42 Inch Outdoor Ceiling Fan – Hunter ceiling fans are unquestionably the very best you should buy, here we have build all the details you may want to understand ceiling fans before purchasing, please be aware that there are additional ceiling fan manufacturers available who copy Hunter ceiling fan designs however they are nowhere close to as good, the materials they’ll use usually are not as good quality and they also cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just just like a Hunter,” remember all ceiling fans usually are not good quality. Most Hunter ceiling fans possess a reverse option that’s particularly important to cut back heating bills in the winter, warm air might be directed down to where it is needed by spinning the ceiling fan clockwise. Some points to take into account when purchasing a ceiling fan: How much air is actually being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is really a comfort to no person. One from the recommendations for proper air movement is blade pitch. The greater the pitch-the angle from the blade-the higher the environment movement supplying the blade pitch has been properly harmonized while using motor. Unlike Hunter some manufacturers skimp on materials and do not use just right or powerful enough motors to aid proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to cut back the stress on undersized or under-powered motors. Many fans also employ extra thin blades to cut back cost. The reduced blade surface area means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes plus the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors may use little energy, but they also move little or no air, resulting in very inefficient fans, Hunter fans are built to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created whenever a ceiling fan is running is truly the consequence of poor engineering design along with a deficiency of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to cut back cost, despite the fact that they are a common source of operating noise. A deficiency of proper dampening between metal parts also can create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime source of wobble. Blades that usually are not matched in carefully weighed and balanced sets also can wobble. Inconsistent blade mounting brackets can create varying levels of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that can easily get free from balance, generating wobble from your very heart from the fan. Inexpensive mounting systems with pin fasteners also can bring about wobble. Hunter fans possess a patented wobble free canopy this means Hunter fans are always straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch usually are not specified and matched correctly. Improperly attached to/off pull chains can become faulty and be brought out from the housing. Inadequate quality, testing, manufacturing and inspection procedures send low quality fans to market. Defective motor windings can lead to electrical shorts inside the motor. Low quality fan bearings might be “shielded” somewhere only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and brown spots set out to appear. You may even notice the brass around the fan is really a different colour as opposed to light kit you just added! Quality brass along with other metallic finishes add a compilation of grinding and buffing steps between multiple plating processes. To help determine the quality of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the surface spot easily? If so, stay away from the fan. Can you’re feeling an even protective coating? That’s a sign from the kind of quality you will discover inside the famous Hunter Bright Brass Finish.
What could be the minimum height I need in my room to place up a follower? Safety standards declare that the min height from your floor on the bottom from the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you possess a low ceiling, just really be sure that they are above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that type of record to face on. So you have the reassurance of knowing you have got the very best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the harder air which is being moved. The air moved with the fan produces a wind chill effect that produces you’re feeling convenient in the warm room. There is really a direct relationship between air movement and comfort – the harder air moved, the higher the wind chill effect. Hunter fans generally move more air than competitive models because of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, with a few additional wind noise associated with 5-blade fans. For a given motor, a 4-blade fan will move more air compared to a 5-blade fan. The 5th blade puts additional drag around the motor, slowing the RPM from the blades, which decreases the CFM. All Hunter fans, whether 4 to 5 blades, are prepared for optimal air delivery. How do I know what size fan to get – there are numerous sizes available? You need to choose the best size fan for a room to acquire optimum looks, comfort as well as savings. If the fan is way too small to the room, it doesn’t move enough air to make you’re feeling comfortable. If the fan is way too big, it could possibly move an excessive amount of air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use no less than 56″ Ceiling fan
Why do some fans require oil and others do not? The Hunter Original carries a very unique motor which uses an oil-bath lubrication system. This system keeps the main bearings lubricated all the time, for quiet operation and long-life. It is part from the reason this fan carries a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside the market in comparison with all the fans? The Hunter Original could be the most unique ceiling fan around the market, which has a design that goes back on the turn from the 20th century. Cast iron can be used inside the motor housing construction to better draw heat away from your electrical windings; heat is really a major enemy of electrical motors. The extra weight from the cast-iron construction also reduces the risk of fan wobble. The motor can be greater than another ceiling fan, making it the best motor available. This allows the blades to become pitched in a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the key moving components from the motor, and prolongs the life span from the motor. Added up, these unique design elements produce a powerful, quiet fan which is backed by way of a limited lifetime warranty.
