away through the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans might be attached to angled or vaulted ceilings by using a fan canopy (the “cap” visible closest towards the ceiling which covers the electrical box) which has been built to accommodate sloped ceilings. Many quality fans will include this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, however, if not included while using fan at original purchase, accessory canopy adapters are sold separately at stores. What length drop rod should I use with my fan? Will the fan be a little more at risk of wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based on the fan-to-floor distance of 8 feet plus 1 foot for the dimension in the fan. So if your ceiling height is 12 feet, you need a 3 foot drop rod to be able to properly position the fan 8 feet through the floor. Using long-length drop rods for fan installations actually help stabilize fans and lower the possibility of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a smaller clock pendulum with a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it can be inside a ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by way of a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed inside a way that will not create a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can make a hum since they control the fan’s speed inside a different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan plus a light kit be controlled through the same wall switch? The answer here is dependent upon how your wall switch is currently wired. If you have a very single wall switch with two wires (one black, one white), the reply is “no” if you don’t buy a control specifically made for this kind of switch (Hunter offers three models). The answer is “yes” if you have a very three wire set-up within the single wall switch and buy a more common, dual control that may operate a fan and lightweight separately from one particular switch. Having a mason use a third wire might be expensive. What may be the difference in having a ceiling fan installed close towards the ceiling versus with a drop rod. For maximum performance and greatest energy savings, ceiling fans should be installed approximately 8 to 9 feet over the floor. Extension drop rods are widely-used to properly position fans from ceiling heights higher than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to rate the fan at 8 feet (one foot have to be allowed for the distance through the top in the fan motor towards the switch housing bottom.