Dans Ceiling Fans – Hunter ceiling fans are undoubtedly the very best you can purchase, take a look at have assembled every piece of information you need to know about ceiling fans before purchasing, please bear in mind that there are other ceiling fan manufacturers available who copy Hunter ceiling fan designs but they’re nowhere close to good, the types of materials they will use aren’t as good quality and they cannot copy hunter ceiling fans patents including whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so even though many ceiling fans may look “just just like a Hunter,” remember all ceiling fans aren’t good quality. Most Hunter ceiling fans have a reverse option that is especially important to lessen heating bills in the winter, hot air could be directed as a result of where it’s essental to spinning the ceiling fan clockwise. Some points to consider when buying a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy could be the fan? Will the fan wobble? How long will the fan last? How durable could be the finish? Will the manufacturer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that appears nice but moves little air is often a comfort to nobody. One with the keys to proper air movement is blade pitch. The greater the pitch-the angle with the blade-the more mid-air movement supplying the blade pitch has been properly harmonized with all the motor. Unlike Hunter some manufacturers skimp on materials , nor use just right or powerful enough motors to compliment proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to lessen the stress on undersized or under-powered motors. Many fans also employ extra thin blades to lessen cost. The reduced blade floor means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a fan consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors might use little energy, in addition they move almost no air, producing very inefficient fans, Hunter fans are made to shift a lot of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is often the consequence of poor engineering design as well as a lack of precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to lessen cost, despite the fact that these are a common way to obtain operating noise. A lack of proper dampening between metal parts could also create and intensify noise, as can using extra thin sheet metal motor and mounting system parts. Hunter fans just use the very best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime way to obtain wobble. Blades that aren’t matched in carefully weighed and balanced sets could also wobble. Inconsistent blade supports can produce varying examples of pitch (blade angle), throwing a fan into an unbalanced wobble. And poorly manufactured motors have rotors that may easily escape balance, generating wobble in the very heart with the fan. Inexpensive mounting systems with pin fasteners could also contribute to wobble. Hunter fans have a patented wobble free canopy which suggests Hunter fans will almost always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly set up on/off pull chains could become faulty and be got out with the housing. Inadequate quality, testing, manufacturing and inspection procedures send bad quality fans to showcase. Defective motor windings can result in electrical shorts within the motor. Low quality fan bearings may be “shielded” on the one hand only, allowing dust to get in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are employed to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look fantastic. Then tarnish and liver spots set out to appear. You may even spot the brass around the fan is often a different colour than the light kit you only added! Quality brass and other metallic finishes will include a number of grinding and buffing steps between multiple plating processes. To help determine the caliber of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, stay away from the fan. Can you really feel an easy protective coating? That’s a sign with the kind of quality you’ll find within the famous Hunter Bright Brass Finish.
What could be the minimum height I need in my room to set up a fan? Safety standards declare that the min height in the floor to the bottom with the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans with a lifetime limited motor warranty, and backs that warranty with nearly 120 years within the ceiling fan business. No other manufacturer has that type of record to stand on. So you have the comfort of knowing you have got the very best-backed warranty within the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet for each minute. The greater the CFM, the greater air that’s being moved. The air moved through the fan creates a wind chill effect that creates you really feel much more comfortable in a warm room. There is often a direct relationship between air movement and comfort – the greater air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What could be the difference from a four and five blade ceiling fan? The main difference from a 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise related to 5-blade fans. For a given motor, a 4-blade fan will move more air than a 5-blade fan. The 5th blade puts additional drag around the motor, scaling down the RPM with the blades, which decreases the CFM. All Hunter fans, whether 4 or 5 blades, focus on optimal air delivery. How do I determine what size fan to buy – there are so many sizes available? You need to choose the best size fan for a room to get optimum looks, comfort and energy savings. If the fan is way too small to the room, it won’t move enough air to make you really feel comfortable. If the fan is way too big, it may move excessive air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at the very least 56″ Ceiling fan
Why perform some fans require oil yet others don’t? The Hunter Original carries a very unique motor which utilizes an oil-bath lubrication system. This system keeps the principle bearings lubricated at all times, for quiet operation and long-life. It is part with the reasons why this fan carries a limited lifetime motor warranty. Most other fans use motors that don’t require oil. What makes the Hunter Original so unique within the market when compared with other fans? The Hunter Original could be the most unique ceiling fan around the market, with a design that extends back to the turn with the last century. Cast iron is employed within the motor housing construction to more efficiently draw heat away in the electrical windings; heat is often a major enemy of electrical motors. The extra weight with the cast-iron construction also cuts down on risk of fan wobble. The motor is also greater than some other ceiling fan, rendering it the best motor available. This allows the blades to be pitched with a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the most important moving components with the motor, and prolongs the life with the motor. Added up, these unique design elements make a powerful, quiet fan that’s backed by way of a limited lifetime warranty.
