Hunter Universal Ceiling Fan Remote – Hunter ceiling fans are unquestionably the best you should buy, ideas have put together every piece of information you will need to know about ceiling fans before purchasing, please keep in mind there are many ceiling fan manufacturers around who copy Hunter ceiling fan designs however they are nowhere near as good, materials they’ll use aren’t as good quality and so they cannot copy hunter ceiling fans patents like whisper-wind and wobble-free technology, no-one else can match the Hunter lifetime warranty around the motor either, so although many ceiling fans may look “just like a Hunter,” remember all ceiling fans aren’t made the same. Most Hunter ceiling fans have a reverse option which can be particularly important to relieve heating bills during the cold months, warm air can be directed into where it is needed by spinning the ceiling fan clockwise. Some points to think about when choosing a ceiling fan: How much air is really being circulated? How efficiently will the fan move air? How quiet or noisy is the fan? Will the fan wobble? How long will the fan last? How durable is the finish? Will producer stand behind the warranty?
Many Fans Move Very Little Air. A ceiling fan that looks nice but moves little air is often a comfort to no-one. One of the secrets of proper air movement is blade pitch. The greater the pitch-the angle of the blade-the more air movement providing the blade pitch has become properly harmonized using the motor. Unlike Hunter some manufacturers skimp on materials , nor use just right or powerful enough motors to guide proper blade pitch. So they compromise on blade pitch, sacrificing proper air movement to relieve the strain on undersized or under-powered motors. Many fans also have extra thin blades to relieve cost. The reduced blade surface means reduced air movement.
Why Many Fans Are Less Efficient. The amount of energy a follower consumes in addition to the level of air the fan moves determines the fan’s overall efficiency. Small, low wattage motors could use little energy, but they also move little or no air, causing very inefficient fans, Hunter fans are created to shift a great deal of air.
Why Many Fans Are Noisy. An electrical humming created each time a ceiling fan is running is usually the consequence of poor engineering design as well as a insufficient precision manufacturing. Some manufacturers use generic, inexpensive ball bearings to relieve cost, despite the fact that these are a typical method to obtain operating noise. A insufficient proper dampening between metal parts may also create and intensify noise, as can the application of extra thin sheet metal motor and mounting system parts. Hunter fans don’t use anything but the best materials available.
Why Many Fans Wobble. Many factors can produce fan wobble. Substandard blade materials and improper blade sealing can produce blades that absorb moisture and warp-a prime method to obtain wobble. Blades that aren’t matched in carefully weighed and balanced sets may also wobble. Inconsistent blade mounting brackets can produce varying examples of pitch (blade angle), throwing a follower into an unbalanced wobble. And poorly manufactured motors have rotors that may easily escape balance, generating wobble in the very heart of the fan. Inexpensive mounting systems with pin fasteners may also contribute to wobble. Hunter fans have a patented wobble free canopy which means Hunter fans will always be straight.
Common Reasons Substandard Fans Break Down Prematurely. Motor size and blade pitch aren’t specified and matched correctly. Improperly set up on/off pull chains could become faulty and turn into brought out of the housing. Inadequate quality, testing, manufacturing and inspection procedures send poor quality fans to market. Defective motor windings can result in electrical shorts inside the motor. Low quality fan bearings could possibly be “shielded” somewhere only, allowing dust to go in and cause premature failure. Inexpensive materials, poor engineering, and substandard manufacturing processes are used to create “bargain” fans.
Why Brass Finishes Are Not Alike. In the beginning all brass finishes look good. Then tarnish and dark spots start to appear. You may even notice the brass around the fan is often a different colour than the light kit you merely added! Quality brass and other metallic finishes add a number of grinding and buffing steps between multiple plating processes. To help determine the grade of a plated finish, go through the surface closely for scratches or unevenness of finish. Does the top spot easily? If so, avoid the fan. Can you feel an easy protective coating? That’s a sign of the kind of quality you will find inside the famous Hunter Bright Brass Finish.
What is the minimum height I need in my room that will put up a follower? Safety standards claim that the min height in the floor to the bottom of the fan blades has to be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a low ceiling, just really make certain that they may be above head height.