How do fans cool the area – do they actually lower the temperature? A ceiling fan cools by setting up a wind chill effect; no lower the area temperature. Wind chill effect makes you’re feeling cooler by accelerating the evaporation of perspiration on your skin. It could be the feeling you will get when you open the window in the moving car. If you possess a ceiling fan in the room whose temperature is 80 degrees, running the fan can create a wind chill effect that produces you’re feeling as though the temperature is 72 degrees. When used in conjunction by having an air conditioning unit, a ceiling fan can lower energy costs, since set the thermostat of your air conditioning unit in a higher temperature.
Can the ceiling fan be used in the winter for virtually any beneficial purpose? A ceiling fan might help lower energy consumption in the winter by approximately 15%. The temperature from the air in the heated room varies in layers; the environment near the ceiling is warmer as opposed to air near the floor, because warm air rises. A ceiling fan might help push the warmer air which is trapped near the ceiling back down into the area, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it is needed, and the furnace does not overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan ought to be run in the clockwise direction. This pushes the environment facing the ceilings and along the walls, to carefully re-circulate the warm air without setting up a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan run on high speed will consume less power compared to a 100-watt bulb. How much can I expect you’ll save in heating as well as cooling costs? A ceiling fan can help to conserve approximately 95% on cooling costs for a new install and 47% with an existing ac system. It also can save approximately 15% on heating costs. Savings will vary based on energy rates. How easy is really a ceiling fan to set up? Most people will get a mason to set up a ceiling fan, it might be a DIY project but please keep in mind you will need to become able to: Locate a 2″ x 4″ or any other suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh under 8kg)
What is covered with the fan warranty – how can the Hunter warranty rival other fan company warranties? Most fan warranties are limited warranties that cover the motor parts to the stated life from the warranty; which is, a 20-year warranty will handle the motor parts for 20 years. Labour to the motor is generally covered for 1-year, as are parts and labour for all the components from the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 many years of experience behind its warranties. Can my fan be adjusted by remote control? Most ceiling fans might be adjusted by having an accessory remote control sold separately from your fan. In fact, controllers really can improve the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible from your comfort of your favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either while using fan during new installations or on fans which have been previously installed along with use for quite a while. The installation is a straightforward, do-it-yourself project and does not require any professional wiring. Remote control kits add a handheld transmitter for sending commands on the fan along with a receiver which either conceals inside fan canopy or mounts just beneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away from your fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans might be attached to angled or vaulted ceilings by using a follower canopy (the “cap” visible closest on the ceiling which takes care of the electrical box) which has been made to accommodate sloped ceilings. Many quality fans includes such a adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but if not included while using fan at original purchase, accessory canopy adapters are offered separately at stores. What length drop rod should I use with my fan? Will the fan be at risk of wobble if I utilize a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot to the dimension from the fan. So if your ceiling height is 12 feet, you want a 3 foot drop rod in order to properly position the fan 8 feet from your floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the risk of wobble. Think of a grandfather clock pendulum as well as slow, heavy swing versus an inferior clock pendulum which has a fast, unsteady swing. Weight and length combine to create stability, reducing wobble, whether it is in the ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated by way of a certain form of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in the way that does not produce a hum. Variable fan speed controls, which build a speed control “range” from low to high, are operated by solid state electronics. Variable controls can create a hum because they control the fan’s speed in the different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan along with a light kit be controlled from your same wall switch? The answer here is determined by how your wall switch is currently wired. If you possess a single wall switch with two wires (one black, one white), the solution is “no” if you do not obtain a control specifically made for such a switch (Hunter offers three models). The answer is “yes” if you possess a three wire set-up inside the single wall switch and obtain a more common, dual control that may operate a follower and light-weight separately from one particular switch. Having a mason put in a third wire might be expensive. What could be the difference in having a ceiling fan installed close on the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans ought to be installed approximately 8 to 9 feet above the floor. Extension drop rods are used to properly position fans from ceiling heights in excess of 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to position the fan at 8 feet (one foot has to be allowed to the distance from your top from the fan motor on the switch housing bottom.