How do fans cool the area – will they actually lower the temperature? A ceiling fan cools by making a wind chill effect; it doesn’t lower the area temperature. Wind chill effect makes you really feel cooler by accelerating the evaporation of perspiration onto the skin. It could be the feeling you get if you open of the question in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can produce a wind chill effect that creates you really feel just as if the temperature is 72 degrees. When found in conjunction with the air conditioning unit, a ceiling fan can lower energy costs, because you can set the thermostat of your air conditioning unit with a higher temperature.
Can the ceiling fan be used in the winter for virtually any beneficial purpose? A ceiling fan can help lower energy consumption in the winter by up to 15%. The temperature with the air in a heated room varies in layers; mid-air nearby the ceiling is warmer than the air nearby the floor, because hot air rises. A ceiling fan can help push the warmer air that’s trapped nearby the ceiling back off into the area, thus de-stratifying the layers of hot air. As a result, the hot air is circulated where it’s needed, and also the home heating doesn’t overwork to warm the area. To properly de-stratify a warmed room, the ceiling fan must be run in a clockwise direction. This pushes mid-air up against the ceilings and along the walls, to carefully re-circulate the hot air without making a cooling wind chill effect.
How much electricity will a fan use? On average, a ceiling fan run on broadband will consume less power than a 100-watt light bulb. How much can I expect you’ll save in heating and or cooling costs? A ceiling fan can conserve up to 95% on cooling costs for a new install and 47% with an existing ac system. It could also save up to 15% on heating costs. Savings will be different based on energy rates. How easy is often a ceiling fan to install? Most people will get an electrician to install a ceiling fan, it could be a DIY project but please take into account you will need to be able to: Locate a 2″ x 4″ and other suitable support within the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh below 8kg)
What is roofed through the fan warranty – how does the Hunter warranty compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts to the stated life with the warranty; that’s, a 20-year warranty will cover the motor parts for 20 years. Labour to the motor is generally covered for 1-year, much like parts and labour for other components with the fan. All Hunter fans are backed by way of a “limited lifetime motor warranty.” Most importantly, Hunter could be the only fan company with over 115 numerous years of experience behind its warranties. Can my fan be adjusted by remote device? Most ceiling fans could be adjusted with the accessory remote device sold separately in the fan. In fact, controllers can definitely increase the performance and operating flexibility of ceiling fans since many include one-touch multiple speed settings, instant fan “off” operation, and full range light dimming — all possible in the comfort of your favourite chair or bedside table. Ceiling fan and light-weight controllers can easily be installed either with all the fan during new installations or on fans which were previously installed as well as in use for quite a while. The installation is a simple, do-it-yourself project and doesn’t require any professional wiring. Remote control kits will include a handheld transmitter for sending commands to the fan as well as a receiver which either conceals inside fan canopy or mounts just underneath the ceiling. Remote controls can operate the fan or light reliably up to 40 feet away in the fan.
Can ceiling fans be mounted on angled or vaulted ceilings? Yes, ceiling fans could be set up on angled or vaulted ceilings by using a fan canopy (the “cap” visible closest to the ceiling which provides coverage for the electrical box) which has been designed to accommodate sloped ceilings. Many quality fans will include this kind of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included with all the fan at original purchase, accessory canopy adapters are offered separately at stores. What length drop rod should I use with my fan? Will the fan become more at risk of wobble if I work with a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot to the dimension with the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod so that you can properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the risk of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus a smaller clock pendulum with a fast, unsteady swing. Weight and length combine to make stability, reducing wobble, whether it’s in a ceiling fan or a clock pendulum.
Why does my fan “hum” when I installed an adjustable speed (solid state) control? Most quality ceiling fans are operated by way of a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that doesn’t make a hum. Variable fan speed controls, which develop a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum since they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are appropriate for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled in the same wall switch? The answer here is dependent upon how your wall switch happens to be wired. If you have a single wall switch with two wires (one black, one white), the answer is “no” unless you purchase a control created for this kind of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up within the single wall switch and purchase a more common, dual control that will operate a fan and light-weight separately from one particular switch. Having an electrician purchase a third wire could be expensive. What could be the difference in having a ceiling fan installed close to the ceiling versus on the drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet above the floor. Extension drop rods are employed to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would wish a 3 foot drop rod to put the fan at 8 feet (one foot has to be allowed to the distance in the top with the fan motor to the switch housing bottom.