Why a Hunter ceiling fan warranty makes a difference. Hunter backs its fans which has a lifetime limited motor warranty, and backs that warranty with nearly 120 years inside the ceiling fan business. No other manufacturer has that type of record to square on. So you have the comfort of knowing you’ve got the best-backed warranty inside the business!
How much air do ceiling fans move? Ceiling fan air movement is measured in CFM, or cubic feet each and every minute. The greater the CFM, greater air that is certainly being moved. The air moved by the fan results in a wind chill effect that creates you feel much more comfortable in a warm room. There is often a direct relationship between air movement and comfort – greater air moved, the more the wind chill effect. Hunter fans generally move more air than competitive models as a consequence of custom-engineered motors and blades pitched at the maximum possible angle.
What is the difference from your four and five blade ceiling fan? The main difference from your 4-blade and 5-blade fan is aesthetics, by incorporating additional wind noise connected with 5-blade fans. For a given motor, a 4-blade fan will move more air when compared to a 5-blade fan. The 5th blade puts additional drag around the motor, scaling down the RPM of the blades, which decreases the CFM. All Hunter fans, whether four or five blades, are prepared for optimal air delivery. How do I determine what size fan to purchase – there are numerous sizes available? You need to select the right size fan for the room to acquire optimum looks, comfort and savings. If the fan is way too small for that room, it won’t move enough air to make you feel comfortable. If the fan is way too big, it could possibly move too much air. Hunter recommends the following: 100 sq foot 30″-42″ Ceiling fan. 400 sq foot 48″-54″ Ceiling fan. Larger rooms use at least 56″ Ceiling fan
Why carry out some fans require oil yet others do not? The Hunter Original features a very unique motor that uses an oil-bath lubrication system. This system keeps the main bearings lubricated always, for quiet operation and long-life. It is part of the reason why this fan features a limited lifetime motor warranty. Most other fans use motors that do not require oil. What makes the Hunter Original so unique inside the market when compared with all the fans? The Hunter Original is the most unique ceiling fan around the market, which has a design that dates back to the turn of the 20th century. Cast iron can be used inside the motor housing construction to better draw heat away in the electrical windings; heat is often a major enemy of electrical motors. The extra weight of the cast-iron construction also cuts down on possibility of fan wobble. The motor is also bigger than any other ceiling fan, making it the most powerful motor available. This allows the blades to get pitched at a 15 degree angle, which produces greater air movement with less noise. The oil-bath lubrication system protects the major moving components of the motor, and prolongs the life span of the motor. Added up, these unique design elements produce a powerful, quiet fan that is certainly backed with a limited lifetime warranty.
How do fans cool the space – would they actually lower the temperature? A ceiling fan cools by making a wind chill effect; no lower the space temperature. Wind chill effect makes you feel cooler by accelerating the evaporation of perspiration on the skin. It is the feeling you will get if you open the window in a moving car. If you have a ceiling fan in a room whose temperature is 80 degrees, running the fan can produce a wind chill effect that creates you feel as if the temperature is 72 degrees. When employed in conjunction with the air conditioner, a ceiling fan can lower energy costs, because you can set the thermostat of your respective air conditioner at a higher temperature.
Can the ceiling fan be used during the cold months for almost any beneficial purpose? A ceiling fan might help lower energy consumption during the cold months by approximately 15%. The temperature of the air in a heated room varies in layers; air close to the ceiling is warmer than the air close to the floor, because warm air rises. A ceiling fan might help push the warmer air that is certainly trapped close to the ceiling back into the space, thus de-stratifying the layers of warm air. As a result, the warm air is circulated where it is needed, as well as the heating system will not overwork to warm the space. To properly de-stratify a warmed room, the ceiling fan must be run in a clockwise direction. This pushes air up against the ceilings and on the walls, to gently re-circulate the warm air without making a cooling wind chill effect.
How much electricity will a follower use? On average, a ceiling fan operate on broadband will consume less power when compared to a 100-watt light bulb. How much can I anticipate to save in heating as well as cooling costs? A ceiling fan can save approximately 95% on cooling costs for the new install and 47% by using an existing air conditioning system. It may also save approximately 15% on heating costs. Savings will change based on energy rates. How easy is often a ceiling fan to setup? Most people is certain to get an electrical contractor to setup a ceiling fan, it can be a DIY project but please take into account you will need to get able to: Locate a 2″ x 4″ or another suitable support inside the ceiling. Drill holes and install wood screws. Identify and connect electrical wires. Lift the fan (most weigh lower than 8kg)
What is covered by the fan warranty – how can the Hunter warranty can compare to other fan company warranties? Most fan warranties are limited warranties that go over the motor parts for that stated life of the warranty; that is certainly, a 20-year warranty will handle the motor parts for 20 years. Labour for that motor is generally covered for 1-year, much like parts and labour for all the components of the fan. All Hunter fans are backed with a “limited lifetime motor warranty.” Most importantly, Hunter is the only fan company with more than 115 a lot of experience behind its warranties. Can my fan be adjusted by handheld remote control? Most ceiling fans can be adjusted with the accessory handheld remote control sold separately in the fan. In fact, remote controls will surely improve the performance and operating flexibility of ceiling fans since several include one-touch multiple speed settings, instant fan “off” operation, and huge selection light dimming — all possible in the comfort of your respective favourite chair or bedside table. Ceiling fan and light remote controls can easily be installed either using the fan during new installations or on fans that have been previously installed and in use for a long time. The installation is a simple, do-it-yourself project and will not require any professional wiring. Remote control kits add a handheld transmitter for sending commands to the fan as well as a receiver which either conceals inside the fan canopy or mounts underneath the ceiling. Remote controls can operate the fan or light reliably approximately 40 feet away in the fan.
Can ceiling fans be placed on angled or vaulted ceilings? Yes, ceiling fans can be set up on angled or vaulted ceilings by using a follower canopy (the “cap” visible closest to the ceiling which takes care of the electrical box) which has become meant to accommodate sloped ceilings. Many quality fans will incorporate this sort of adjustable canopy, like Hunter’s Installer’s Choice and HandsFree? Canopy systems, but when not included using the fan at original purchase, accessory canopy adapters are offered separately at stores. What length drop rod should I use with my fan? Will the fan be a little more prone to wobble if I use a drop rod? See chart above. A general formula for calculating drop rod length is: ceiling height in feet minus 9′ = drop rod length. This formula is based around the fan-to-floor distance of 8 feet plus 1 foot for that dimension of the fan. So if your ceiling height is 12 feet, you’ll need a 3 foot drop rod as a way to properly position the fan 8 feet in the floor. Using long-length drop rods for fan installations actually help stabilize fans reducing the possibility of wobble. Think of a grandfather clock pendulum and its particular slow, heavy swing versus an inferior clock pendulum which has a fast, unsteady swing. Weight and length combine to produce stability, reducing wobble, whether it is in a ceiling fan or even a clock pendulum.
Why does my fan “hum” when I installed a flexible speed (solid state) control? Most quality ceiling fans are operated with a certain kind of electrical control system called capacitors. Capacitor electronics in ceiling fans create distinct speed “steps” like high, medium, and low. Capacitors control the fan speed in a way that will not produce a hum. Variable fan speed controls, which produce a speed control “range” from low to high, are operated by solid state electronics. Variable controls can produce a hum because they control the fan’s speed in a different manner. For quiet fan operation, capacitor type fan controls are recommended for most ceiling fan installations. Can a ceiling fan as well as a light kit be controlled in the same wall switch? The answer here depends upon how your wall switch happens to be wired. If you have a single wall switch with two wires (one black, one white), the reply is “no” if you don’t purchase a control specifically designed for this sort of switch (Hunter offers three models). The answer is “yes” if you have a three wire set-up inside the single wall switch and purchase a more common, dual control that may operate a follower and light separately from an individual switch. Having an electrical contractor install a third wire can be expensive. What is the difference in having a ceiling fan installed close to the ceiling versus over a drop rod. For maximum performance and greatest energy savings, ceiling fans must be installed approximately 8 to 9 feet across the floor. Extension drop rods are used to properly position fans from ceiling heights greater than 8 feet. For example, a 12 foot ceiling would want a 3 foot drop rod to rate the fan at 8 feet (one foot has to be allowed for that distance in the top of the fan motor to the switch housing bottom.